DSL Modems / Routers

Teltonika RUT206 Wireless 4G Router

Key features:

  • 4G Category 4, 3G, 2G
  • RS232 & RS485 serial communication
  • 2-pin power input
  • Active and passive PoE inputs
See full description
243 30
Delivery Wed, 01 Jul - Tue, 07 Jul
14,00 €   shipping cost
Sent from Greece
From Getters 4.5 (99)
Greece
5 pieces
See Networking on the page of Getters

Description

Description

The RUT206 is a compact industrial router that supports RS232 and RS485 serial interfaces, along with active and passive PoE inputs. Its rugged design, 2-pin power input, and expandable data storage via a microSD slot make it an ideal choice for a range of IoT and M2M applications. This 4G Cat 4 router features open-source RutOS software and supports key industrial protocols such as Modbus, DNP3, and DLMS.

  • CONNECTIVITY: 4G Category 4, 3G, 2G
  • SERIAL INTERFACES: RS232 & RS485 for serial communication
  • 2-PIN POWER INPUT: Simple and suitable for industrial applications
  • PoE: Active and passive PoE inputs
  • 4G LTE Category 4 up to 150 DL/50 UL Mbps. 3G up to 21 DL/5.76 UL Mbps. 2G up to 236.8 DL/236.8 UL kbps
  • 3GPP Version: Release 9
  • 2 SIM cards, automatic switching slots: weak signal, data limit, SMS limit, roaming, no network, network denial, data connection failure, SIM card idle protection
  • IMSI, ICCID, operator, operator status, data connection status, network type, bandwidth, connected zone, signal strength (RSSI), SINR, RSRP, RSRQ, EC/IO, RSCP, transmitted/received data, LAC, TAC, cell ID, ARFCN, UARFCN, EARFCN, MCC, and MNC
  • SMS status, SMS configuration, EMAIL to SMS, SMS to EMAIL, SMS to HTTP, SMS to SMS, scheduled SMS, automatic SMS reply, SMPP
  • USSD: Supports sending and reading unstructured supplementary service data messages
  • Blocked/allowed operator list (by country or individual operators)
  • Band lock, used band status indicator
  • Provides the ability to configure the router to periodically switch to the unused SIM card and establish a data connection to prevent SIM card blocking.
  • SIM card PIN management allows setting, changing, or disabling the SIM PIN
  • Automatic APN
  • Immediate connection (bridge) between the mobile internet service provider and the device on the local network (LAN)
  • The router assigns the mobile WAN IP address to another device on the LAN
  • 802.11b/g/n (Wi-Fi 4), Access Point (AP), Station (STA)
  • WPA2-Enterprise: PEAP, WPA2-PSK, WPA-EAP, WPA-PSK, WPA3-SAE, WPA3-EAP, OWE; AES-CCMP, TKIP, automatic encryption functions, client separation, EAP-TLS with PKCS#12 certificates, automatic reconnection disabled, 802.11w Protected Management Frames (PMF)
  • SSID/ESSID: SSID hiding mode and MAC address-based access control
  • Wi-Fi users: Up to 50 simultaneous connections
  • Wireless MAC filter: Allowed list, blocked list
  • Wireless QR code generator: Once scanned, the user will automatically connect to your network without needing to enter login details.
  • TravelMate: Redirects Wi-Fi hotspot destination page to the next connected device
  • 1 WAN port 10/100 Mbps, compliant with IEEE 802.3, IEEE 802.3u, 802.3az standards, supports automatic crossover MDI/MDIX
  • 1 x LAN port, 10/100 Mbps, compliant with IEEE 802.3, IEEE 802.3u, 802.3az standards, supports automatic crossover MDI/MDIX
  • Network protocols: TCP, UDP, IPv4, IPv6, ICMP, NTP, DNS, HTTP, HTTPS, SFTP, FTP, SMTP, SSL v3, TLS, ARP, VRRP, PPP, PPPoE, UPNP, SSH, DHCP, Telnet, SMPP, SNMP, MQTT, Wake-on-LAN (WOL), VXLAN

Manufacturer

See full description

Specifications

Specifications

Network Specifications

Type
4G/5G Router
Mobile Network
4G
Portable Hotspot
No

Connectivity

Wireless network
Yes
ISDN Connection
No
SIM slot
Yes

Security

MAC Address Filtering
Yes

Extras

Virtual Private Network (VPN)
Yes
VoIP
No
Mesh
No

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

See all specifications

Description & Specifications

The RUT206 is a compact industrial router that supports RS232 and RS485 serial interfaces, along with active and passive PoE inputs. Its rugged design, 2-pin power input, and expandable data storage via a microSD slot make it an ideal choice for a range of IoT and M2M applications. This 4G Cat 4 router features open-source RutOS software and supports key industrial protocols such as Modbus, DNP3, and DLMS.

