Skroutz.mt

Premier Trophy U9 BM Motorcycle Helmet Full Face ECE 22.06
Motorcycle Helmets

Premier Trophy U9 BM Motorcycle Helmet Full Face ECE 22.06 Code: 010116364

The outer shell is designed with DCA multi-axial structure, made from carbon fibers, Dyneema, and aramid, combined with epoxy resin, providing exceptional strength with low weight.

Effective shock...

The outer shell is designed with DCA multi-axial structure, made from carbon fibers, Dyneema, and aramid, combined with epoxy resin, providing exceptional strength with low weight.

Effective shock absorption: The inner shell features EPS of differentiated density, designed for better energy absorption in case of impact.

Lightweight, durable, and comfortable:...

See full description See full description

  • Type

    Full Face

    The full-face helmet protects the entire head and jaw, making it more durable and safer than other helmets. 2. It is usually heavier and warmer, especially in the summer, compared to other helmets. 3. It is recommended for short distances within the city and for traveling.

  • Material

    Carbon / Aramid / Fiberglass

    These are advanced composite materials used in high-quality and high-performance helmets.

    The combination of carbon fibers (Carbon), Aramid fibers (such as Kevlar), and fiberglass (Fiberglass) offers exceptional strength, low weight, and top energy absorption, making them ideal for demanding or racing use.

  • Certification

    Certification refers to the official inspection that confirms the helmet meets specific safety standards as defined by international organizations (e.g., ECE, DOT). It is an indication that the helmet has been tested and approved for its ability to protect in real collision conditions.

    ECE 22.06

    New European-type safety specification certification "ECE 22.06", which ensures that the helmet is tested at 18 impact check points instead of 6 as was previously the case. It is now considered the most modern and comprehensive standard for helmet safety in Europe.

  • Pinlock (Anti-fog Film)

    Not Supported

    It is not compatible with the Pinlock system, so it cannot be installed. In this case, the helmet does not have the fittings for adding the Pinlock inner visor, which means there is no special protection against fogging or misting of the visor.
  • See all

Size

Size

International
Review the product
Product report

Description

Description

The outer shell is designed with DCA multi-axial structure, made from carbon fibers, Dyneema, and aramid, combined with epoxy resin, providing exceptional strength with low weight.

Effective shock absorption: The inner shell features EPS of differentiated density, designed for better energy absorption in case of impact.

Lightweight, durable, and comfortable: The combination of the outer and inner shells creates a helmet that balances low weight, durability, and comfort, suitable for daily and long hours of use.

Functionality and attention to detail: The visor with anti-scratch treatment attaches to the shell via a mechanism that adjusts its movement smoothly. The internal linings are made from hypoallergenic fabric treated with Sanitized process, with a synthetic leather finish for a premium feel and hygiene.

Secure retention system: The strap features a double D-Ring buckle, ensuring a firm and reliable fit.

SkuDescription|Brand

Manufacturer Details

Warnings & Safety Information
See full description

Specifications

Specifications

Product Number
010116364

Dimensions

Type
Full Face

Type

Full Face

The full-face helmet protects the entire head and jaw, making it more durable and safer than other helmets. 2. It is usually heavier and warmer, especially in the summer, compared to other helmets. 3. It is recommended for short distances within the city and for traveling.
Colour
Grey
Material
Carbon / Aramid / Fiberglass

Material

Carbon / Aramid / Fiberglass

These are advanced composite materials used in high-quality and high-performance helmets.

The combination of carbon fibers (Carbon), Aramid fibers (such as Kevlar), and fiberglass (Fiberglass) offers exceptional strength, low weight, and top energy absorption, making them ideal for demanding or racing use.
Clasp
Double D Ring

Clasp

Double D Ring

The helmet is fastened with 2 metal rings that the strap passes through between them. 2. It is a mechanism that securely holds the helmet without coming undone. 3. It is not recommended for use with helmets that frequently come off as the fastening requires time. It does not easily break or malfunction compared to the microlock fastening.
Certification
ECE 22.06

Certification

Certification refers to the official inspection that confirms the helmet meets specific safety standards as defined by international organizations (e.g., ECE, DOT). It is an indication that the helmet has been tested and approved for its ability to protect in real collision conditions.

ECE 22.06

New European-type safety specification certification "ECE 22.06", which ensures that the helmet is tested at 18 impact check points instead of 6 as was previously the case. It is now considered the most modern and comprehensive standard for helmet safety in Europe.
Pinlock (Anti-fog Film)
Not Supported

Pinlock (Anti-fog Film)

Not Supported

It is not compatible with the Pinlock system, so it cannot be installed. In this case, the helmet does not have the fittings for adding the Pinlock inner visor, which means there is no special protection against fogging or misting of the visor.

Extra Features

Removable / Washable Interior
Yes

Removable / Washable Interior

The helmet's interior lining can be removed and washed.

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

See all specifications

Description & Specifications

The outer shell is designed with DCA multi-axial structure, made from carbon fibers, Dyneema, and aramid, combined with epoxy resin, providing exceptional strength with low weight.

Effective shock absorption: The inner shell features EPS of differentiated density, designed for better energy absorption in case of impact.

Lightweight, durable, and comfortable: The combination of the outer and inner shells creates a helmet that balances low weight, durability, and comfort, suitable for daily and long hours of use.

Functionality and attention to detail: The visor with anti-scratch treatment attaches to the shell via a mechanism that adjusts its movement smoothly. The internal linings are made from hypoallergenic fabric treated with Sanitized process, with a synthetic leather finish for a premium feel and hygiene.

Secure retention system: The strap features a double D-Ring buckle, ensuring a firm and reliable fit.

SkuDescription|Brand

Manufacturer Details

Warnings & Safety Information
Product Number
010116364

Dimensions

Type
Full Face

Type

Full Face

The full-face helmet protects the entire head and jaw, making it more durable and safer than other helmets. 2. It is usually heavier and warmer, especially in the summer, compared to other helmets. 3. It is recommended for short distances within the city and for traveling.
Colour
Grey
Material
Carbon / Aramid / Fiberglass

Material

Carbon / Aramid / Fiberglass

These are advanced composite materials used in high-quality and high-performance helmets.

The combination of carbon fibers (Carbon), Aramid fibers (such as Kevlar), and fiberglass (Fiberglass) offers exceptional strength, low weight, and top energy absorption, making them ideal for demanding or racing use.
Clasp
Double D Ring

Clasp

Double D Ring

The helmet is fastened with 2 metal rings that the strap passes through between them. 2. It is a mechanism that securely holds the helmet without coming undone. 3. It is not recommended for use with helmets that frequently come off as the fastening requires time. It does not easily break or malfunction compared to the microlock fastening.
Certification
ECE 22.06

Certification

Certification refers to the official inspection that confirms the helmet meets specific safety standards as defined by international organizations (e.g., ECE, DOT). It is an indication that the helmet has been tested and approved for its ability to protect in real collision conditions.

ECE 22.06

New European-type safety specification certification "ECE 22.06", which ensures that the helmet is tested at 18 impact check points instead of 6 as was previously the case. It is now considered the most modern and comprehensive standard for helmet safety in Europe.
Pinlock (Anti-fog Film)
Not Supported

Pinlock (Anti-fog Film)

Not Supported

It is not compatible with the Pinlock system, so it cannot be installed. In this case, the helmet does not have the fittings for adding the Pinlock inner visor, which means there is no special protection against fogging or misting of the visor.

Extra Features

Removable / Washable Interior
Yes

Removable / Washable Interior

The helmet's interior lining can be removed and washed.

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

303,99 €
17,00 €   shipping cost