Skroutz.mt

Nillkin 2.5D 0.2mm Full Glue Tempered Glass (OnePlus 15)
Mobile Screen Protectors

Nillkin 2.5D 0.2mm Full Glue Tempered Glass (OnePlus 15)

The tempered glass by Nillkin is a hardened glass, specially designed to cover and protect your phone's screen from scratches and other damage. It does not affect the screen's functionality. In case of a phone drop, it does not guarantee that the screen will not break along with it, however, it is an additional protection. It has adhesive over its entire... See full description

Learn more about invoicing
Product report

Description

Description

The tempered glass by Nillkin is a hardened glass, specially designed to cover and protect your phone's screen from scratches and other damage. It does not affect the screen's functionality. In case of a phone drop, it does not guarantee that the screen will not break along with it, however, it is an additional protection. It has adhesive over its entire surface, unlike edge glue glasses that have adhesive only on their perimeter. This helps in better application and seamless touch screen functionality. It also does not allow dust to pass underneath, which can happen with edge glue when the perimeter adhesive wears off. It is 2.5D, which means its perimeter has rounded edges for a smoother touch feel when using the screen. Useful for modern smartphones with curved screens. It is compatible with OnePlus 15.

Manufacturer

Manufacturer Details

Warnings & Safety Information
See full description

Reviews (2)

Reviews

3.5
2
3.5
Review this product
  1. 1
  2. 4 stars
    0
  3. 3 stars
    0
  4. 1
  5. 1 star
    0
Review this product
  • samir_saad
    5
    samir_saad

    Verified purchase

    great! finger print sensor works similar to hydrogel film. it's much better than any 0.3 mm glass

    edit: after a few months of use I must say this is better than any cheap generic screen protector. in terms of the fingerprint sensor, I doubt you will find any screen protectors that do a better job than this one. it's very quick and works every single time. it is still a little slower then with hydrogel but the difference is barely noticeable. when using a 0.3mm glass the fingerprint sensor becomes almost completely useless.. so stick with this if you want functionality

    Translated from Greek ·
    Did you find this review helpful?
  • pluss
    2
    2 out of 2 members found this review helpful
    pluss

    Verified purchase

    Pros:

    1. Good quality.
    2. Easy installation without significant bubbles (only 2 small ones in the corners that won't go away no matter what, but they are not bothersome).

    Cons:

    1. I would like it to cover a slightly larger area on the screen. It is just a bit "shorter" and "narrower," resulting in a small gap at the edges. It's not a huge problem, but I think it's worth mentioning.
    2. The most important downside, however, is with the fingerprint function. Although I deleted the fingerprints and re-registered them after installing the glass, the fingerprint recognition success is not always 100% compared to before I put the glass on. Sometimes the phone fails to recognize it completely, so I unlock it with a PIN, while other times it needs a bit more pressure, especially if the finger is "dry" at that moment.

    As for scrolling, it works just fine and there is no problem at all (for extra safety, I have also enabled the glove mode in the phone settings just in case)

    Translated from Greek ·
    Did you find this review helpful?
  • samir_saad
    5
    samir_saad

    great! finger print sensor works similar to hydrogel film. it's much better than any 0.3 mm glass

    edit: after a few months of use I must say this is better than any cheap generic screen protector. in terms of the fingerprint sensor, I doubt you will find any screen protectors that do a better job than this one. it's very quick and works every single time. it is still a little slower then with hydrogel but the difference is barely noticeable. when using a 0.3mm glass the fingerprint sensor becomes almost completely useless.. so stick with this if you want functionality

    Translated from Greek ·
    0
  • pluss
    2
    pluss

    Pros:

    1. Good quality.
    2. Easy installation without significant bubbles (only 2 small ones in the corners that won't go away no matter what, but they are not bothersome).

    Cons:

    1. I would like it to cover a slightly larger area on the screen. It is just a bit "shorter" and "narrower," resulting in a small gap at the edges. It's not a huge problem, but I think it's worth mentioning.
    2. The most important downside, however, is with the fingerprint function. Although I deleted the fingerprints and re-registered them after installing the glass, the fingerprint recognition success is not always 100% compared to before I put the glass on. Sometimes the phone fails to recognize it completely, so I unlock it with a PIN, while other times it needs a bit more pressure, especially if the finger is "dry" at that moment.

