Skroutz.mt

TIG AC DC 200 HF Pulsed MIG 200 A Welding Inverter T 40.20 PAH 1.741
Welding Machines

TIG AC DC 200 HF Pulsed MIG 200 A Welding Inverter T 40.20 PAH 1.741

Product Description: DC welding machine INVERTER MMA and TIG AC/DC. TIG welding is performed with a tungsten electrode and inert gas (Argon). Suitable for any material and thickness, including...

Product Description: DC welding machine INVERTER MMA and TIG AC/DC. TIG welding is performed with a tungsten electrode and inert gas (Argon). Suitable for any material and thickness, including aluminum and alloys. Features capability for creating pulsed AC/DC arc. Functions include: HOT START, ARC FORCE, ANTI-STICK. Power factor 40% (duty cycle %). Ready for...

See full description See full description

Top specs

  • Welding Current

    200

    Suitable for professional use on thick metals, such as steel or cast iron constructions.

  • Duty Cycle

    The Duty Cycle is the portion of a ten-minute period that a welding machine can operate continuously at maximum Amperes before it needs to stop and cool down.

    2.

    For example, a welding machine with a maximum Amperage of 200 A and a Duty Cycle of 30% can operate continuously at 200 A for 3 minutes before it needs to stop.
  • See all
The product is not available for shipping to the selected country.
Review the product
Product report

Description

Description

Product Description: DC welding machine INVERTER MMA and TIG AC/DC. TIG welding is performed with a tungsten electrode and inert gas (Argon). Suitable for any material and thickness, including aluminum and alloys. Features capability for creating pulsed AC/DC arc. Functions include: HOT START, ARC FORCE, ANTI-STICK. Power factor 40% (duty cycle %). Ready for welding with any electrodes: basic, rutile, stainless steel, cellulose, and cast iron. All windings and cables are 100% copper.

Standard Equipment:

  • Anatomic TIG torch SR 17/M16 3m x 16mm
  • 4 Copper nozzles (sizes 4, 5, 6 and 7)
  • 3 Electrode holders (1.0, 2.4 and 3.2 mm)
  • 1 Copper power cable 3m x 2.5mm
  • 1 Copper grounding cable (negative) 3m x 25mm
  • 1 Copper electrode cable 3m x 25mm
  • 1 Carrying strap

Technical specifications:

  • Current (X=100%) - 200 A
  • Power factor / Duty cycle - 60 %
  • Maximum electrode diameter - 6.0 mm (max tungsten 3.25 mm)
  • Weight - 27.0 Kg
  • Input voltage - 200-250 V
  • No-load voltage - 64 V
  • Dimensions - 21x44x50 cm
  • Compliance with European regulatory standards - 2004/108/EC 2002/95/CE and IEC 60974

Manufacturer: Stayer

Product category: Welding Tools

Manufacturer

OEM

Manufacturer Details

Warnings & Safety Information
See full description

Specifications

Specifications

Dimensions

Type
TIG, MIG, MMA

Type

TIG

Slow welding for detailed work on aluminum and stainless steel, mainly. Requires experience and connection to an external gas cylinder. Does not create "spatters".

MIG

The easiest welding method even for a beginner. 2. If the wire to be used does not have a special coating (flux), it should be connected to an external gas cylinder (e.g. argon, CO2).

MMA

Creates thick and strong bonds without the need for external gas supply, making it ideal for out-of-lab welding.
Welding Current (max)
200 A

Welding Current (max): 200


Suitable for professional use on thick metals, such as steel or cast iron constructions.
Operation Cycle (max Ampere)
40 %

Operation Cycle (max Ampere)

The Duty Cycle is the portion of a ten-minute period that a welding machine can operate continuously at maximum Amperes before it needs to stop and cool down.

2.

For example, a welding machine with a maximum Amperage of 200 A and a Duty Cycle of 30% can operate continuously at 200 A for 3 minutes before it needs to stop.
Maximum Electrode Diameter
3.2 mm

Maximum Electrode Diameter: 3.2


The maximum electrode thickness that the machine can support, depending on the maximum current it can provide.
Maximum Wire Diameter
16 mm

Maximum Wire Diameter: 16


The maximum wire thickness that the machine's wire feed can support, depending on the current intensity it can provide.
Weight
27000 gr

