The TP-LINK ES205GP v1 switch expands a wired network with 5 Gigabit Ethernet ports, 4 of which support PoE+ to power connected devices. Total PoE power is up to 65 W, with up to 30 W per port, while data and power transmission can reach up to 250 m. The metal enclosure can be placed on a desk or mounted on a wall, and its fanless operation is silent.

Management is available through a web interface or Omada, with features such as VLAN, QoS, IGMP Snooping and PoE Auto Recovery. Using the Omada app and accessing the switch via the cloud requires an Omada Hardware Controller, Omada Cloud-Based Controller or Omada Software Controller.

• Type: Managed Layer 2 switch
• Ethernet ports: 5 RJ45 Gigabit Ethernet (10/100/1000 Mbps)
• SFP ports: 5
• PoE+ ports: 4, supporting 802.3af PoE and 802.3at PoE+
• PoE power: 65 W total, up to 30 W per port
• Transmission range: Up to 250 m for data and PoE power
• Management: Web interface, Omada app and centralized management via Omada Cloud-Based Controller, Omada Hardware Controller or Omada Software Controller
• Cloud access: With Omada Hardware Controller, Omada Cloud-Based Controller or Omada Software Controller
• Automatic initial configuration: Zero-Touch Provisioning with Omada Cloud-Based Controller
• Additional management features: DHCP Client, cable diagnostics, automatic device discovery, batch configuration and batch firmware upgrades
• VLAN: Tagged VLAN 802.1Q, Port-Based VLAN and MTU VLAN, up to 32 VLAN groups and 4K VID
• QoS: Port-based, 802.1p and DSCP, with 8 priority queues, WRR, bandwidth control and per-port rate limiting
• Layer 2 features: Static Link Aggregation, IGMP v1/v2/v3 Snooping, Fast Leave, Loop Prevention, Loopback Detection, Flow Control, Port Mirroring and Port Statistics
• Traffic control: Storm Control for broadcast, multicast and unknown-unicast traffic
• Additional features: Plug & Play, Auto-Negotiation, Auto MDI/MDI-X, Port Isolation, PoE Auto Recovery and Store-and-Forward
• Network standards: IEEE 802.1Q, IEEE 802.3x, IEEE 802.1p, IEEE 802.3at, IEEE 802.1ab
• Switching capacity: 10 Gbit/s
• Forwarding rate: 7.4 Mpps
• MAC address table: 8,000 entries
• Packet buffer: 4 MB
• Jumbo frames: Up to 15 KB
• Power supply: Included AC/DC adapter, with an output of 53.5 V DC / 1.31 A
• Surge protection: ±6 kV
• Enclosure: Black metal, with a security lock slot
• Installation: Desk, wall or rack mounting
• Fan: Fanless
• Indicators and controls: LED indicators and reset button
• Dimensions: 100 × 98 × 25 mm (width × depth × height)
• Operating temperature: 0 to 40 °C
• Storage temperature: -40 to 70 °C
• Operating relative humidity: 10–90%, non-condensing
• Storage relative humidity: 5–90%
• Compliance certifications: RoHS, CE, Federal Communications Commission (FCC)
• Package contents: Switch, power adapter, power cable, rubber feet and installation guide
• Packaging: Box
• Safety instructions: Do not open the enclosure or attempt user repairs; ensure adequate ventilation during operation
• Disposal: Take to an electronic equipment recycling center in accordance with local regulations; do not dispose of it in household waste