Category: Metal-wood paints

Application:

• The surface must be cleaned of dust, grease, oils, peeling old paint, rust, and any mold or moisture residues to ensure proper adhesion of the product.
• It is recommended to use the corresponding primer (Primer, Chassis coat, Velatura) for surface priming.
• Shake the product well and apply to the surface.
• The mechanical strength of the product is achieved after 20 - 30 days.

Application conditions:

• Avoid applying below 6°C and above 40°C.
• Do not apply when relative humidity is greater than 80%.

Tools for application:

• Brush
• Roller

During work, keep the tools “wet” inside the container. Strain the product well before storage and clean the tools immediately with White spirit. If the product dries, it can only be removed with strong solvents. Do not dispose of rinse liquids into the water table.

Coverage: 12-15m²/L on properly prepared surfaces.

Thinning: 1 - 5% White spirit.

Drying: 1 - 2 hours, depending on application conditions.