Additional Features

Inverter
Yes

Inverter


New technology welding. Very good in terms of performance, durability, and weight, but with a high cost of repair in case of damage. They have automation for better and safer work. If connected to a generator, it is recommended to choose one with 8kVA or more.
IGBT
No
VRD
No
with Voltage Stabilizer
No
for Generator with AVR
No

Features

Hot Start
Yes

Hot Start


Temporarily increases the current intensity at the moment of welding initiation.
Anti Stick
Yes

Anti Stick


Cuts off the current if the electrode sticks to the metal, to prevent it from burning.
Arc Force
Yes

Arc Force


Helps in the stability of the arc during welding.
2T Operation
No
4T Mode
No
Spot Function
No
Pulsed
Yes

Pulsed


Instead of remaining constant during welding, the current increases and decreases in pulses at specified time intervals.

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

See all specifications

Description & Specifications

Product Description: DC welding machine INVERTER MMA and TIG AC/DC. TIG welding is performed with a tungsten electrode and inert gas (Argon). Suitable for any material and thickness, including aluminum and alloys. Features capability for creating pulsed AC/DC arc. Functions include: HOT START, ARC FORCE, ANTI-STICK. Power factor 40% (duty cycle %). Ready for welding with any electrodes: basic, rutile, stainless steel, cellulose, and cast iron. All windings and cables are 100% copper.

Standard Equipment:

  • Anatomic TIG torch SR 17/M16 3m x 16mm
  • 4 Copper nozzles (sizes 4, 5, 6 and 7)
  • 3 Electrode holders (1.0, 2.4 and 3.2 mm)
  • 1 Copper power cable 3m x 2.5mm
  • 1 Copper grounding cable (negative) 3m x 25mm
  • 1 Copper electrode cable 3m x 25mm
  • 1 Carrying strap

Technical specifications:

  • Current (X=100%) - 200 A
  • Power factor / Duty cycle - 60 %
  • Maximum electrode diameter - 6.0 mm (max tungsten 3.25 mm)
  • Weight - 27.0 Kg
  • Input voltage - 200-250 V
  • No-load voltage - 64 V
  • Dimensions - 21x44x50 cm
  • Compliance with European regulatory standards - 2004/108/EC 2002/95/CE and IEC 60974

Manufacturer: Stayer

Product category: Welding Tools

Manufacturer

OEM

Manufacturer Details

Warnings & Safety Information

Dimensions

Type
TIG, MIG, MMA

Type

TIG

Slow welding for detailed work on aluminum and stainless steel, mainly. Requires experience and connection to an external gas cylinder. Does not create "spatters".

MIG

The easiest welding method even for a beginner. 2. If the wire to be used does not have a special coating (flux), it should be connected to an external gas cylinder (e.g. argon, CO2).

MMA

Creates thick and strong bonds without the need for external gas supply, making it ideal for out-of-lab welding.
Welding Current (max)
200 A

Welding Current (max): 200


Suitable for professional use on thick metals, such as steel or cast iron constructions.
Operation Cycle (max Ampere)
40 %

Operation Cycle (max Ampere)

The Duty Cycle is the portion of a ten-minute period that a welding machine can operate continuously at maximum Amperes before it needs to stop and cool down.

2.

For example, a welding machine with a maximum Amperage of 200 A and a Duty Cycle of 30% can operate continuously at 200 A for 3 minutes before it needs to stop.
Maximum Electrode Diameter
3.2 mm

Maximum Electrode Diameter: 3.2


The maximum electrode thickness that the machine can support, depending on the maximum current it can provide.
Maximum Wire Diameter
16 mm

Maximum Wire Diameter: 16


The maximum wire thickness that the machine's wire feed can support, depending on the current intensity it can provide.
Weight
27000 gr

Additional Features

Inverter
Yes

Inverter


New technology welding. Very good in terms of performance, durability, and weight, but with a high cost of repair in case of damage. They have automation for better and safer work. If connected to a generator, it is recommended to choose one with 8kVA or more.
IGBT
No
VRD
No
with Voltage Stabilizer
No
for Generator with AVR
No

Features

Hot Start
Yes

Hot Start


Temporarily increases the current intensity at the moment of welding initiation.
Anti Stick
Yes

Anti Stick


Cuts off the current if the electrode sticks to the metal, to prevent it from burning.
Arc Force
Yes

Arc Force


Helps in the stability of the arc during welding.
2T Operation
No
4T Mode
No
Spot Function
No
Pulsed
Yes

Pulsed


Instead of remaining constant during welding, the current increases and decreases in pulses at specified time intervals.

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.