Skroutz.mt

Kinderkraft Mink Pro Baby Car Seat i-Size with Isofix Grey
Baby Car Seats

Kinderkraft Mink Pro Baby Car Seat i-Size with Isofix Grey Code: KCMIPRFXGRY0000

The Mink Pro car seat is suitable for children from birth up to 13 kg, height 40-75 cm. The child can be safely transported rearward facing (RWF), which is up to five times safer for young children.

...

The Mink Pro car seat is suitable for children from birth up to 13 kg, height 40-75 cm. The child can be safely transported rearward facing (RWF), which is up to five times safer for young children.

The Mink Pro comes with an insert, for smaller children up to 60 cm, filled with memory foam - it will wrap the small child, providing a sense of closeness.

In...

See full description See full description

  • Orientation

    This concerns the direction that the seat is facing. It can be either forward or backward. Additionally, some seats have the ability to rotate and have both directions.

    Rear

    The baby's first car seat should be strictly rear-facing. 2. Until the age of 2 or until the child exceeds the maximum weight allowed for the seat, the baby should face backwards, as the seat serves the correct posture that protects and supports the head, neck, and spine in the event of a collision.
  • Suitable for Height 40-75 cm

  • Number of Harness Attachment Points

    Shows how many points the car seat belt fastens.
  • Seat Weight 3.5 kg
  • See all

User Manual

The product is not available for shipping to the selected country.
Review the product
Product report

Description

Description

The Mink Pro car seat is suitable for children from birth up to 13 kg, height 40-75 cm. The child can be safely transported rearward facing (RWF), which is up to five times safer for young children.

The Mink Pro comes with an insert, for smaller children up to 60 cm, filled with memory foam - it will wrap the small child, providing a sense of closeness.

In addition, the Mink Pro is equipped with two special systems:

H-Guard system, reinforced three-layer headrest and Side Protect System (SPS) with reinforced side protection elements. The car seat has a comfortable carrying handle and can also form a travel system when placed with the stroller frame.

Compatible with R129 i-Size standard.

High safety standard

The MINK PRO car seat meets the latest car seat standard: R129 i-Size. It has also been tested under very strict conditions in crash tests. It can be adjusted in the RWF position or only facing rearward, which is up to five times safer in the event of frontal collisions.

Security

The MINK PRO is a car seat for children up to 75 cm that includes an insert for children up to 60 cm. The insert will wrap around the small child and provide a sense of closeness. At the same time, it will reduce the distance between the shell and the child's body, which improves safety during the journey.

Easy installation

You can easily install the MINK PRO car seat in two ways: using the three-point car safety belt or on the MINK FX ISOFIX base, sold separately.

Safety Systems

The car seat features two special safety systems: H-GUARD and SIDE PROTECT SYSTEM. H-GUARD is a reinforced three-layered headrest that protects the child's head and neck area. On the other hand, SPS is an enhanced side protection that absorbs the force created by a side collision.

Simultaneous adjustment of headrest and safety belt

The headrest can be adjusted simultaneously with the seat belt at 35-52 cm. The soft pads on the seat belt protect the baby's sensitive skin from friction and prevent the belt from slipping over clothes.

Ability to attach the car seat to the stroller

The MINK PRO car seat fits most strollers equipped with universal adapters. With their help, you will attach the car seat to the stroller frame and create a practical travel system.

Manufacturer

Manufacturer Details

Warnings & Safety Information
See full description

Specifications

Specifications

Product Guides

User Manual

Product Number
KCMIPRFXGRY0000

General Information

Type
Egg

Type

Egg

Designed exclusively for infants, with rear-facing only installation for head and back safety. Essential for the maternity hospital and use during the first months.
Facing
Rear

Facing

This concerns the direction that the seat is facing. It can be either forward or backward. Additionally, some seats have the ability to rotate and have both directions.

Rear

The baby's first car seat should be strictly rear-facing. 2. Until the age of 2 or until the child exceeds the maximum weight allowed for the seat, the baby should face backwards, as the seat serves the correct posture that protects and supports the head, neck, and spine in the event of a collision.
Number of Belt Anchor Points
3

Number of Belt Anchor Points

Shows how many points the car seat belt fastens.
Seat Weight
3.5 kg
Colour
Grey

Age group

Child Height
40-75 cm

Details

Manufacturer Colour
Grey
Recline
No

Recline

The seat is properly adjusted to have a tilt. The recline helps prevent the child's head from leaning forward when sleeping.

Some models allow for adjustment of the recline when the child is already seated, while others require adjustment before placing the child in the seat.

It is not recommended for newborns as babies should not be lifted more than 30 degrees due to the potential risk of musculoskeletal problems.
Swivel
No

Swivel

The seat has the ability to make a full rotation (360 degrees) for a change of orientation and immediate access to the child.

2. The rotation capability offers comfort and flexibility to the parent as they have easy access to any orientation the seat has.
Top Tether
No

Top Tether

It is an additional restraint strap located on the top or back of the seat, which holds it in place and reduces forward movement of the seat during a frontal collision, providing additional safety in case of an accident.
With Removable Covers
No
with Base
Yes

Technical Specifications

ADAC Test
Not Available

ADAC Test

ADAC is a company that conducts crash tests and evaluates car seats for safety, ergonomics, functionality, and the presence of harmful substances.
Swedish Plus Test
No

Swedish Plus Test

Considered the strictest crash test worldwide. It focuses on measuring the pressure exerted on the neck, imposing limits that only rear-facing seats can meet.
i-Size
Yes

i-Size

These are new generation seats that offer additional safety in case of side collision.


i-Size seats are designed according to the height, not the weight of the child, allowing them to travel rear-facing for a longer period of time.


i-Size seats do not replace weight-based car seats but offer an additional option. They are recommended for both newborns and older children.
Side Collision Protection
Yes

Side Collision Protection

An integrated system on the side of the seat that reduces the impact force of a side collision, protecting the child from serious injury.

