Sunlu PLA+ filament is designed for 3D printing and has an impact strength of 8 kJ/m². Its low shrinkage and interlayer adhesion help produce consistent prints, while it is designed to reduce the risk of nozzle clogging, air bubbles, tangling, warping, and excessive stringing. Its diameter has a dimensional accuracy of ±0.02 mm.

The filament is evenly wound onto a spool to reduce the risk of knots and unwinding issues. It is compatible with FDM 3D printers that support 1.75 mm filament.

• Material: PLA+
• Color: White
• Weight: 1 kg
• Diameter: 1.75 mm
• Packaging: Spool
• Impact strength: 8 kJ/m²
• Dimensional accuracy: ±0.02 mm
• Density: 1.23 g/cm³
• Vicat softening temperature: 54 °C
• Heat deflection temperature (HDT): 53 °C
• Melting temperature: 164 °C
• Melt flow rate: 6.3 g/10 min
• Tensile strength: 64 MPa
• Elongation at break: 17%
• Flexural strength: 86 MPa
• Elastic modulus: 2907 MPa
• IZOD impact strength (X-Y): 3.5 kJ/m²
• Printing speed: 50–100 mm/s or 100–300 mm/s
• Printing temperature: 195–205 °C or 205–220 °C