Skroutz.mt

Spyder Force Black/Grey Motorcycle Helmet Modular ECE 22.06 1600gr with Sun Visor
Motorcycle Helmets

Spyder Force Black/Grey Motorcycle Helmet Modular ECE 22.06 1600gr with Sun Visor Code: 10050-475

The Spyder Force helmet is a flip-up helmet, ideal for users seeking extra convenience and safety while riding. With the ability to open its front part, it makes its use more pleasant, without the...

The Spyder Force helmet is a flip-up helmet, ideal for users seeking extra convenience and safety while riding. With the ability to open its front part, it makes its use more pleasant, without the need to completely remove the helmet during your frequent stops in the city.

Made from thermoplastic material, the helmet offers necessary protection through...

See Description & Specifications See Description & Specifications

Top specs

  • Type

    Modular

    Modular helmets are a combination of a full-face and a jet helmet. They have a mechanism that opens the front part of the helmet, turning it into a jet helmet. They are easy to wear and safer than jet helmets, but less safe than full-face helmets as the helmet breaks into two pieces. The difference between them and Flip-Up helmets is that the lower part is completely removed and does not remain on the helmet. During driving, the front part of the helmet must be closed, and during stops, it can be lifted.

  • Material

    Thermoplastic

    This is a plastic material mainly used in more affordable and entry-level helmets.

    Thermoplastic shells, such as Polycarbonate or ABS, offer basic protection through deformation upon impact, with greater weight and lower production cost compared to composite materials.

  • Certification

    Certification refers to the official inspection that confirms the helmet meets specific safety standards as defined by international organizations (e.g., ECE, DOT). It is an indication that the helmet has been tested and approved for its ability to protect in real collision conditions.

    ECE 22.06

    New European-type safety specification certification "ECE 22.06", which ensures that the helmet is tested at 18 impact check points instead of 6 as was previously the case. It is now considered the most modern and comprehensive standard for helmet safety in Europe.

  • Pinlock (Anti-fog Film)

    Not Supported

    It is not compatible with the Pinlock system, so it cannot be installed. In this case, the helmet does not have the fittings for adding the Pinlock inner visor, which means there is no special protection against fogging or misting of the visor.
  • Color Finish Matt

Size

Size

International

Learn more about invoicing
Review the product
Product report

Description & Specifications

The Spyder Force helmet is a flip-up helmet, ideal for users seeking extra convenience and safety while riding. With the ability to open its front part, it makes its use more pleasant, without the need to completely remove the helmet during your frequent stops in the city.

Made from thermoplastic material, the helmet offers necessary protection through deformation upon impact, although it is slightly heavier compared to jet helmets. It does not feature a Pinlock system, which means there is no special protection against fog or visor misting.

The helmet’s inner lining can be removed and washed, offering ease in maintenance. In addition, it includes an internal sun visor for protection from the sun, which can be slid based on your needs.

The helmet features a Microlock clasp, which makes putting on and taking off the helmet easier, while it is certified according to the ECE 22.06 standard, ensuring its safety for riding conditions.

  • Type: Flip-Up, offers convenience with a front-opening feature.
  • Material: Thermoplastic, provides basic protection in collisions.
  • Removable and washable interior.
  • Sun Visor: Internal sun visor for protection from the sun.
  • Clasp: Microlock for easy handling.
  • Certification: ECE 22.06, the most modern safety standard in Europe.
  • No Bluetooth capability.

SkuDescription|Brand

Manufacturer Details

Warnings & Safety Information
Product Number
10050-475

Dimensions

Type
Modular

Type

Modular

Modular helmets are a combination of a full-face and a jet helmet. They have a mechanism that opens the front part of the helmet, turning it into a jet helmet. They are easy to wear and safer than jet helmets, but less safe than full-face helmets as the helmet breaks into two pieces. The difference between them and Flip-Up helmets is that the lower part is completely removed and does not remain on the helmet. During driving, the front part of the helmet must be closed, and during stops, it can be lifted.
Weight (+/-50 gr)
1600 gr

Weight (+/-50 gr): 1600

Most helmets weigh around 1500gr and some can reach up to 1800gr. Additionally, the material is also an important factor for the weight of the helmet, with carbon helmets being considered lighter.


A helmet weighing over 1450gr is not considered light and is not recommended for long rides.
Colour
Black
Color Finish
Matt
Material
Thermoplastic

Material

Thermoplastic

This is a plastic material mainly used in more affordable and entry-level helmets.

Thermoplastic shells, such as Polycarbonate or ABS, offer basic protection through deformation upon impact, with greater weight and lower production cost compared to composite materials.
Clasp
Microlock

Clasp

Microlock

The helmet has a retractable mechanism that fastens on the other side. 2. With this mechanism, we can easily put on and take off the helmet. 3. Compared to the Double D ring, it is less durable and more prone to breakage.
Certification
ECE 22.06

Certification

Certification refers to the official inspection that confirms the helmet meets specific safety standards as defined by international organizations (e.g., ECE, DOT). It is an indication that the helmet has been tested and approved for its ability to protect in real collision conditions.

ECE 22.06

New European-type safety specification certification "ECE 22.06", which ensures that the helmet is tested at 18 impact check points instead of 6 as was previously the case. It is now considered the most modern and comprehensive standard for helmet safety in Europe.
Pinlock (Anti-fog Film)
Not Supported

Pinlock (Anti-fog Film)

Not Supported

It is not compatible with the Pinlock system, so it cannot be installed. In this case, the helmet does not have the fittings for adding the Pinlock inner visor, which means there is no special protection against fogging or misting of the visor.

Extra Features

Removable / Washable Interior
Yes

Removable / Washable Interior

The helmet's interior lining can be removed and washed.
Sun Visor
Yes

Sun Visor

The helmet has an internal sun visor which is usually pulled down from the left side of the helmet for protection from the sun.

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

128,00 €
17,00 €   shipping cost