Installation

ISOfix
Yes

ISOfix

It is a system for safely installing a child seat. To apply it, it is necessary for the rear seats of the car to have the corresponding metal receptacles, but all modern cars have them.

2. The isofix system is easier to install compared to seats that do not have it. The seat clicks into the car's receptacles and thus reduces the movement of the seat towards the front in the event of a collision.

3. Most seats that apply to all ages have the isofix system.
Seatbelt
Yes

Seatbelt

The car seat can be installed in the car using the vehicle's seat belt.

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

See all specifications

Description & Specifications

The Mink Pro car seat is suitable for children from birth up to 13 kg, height 40-75 cm. The child can be safely transported rearward facing (RWF), which is up to five times safer for young children.

The Mink Pro comes with an insert, for smaller children up to 60 cm, filled with memory foam - it will wrap the small child, providing a sense of closeness.

In addition, the Mink Pro is equipped with two special systems:

H-Guard system, reinforced three-layer headrest and Side Protect System (SPS) with reinforced side protection elements. The car seat has a comfortable carrying handle and can also form a travel system when placed with the stroller frame.

Compatible with R129 i-Size standard.

High safety standard

The MINK PRO car seat meets the latest car seat standard: R129 i-Size. It has also been tested under very strict conditions in crash tests. It can be adjusted in the RWF position or only facing rearward, which is up to five times safer in the event of frontal collisions.

Security

The MINK PRO is a car seat for children up to 75 cm that includes an insert for children up to 60 cm. The insert will wrap around the small child and provide a sense of closeness. At the same time, it will reduce the distance between the shell and the child's body, which improves safety during the journey.

Easy installation

You can easily install the MINK PRO car seat in two ways: using the three-point car safety belt or on the MINK FX ISOFIX base, sold separately.

Safety Systems

The car seat features two special safety systems: H-GUARD and SIDE PROTECT SYSTEM. H-GUARD is a reinforced three-layered headrest that protects the child's head and neck area. On the other hand, SPS is an enhanced side protection that absorbs the force created by a side collision.

Simultaneous adjustment of headrest and safety belt

The headrest can be adjusted simultaneously with the seat belt at 35-52 cm. The soft pads on the seat belt protect the baby's sensitive skin from friction and prevent the belt from slipping over clothes.

Ability to attach the car seat to the stroller

The MINK PRO car seat fits most strollers equipped with universal adapters. With their help, you will attach the car seat to the stroller frame and create a practical travel system.

Manufacturer

Manufacturer Details

Warnings & Safety Information

Product Guides

User Manual

Product Number
KCMIPRFXGRY0000

General Information

Type
Egg

Type

Egg

Designed exclusively for infants, with rear-facing only installation for head and back safety. Essential for the maternity hospital and use during the first months.
Facing
Rear

Facing

This concerns the direction that the seat is facing. It can be either forward or backward. Additionally, some seats have the ability to rotate and have both directions.

Rear

The baby's first car seat should be strictly rear-facing. 2. Until the age of 2 or until the child exceeds the maximum weight allowed for the seat, the baby should face backwards, as the seat serves the correct posture that protects and supports the head, neck, and spine in the event of a collision.
Number of Belt Anchor Points
3

Number of Belt Anchor Points

Shows how many points the car seat belt fastens.
Seat Weight
3.5 kg
Colour
Grey

Age group

Child Height
40-75 cm

Details

Manufacturer Colour
Grey
Recline
No

Recline

The seat is properly adjusted to have a tilt. The recline helps prevent the child's head from leaning forward when sleeping.

Some models allow for adjustment of the recline when the child is already seated, while others require adjustment before placing the child in the seat.

It is not recommended for newborns as babies should not be lifted more than 30 degrees due to the potential risk of musculoskeletal problems.
Swivel
No

Swivel

The seat has the ability to make a full rotation (360 degrees) for a change of orientation and immediate access to the child.

2. The rotation capability offers comfort and flexibility to the parent as they have easy access to any orientation the seat has.
Top Tether
No

Top Tether

It is an additional restraint strap located on the top or back of the seat, which holds it in place and reduces forward movement of the seat during a frontal collision, providing additional safety in case of an accident.
With Removable Covers
No
with Base
Yes

Technical Specifications

ADAC Test
Not Available

ADAC Test

ADAC is a company that conducts crash tests and evaluates car seats for safety, ergonomics, functionality, and the presence of harmful substances.
Swedish Plus Test
No

Swedish Plus Test

Considered the strictest crash test worldwide. It focuses on measuring the pressure exerted on the neck, imposing limits that only rear-facing seats can meet.
i-Size
Yes

i-Size

These are new generation seats that offer additional safety in case of side collision.


i-Size seats are designed according to the height, not the weight of the child, allowing them to travel rear-facing for a longer period of time.


i-Size seats do not replace weight-based car seats but offer an additional option. They are recommended for both newborns and older children.
Side Collision Protection
Yes

Side Collision Protection

An integrated system on the side of the seat that reduces the impact force of a side collision, protecting the child from serious injury.

Installation

ISOfix
Yes

ISOfix

It is a system for safely installing a child seat. To apply it, it is necessary for the rear seats of the car to have the corresponding metal receptacles, but all modern cars have them.

2. The isofix system is easier to install compared to seats that do not have it. The seat clicks into the car's receptacles and thus reduces the movement of the seat towards the front in the event of a collision.

3. Most seats that apply to all ages have the isofix system.
Seatbelt
Yes

Seatbelt

The car seat can be installed in the car using the vehicle's seat belt.

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.