Skroutz.mt

LS2 FF818 Storm III Komai Black/Blue Motorcycle Helmet Full Face ECE 22.06 1600gr with Pinlock and Sunvisor
Motorcycle Helmets

LS2 FF818 Storm III Komai Black/Blue Motorcycle Helmet Full Face ECE 22.06 1600gr with Pinlock and Sunvisor Code: 16818 06 25

The new LS2 Storm III is a high-performance touring-urban helmet, designed to offer comfort and safety both in the city and on the highway. Made from the innovative KPA material for maximum lightness...

The new LS2 Storm III is a high-performance touring-urban helmet, designed to offer comfort and safety both in the city and on the highway. Made from the innovative KPA material for maximum lightness and protection, the Storm III features ECE 22.06 certification, an internal sun visor, and includes the Pinlock 70 Max Vision anti-fog system. With top-level...

See full description See full description

  • Type

    Full Face

    The full-face helmet protects the entire head and jaw, making it more durable and safer than other helmets. 2. It is usually heavier and warmer, especially in the summer, compared to other helmets. 3. It is recommended for short distances within the city and for traveling.

  • Material

    Thermoplastic

    This is a plastic material mainly used in more affordable and entry-level helmets.

    Thermoplastic shells, such as Polycarbonate or ABS, offer basic protection through deformation upon impact, with greater weight and lower production cost compared to composite materials.

  • Certification

    Certification refers to the official inspection that confirms the helmet meets specific safety standards as defined by international organizations (e.g., ECE, DOT). It is an indication that the helmet has been tested and approved for its ability to protect in real collision conditions.

    ECE 22.06

    New European-type safety specification certification "ECE 22.06", which ensures that the helmet is tested at 18 impact check points instead of 6 as was previously the case. It is now considered the most modern and comprehensive standard for helmet safety in Europe.

  • Pinlock (Anti-fog Film)

    Included in the packaging

    The Pinlock system is included in the helmet packaging and can be installed on the inner side of the visor. The Pinlock is designed to prevent the fogging of the visor, ensuring clear visibility in cold or wet conditions.
  • Color Finish Matt
  • See all

Size

LS2 size guide
LS2 size guide

Size

LS2 size guide
International
Product report

Description

Description

The new LS2 Storm III is a high-performance touring-urban helmet, designed to offer comfort and safety both in the city and on the highway. Made from the innovative KPA material for maximum lightness and protection, the Storm III features ECE 22.06 certification, an internal sun visor, and includes the Pinlock 70 Max Vision anti-fog system. With top-level ventilation and hypoallergenic lining, it is the ideal choice for the rider seeking a complete package of safety and style.

Innovative KPA Construction Material

The outer shell of the LS2 Storm III is made from KPA (Kinetic Polymer Alloy), a blend of polymers that offers excellent impact resistance and enhanced lightness. It is available in 3 different shell sizes for a perfect fit for every rider, while its weight remains at the low level of 1600 (±50 g). Its design is aerodynamic, reducing air resistance and neck strain on long journeys.

Top Visibility with Max Vision Technology

The helmet visor is scratch resistant and offers protection from ultraviolet radiation (UV Resistant). The package includes the Pinlock 70 MaxVision system, which prevents the visor from fogging up even in the most challenging weather conditions. Additionally, the helmet features an internal foldable sun visor with an easy removal system, ensuring comfortable riding under strong sunlight.

Advanced Ventilation System and EPS

Thermal comfort is guaranteed thanks to the large upper air vent and the chin vent, which feature transparent parts for a unique aesthetic. The Channelled EPS inside allows for continuous airflow, while the exhaust ports at the back remove heat. The helmet also includes a Breath Deflector (nose guard) to reduce fogging and provide better management of the rider's breath.

Ultimate Safety and ECE 22.06 Certification

The Storm III meets the strictest safety standards ECE 22.06, offering advanced protection. It features an Emergency Release System for the cheek pads, allowing rescuers to safely remove the helmet in case of an accident. The fastening is done with a micrometric buckle made of steel, while the strap is reinforced for maximum durability and stability.

Premium Inner Lining and Comfort

The interior of the helmet is lined with an Extra Comfort Liner, which is fully removable, washable, and made from hypoallergenic and antibacterial breathable fabrics. The magnetic chin curtain reduces noise and airflow inside, while the laser-cut design of the pads ensures absolute precision and a perfect fit without pressure points on the rider's face.