  • CONNECTIVITY: 4G Category 4, 3G, 2G
  • SERIAL INTERFACES: RS232 & RS485 for serial communication
  • 2-PIN POWER INPUT: Simple and suitable for industrial applications
  • PoE: Active and passive PoE inputs
  • 4G LTE Category 4 up to 150 DL/50 UL Mbps. 3G up to 21 DL/5.76 UL Mbps. 2G up to 236.8 DL/236.8 UL kbps
  • 3GPP Version: Release 9
  • 2 SIM cards, automatic switching slots: weak signal, data limit, SMS limit, roaming, no network, network denial, data connection failure, SIM card idle protection
  • IMSI, ICCID, operator, operator status, data connection status, network type, bandwidth, connected zone, signal strength (RSSI), SINR, RSRP, RSRQ, EC/IO, RSCP, transmitted/received data, LAC, TAC, cell ID, ARFCN, UARFCN, EARFCN, MCC, and MNC
  • SMS status, SMS configuration, EMAIL to SMS, SMS to EMAIL, SMS to HTTP, SMS to SMS, scheduled SMS, automatic SMS reply, SMPP
  • USSD: Supports sending and reading unstructured supplementary service data messages
  • Blocked/allowed operator list (by country or individual operators)
  • Band lock, used band status indicator
  • Provides the ability to configure the router to periodically switch to the unused SIM card and establish a data connection to prevent SIM card blocking.
  • SIM card PIN management allows setting, changing, or disabling the SIM PIN
  • Automatic APN
  • Immediate connection (bridge) between the mobile internet service provider and the device on the local network (LAN)
  • The router assigns the mobile WAN IP address to another device on the LAN
  • 802.11b/g/n (Wi-Fi 4), Access Point (AP), Station (STA)
  • WPA2-Enterprise: PEAP, WPA2-PSK, WPA-EAP, WPA-PSK, WPA3-SAE, WPA3-EAP, OWE; AES-CCMP, TKIP, automatic encryption functions, client separation, EAP-TLS with PKCS#12 certificates, automatic reconnection disabled, 802.11w Protected Management Frames (PMF)
  • SSID/ESSID: SSID hiding mode and MAC address-based access control
  • Wi-Fi users: Up to 50 simultaneous connections
  • Wireless MAC filter: Allowed list, blocked list
  • Wireless QR code generator: Once scanned, the user will automatically connect to your network without needing to enter login details.
  • TravelMate: Redirects Wi-Fi hotspot destination page to the next connected device
  • 1 WAN port 10/100 Mbps, compliant with IEEE 802.3, IEEE 802.3u, 802.3az standards, supports automatic crossover MDI/MDIX
  • 1 x LAN port, 10/100 Mbps, compliant with IEEE 802.3, IEEE 802.3u, 802.3az standards, supports automatic crossover MDI/MDIX
  • Network protocols: TCP, UDP, IPv4, IPv6, ICMP, NTP, DNS, HTTP, HTTPS, SFTP, FTP, SMTP, SSL v3, TLS, ARP, VRRP, PPP, PPPoE, UPNP, SSH, DHCP, Telnet, SMPP, SNMP, MQTT, Wake-on-LAN (WOL), VXLAN

Manufacturer

Network Specifications

Type
4G/5G Router
Mobile Network
4G
Portable Hotspot
No

Connectivity

Wireless network
Yes
ISDN Connection
No
SIM slot
Yes

Security

MAC Address Filtering
Yes

Extras

Virtual Private Network (VPN)
Yes
VoIP
No
Mesh
No

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

243,30 €
14,00 €   shipping cost