    As for scrolling, it works just fine and there is no problem at all (for extra safety, I have also enabled the glove mode in the phone settings just in case)

    Translated from Greek ·
    2
  • See all

Description

The tempered glass by Nillkin is a hardened glass, specially designed to cover and protect your phone's screen from scratches and other damage. It does not affect the screen's functionality. In case of a phone drop, it does not guarantee that the screen will not break along with it, however, it is an additional protection. It has adhesive over its entire surface, unlike edge glue glasses that have adhesive only on their perimeter. This helps in better application and seamless touch screen functionality. It also does not allow dust to pass underneath, which can happen with edge glue when the perimeter adhesive wears off. It is 2.5D, which means its perimeter has rounded edges for a smoother touch feel when using the screen. Useful for modern smartphones with curved screens. It is compatible with OnePlus 15.

Manufacturer

Nillkin - Mobile Screen Protectors Nillkin

Manufacturer Details

Warnings & Safety Information

Reviews (2)

3.5
2
3.5
Review this product
  1. 1
  2. 4 stars
    0
  3. 3 stars
    0
  4. 1
  5. 1 star
    0
Review this product
  • samir_saad
    5
    samir_saad

    Verified purchase

    great! finger print sensor works similar to hydrogel film. it's much better than any 0.3 mm glass

    edit: after a few months of use I must say this is better than any cheap generic screen protector. in terms of the fingerprint sensor, I doubt you will find any screen protectors that do a better job than this one. it's very quick and works every single time. it is still a little slower then with hydrogel but the difference is barely noticeable. when using a 0.3mm glass the fingerprint sensor becomes almost completely useless.. so stick with this if you want functionality

    Translated from Greek ·
    Did you find this review helpful?
  • pluss
    2
    2 out of 2 members found this review helpful
    pluss

    Verified purchase

    Pros:

    1. Good quality.
    2. Easy installation without significant bubbles (only 2 small ones in the corners that won't go away no matter what, but they are not bothersome).

    Cons:

    1. I would like it to cover a slightly larger area on the screen. It is just a bit "shorter" and "narrower," resulting in a small gap at the edges. It's not a huge problem, but I think it's worth mentioning.
    2. The most important downside, however, is with the fingerprint function. Although I deleted the fingerprints and re-registered them after installing the glass, the fingerprint recognition success is not always 100% compared to before I put the glass on. Sometimes the phone fails to recognize it completely, so I unlock it with a PIN, while other times it needs a bit more pressure, especially if the finger is "dry" at that moment.

    As for scrolling, it works just fine and there is no problem at all (for extra safety, I have also enabled the glove mode in the phone settings just in case)

    Translated from Greek ·
    Did you find this review helpful?
  • samir_saad
    5
    samir_saad

    great! finger print sensor works similar to hydrogel film. it's much better than any 0.3 mm glass

    edit: after a few months of use I must say this is better than any cheap generic screen protector. in terms of the fingerprint sensor, I doubt you will find any screen protectors that do a better job than this one. it's very quick and works every single time. it is still a little slower then with hydrogel but the difference is barely noticeable. when using a 0.3mm glass the fingerprint sensor becomes almost completely useless.. so stick with this if you want functionality

    Translated from Greek ·
    0
  • pluss
    2
    pluss

    Pros:

    1. Good quality.
    2. Easy installation without significant bubbles (only 2 small ones in the corners that won't go away no matter what, but they are not bothersome).

    Cons:

    1. I would like it to cover a slightly larger area on the screen. It is just a bit "shorter" and "narrower," resulting in a small gap at the edges. It's not a huge problem, but I think it's worth mentioning.
    2. The most important downside, however, is with the fingerprint function. Although I deleted the fingerprints and re-registered them after installing the glass, the fingerprint recognition success is not always 100% compared to before I put the glass on. Sometimes the phone fails to recognize it completely, so I unlock it with a PIN, while other times it needs a bit more pressure, especially if the finger is "dry" at that moment.

    As for scrolling, it works just fine and there is no problem at all (for extra safety, I have also enabled the glove mode in the phone settings just in case)

    Translated from Greek ·
    2
  • See all
11,99 €
14,00 €   shipping cost