Connectivity and Intercom Ready

For technology enthusiasts, the LS2 Storm III is Ready for LS2 INTERCOM, featuring special slots for easy installation of an intercom system. The visor is equipped with a Quick Release system for tool-free changes in seconds, as well as a locking mechanism (Visor Button Lock) to keep it stable at high speeds. It is a helmet that combines the practicality of the city with the demands of a long tour.

SkuDescription|Brand

Manufacturer Details

Warnings & Safety Information
See full description

Specifications

Specifications

Product Number
16818 06 25

Dimensions

Type
Full Face

Type

Full Face

The full-face helmet protects the entire head and jaw, making it more durable and safer than other helmets. 2. It is usually heavier and warmer, especially in the summer, compared to other helmets. 3. It is recommended for short distances within the city and for traveling.
Weight (+/-50 gr)
1600 gr

Weight (+/-50 gr): 1600

Most helmets weigh around 1500gr and some can reach up to 1800gr. Additionally, the material is also an important factor for the weight of the helmet, with carbon helmets being considered lighter.


A helmet weighing over 1450gr is not considered light and is not recommended for long rides.
Colour
Blue
Color Finish
Matt
Material
Thermoplastic

Material

Thermoplastic

This is a plastic material mainly used in more affordable and entry-level helmets.

Thermoplastic shells, such as Polycarbonate or ABS, offer basic protection through deformation upon impact, with greater weight and lower production cost compared to composite materials.
Certification
ECE 22.06

Certification

Certification refers to the official inspection that confirms the helmet meets specific safety standards as defined by international organizations (e.g., ECE, DOT). It is an indication that the helmet has been tested and approved for its ability to protect in real collision conditions.

ECE 22.06

New European-type safety specification certification "ECE 22.06", which ensures that the helmet is tested at 18 impact check points instead of 6 as was previously the case. It is now considered the most modern and comprehensive standard for helmet safety in Europe.
Pinlock (Anti-fog Film)
Included in the packaging

Pinlock (Anti-fog Film)

Included in the packaging

The Pinlock system is included in the helmet packaging and can be installed on the inner side of the visor. The Pinlock is designed to prevent the fogging of the visor, ensuring clear visibility in cold or wet conditions.

Extra Features

Removable / Washable Interior
Yes

Removable / Washable Interior

The helmet's interior lining can be removed and washed.
Intercom Support
Yes

Intercom Support

The helmet features space for the installation and support of intercom, such as for a speaker, cable, and microphone, so as not to create pressure on the head. 

It is usually very useful for long trips where riders want to have communication during the ride.
Sun Visor
Yes

Sun Visor

The helmet has an internal sun visor which is usually pulled down from the left side of the helmet for protection from the sun.
Chin Curtain
Yes

Chin Curtain

The helmet has a special fabric at the chin area. It helps to reduce airflow and noise.
Breath Guard
Yes

Breath Guard

It is an additional helmet ventilation accessory that prevents fogging on the visor caused by nose exhalation. It is quite useful during the winter months and in rainy conditions.

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

See all specifications

Reviews (9)

Reviews

5.0
9
5.0
Review this product
  1. 9
  2. 4 stars
    0
  3. 3 stars
    0
  4. 2 stars
    0
  5. 1 star
    0
Review this product
  • Application
  • Construction quality
  • Value for money

Description & Specifications

The new LS2 Storm III is a high-performance touring-urban helmet, designed to offer comfort and safety both in the city and on the highway. Made from the innovative KPA material for maximum lightness and protection, the Storm III features ECE 22.06 certification, an internal sun visor, and includes the Pinlock 70 Max Vision anti-fog system. With top-level ventilation and hypoallergenic lining, it is the ideal choice for the rider seeking a complete package of safety and style.

Innovative KPA Construction Material

The outer shell of the LS2 Storm III is made from KPA (Kinetic Polymer Alloy), a blend of polymers that offers excellent impact resistance and enhanced lightness. It is available in 3 different shell sizes for a perfect fit for every rider, while its weight remains at the low level of 1600 (±50 g). Its design is aerodynamic, reducing air resistance and neck strain on long journeys.

Top Visibility with Max Vision Technology

The helmet visor is scratch resistant and offers protection from ultraviolet radiation (UV Resistant). The package includes the Pinlock 70 MaxVision system, which prevents the visor from fogging up even in the most challenging weather conditions. Additionally, the helmet features an internal foldable sun visor with an easy removal system, ensuring comfortable riding under strong sunlight.

