The Next Systems DKC600-VG4-SET-8 motor kit automates sliding garage doors weighing up to 600 kg. The motor is electromechanical, permanently lubricated with grease, and features a non-reversible mechanism and metal internal gears. It operates on a 230 VAC power supply and has an output of 280 W.

For a door approximately 5 m long at a temperature of 20 °C, it supports up to 25 opening and closing cycles per hour. The door moves at up to 13 m/min, while the winding’s thermal protection operates at 120 °C. The kit includes a control unit with a built-in receiver, eight rolling-code remote controls, safety photocells, and a warning light.

• Type: Motor kit for a sliding garage door
• Maximum door weight: 600 kg
• Maximum door length: 5 m
• Motor power: 280 W
• Supply voltage: 230 VAC
• Supply current: 1.3 A
• Motor speed: 1400 rpm
• Capacitor capacity: 12.5 μF
• Mechanism: Electromechanical, permanently lubricated with grease, and non-reversible
• Internal gears: Metal
• Maximum duty cycle: S3: 30% at 20 °C, S2: 10 min
• Opening and closing cycles per hour: Up to 25 for a 5 m door at 20 °C
• Maximum door speed: 13 m/min
• Winding thermal protection: 120 °C
• Gear type: Z17 / m4 (17 teeth / module 4)
• Limit switches: Mechanical, with microswitches and a spring
• Manual release: Key-operated
• Operating temperature: From -20 °C to +55 °C
• Protection rating: IP44
• Motor weight: 10 kg
• Motor dimensions: 237 × 213 × 270 mm, including the gear and excluding the mounting base
• Cover color: Black
• Control unit: 1, with a built-in receiver
• Remote controls: 8, 4-button, rolling-code
• Safety photocells: 1 set, wired, with transmitter and receiver
• Warning light: 1
• Rack: 4 m, metal, module 4, with spacers and screws
• Package contents: 1 motor, 2 manual release keys, 1 metal mounting base, 4 galvanized M8 anchor bolts, 8 galvanized Ø8 washers, 8 M8 nuts, 2 metal stop plates, 4 M6 screws for the plates, 4 Ø8 mm spring washers for the plates, 1 12.5 μF capacitor, and 1 user manual