Advanced Ventilation System and EPS

Thermal comfort is guaranteed thanks to the large upper air vent and the chin vent, which feature transparent parts for a unique aesthetic. The Channelled EPS inside allows for continuous airflow, while the exhaust ports at the back remove heat. The helmet also includes a Breath Deflector (nose guard) to reduce fogging and provide better management of the rider's breath.

Ultimate Safety and ECE 22.06 Certification

The Storm III meets the strictest safety standards ECE 22.06, offering advanced protection. It features an Emergency Release System for the cheek pads, allowing rescuers to safely remove the helmet in case of an accident. The fastening is done with a micrometric buckle made of steel, while the strap is reinforced for maximum durability and stability.

Premium Inner Lining and Comfort

The interior of the helmet is lined with an Extra Comfort Liner, which is fully removable, washable, and made from hypoallergenic and antibacterial breathable fabrics. The magnetic chin curtain reduces noise and airflow inside, while the laser-cut design of the pads ensures absolute precision and a perfect fit without pressure points on the rider's face.

Connectivity and Intercom Ready

For technology enthusiasts, the LS2 Storm III is Ready for LS2 INTERCOM, featuring special slots for easy installation of an intercom system. The visor is equipped with a Quick Release system for tool-free changes in seconds, as well as a locking mechanism (Visor Button Lock) to keep it stable at high speeds. It is a helmet that combines the practicality of the city with the demands of a long tour.

SkuDescription|Brand

Manufacturer Details

Warnings & Safety Information
Product Number
16818 06 25

Dimensions

Type
Full Face

Type

Full Face

The full-face helmet protects the entire head and jaw, making it more durable and safer than other helmets. 2. It is usually heavier and warmer, especially in the summer, compared to other helmets. 3. It is recommended for short distances within the city and for traveling.
Weight (+/-50 gr)
1600 gr

Weight (+/-50 gr): 1600

Most helmets weigh around 1500gr and some can reach up to 1800gr. Additionally, the material is also an important factor for the weight of the helmet, with carbon helmets being considered lighter.


A helmet weighing over 1450gr is not considered light and is not recommended for long rides.
Colour
Blue
Color Finish
Matt
Material
Thermoplastic

Material

Thermoplastic

This is a plastic material mainly used in more affordable and entry-level helmets.

Thermoplastic shells, such as Polycarbonate or ABS, offer basic protection through deformation upon impact, with greater weight and lower production cost compared to composite materials.
Certification
ECE 22.06

Certification

Certification refers to the official inspection that confirms the helmet meets specific safety standards as defined by international organizations (e.g., ECE, DOT). It is an indication that the helmet has been tested and approved for its ability to protect in real collision conditions.

ECE 22.06

New European-type safety specification certification "ECE 22.06", which ensures that the helmet is tested at 18 impact check points instead of 6 as was previously the case. It is now considered the most modern and comprehensive standard for helmet safety in Europe.
Pinlock (Anti-fog Film)
Included in the packaging

Pinlock (Anti-fog Film)

Included in the packaging

The Pinlock system is included in the helmet packaging and can be installed on the inner side of the visor. The Pinlock is designed to prevent the fogging of the visor, ensuring clear visibility in cold or wet conditions.

Extra Features

Removable / Washable Interior
Yes

Removable / Washable Interior

The helmet's interior lining can be removed and washed.
Intercom Support
Yes

Intercom Support

The helmet features space for the installation and support of intercom, such as for a speaker, cable, and microphone, so as not to create pressure on the head. 

It is usually very useful for long trips where riders want to have communication during the ride.
Sun Visor
Yes

Sun Visor

The helmet has an internal sun visor which is usually pulled down from the left side of the helmet for protection from the sun.
Chin Curtain
Yes

Chin Curtain

The helmet has a special fabric at the chin area. It helps to reduce airflow and noise.
Breath Guard
Yes

Breath Guard

It is an additional helmet ventilation accessory that prevents fogging on the visor caused by nose exhalation. It is quite useful during the winter months and in rainy conditions.

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

Reviews (9)

5.0
9
5.0
Review this product
  1. 9
  2. 4 stars
    0
  3. 3 stars
    0
  4. 2 stars
    0
  5. 1 star
    0
Review this product
  • Application
  • Construction quality
  • Value for money
219,00 €
17,00 €   shipping cost