Skroutz.mt

Milwaukee 4933499242 Grinder 230mm Battery 2x12Ah
Angle Grinders

Milwaukee 4933499242 Grinder 230mm Battery 2x12Ah

Key features:

  • Spindle Thread: M14
  • Maximum Disc Diameter: 230mm
See full description

  • Maximum Disc Diameter

    From 115mm to 150mm, it satisfactorily covers most amateur and professional tasks. The cutting depth ranges from 30mm to 40mm. A smaller disc diameter means that the wheel will be more flexible for simple tasks (e.g. electrical, plumbing, or DIY projects).

    From 180mm and above, it concerns industrial applications that require a larger cutting/sanding surface. The cutting depth is from 70mm and above.
  • Number of Batteries 2

  • Ah

    More amps means that the wheel will work for a longer time until the battery runs out. Usually, 5 to 6 amps (Ah) are enough for most tasks.
  • See all
1239 00 €
Delivery Wed, 08 Jul - Tue, 14 Jul
20,00 €   shipping cost
Sent from Greece
From NomikosTools
Greece
1 piece
See Power Tools on the page of NomikosTools
Review the product
Product report

Description

Description

At a glance

  • Provides performance equivalent to a 2200 W corded angle grinder.
  • ONE-KEY™ technology offers a free cloud-based tool tracking network and inventory management platform. ONE-KEY™ also features a remote lockout function.
  • RAPIDSTOP™ delivers the fastest disc brake in less than 3 seconds, for maximum user protection.
  • Non-lockable safety paddle switch with line-lock-out function to prevent automatic start-up.
  • Side anti-vibration handle for reduced vibrations.
  • FIXTEC™ nut for tool-free disc changes (only with FIXTEC™ kit – 4931480289).
  • Keyless guard for greater cutting capacity and quick adjustment without the use of a key.
  • Removable dust screen to prevent particle entry and extend motor life.
  • HIGH OUTPUT™ tool system takes M18 FUEL™ technologies to a new level, offering greater performance and longer run time. These tools are designed to make the most of HIGH OUTPUT™ and FORGE™ batteries.
  • Flexible battery system: compatible with all MILWAUKEE® M18™ batteries.

Features & Specifications

  • Anti-kickback protection: Yes
  • Brake: Yes
  • Disc diameter (mm): 230
  • Included kit: 2 × M18 FB12 batteries, M12-18 FC charger, carrying case (Kitbox)
  • Line lock out function: Yes
  • Maximum cutting depth (mm): 65
  • No-load speed (rpm): 6,600
  • Spindle size: M14
  • Standard equipment: Quick-release safety guard, cutting guard clip, AVS side handle, flange, flange nut, wrench, dust screen
  • Delivered in: Carrying case 

Manufacturer

Manufacturer Details

Warnings & Safety Information
See full description

Specifications

Specifications

Main Specifications

Power Source
Battery

Power Source

Battery

Ideal for outdoor work away from power outlets or in environments where connection to electricity is dangerous (e.g. boiler rooms).
Thread
M14

Thread

It is the part of the tool's shaft where the cutting or grinding disc is attached.
Maximum Disc Diameter
230 mm

Maximum Disc Diameter

From 115mm to 150mm, it satisfactorily covers most amateur and professional tasks. The cutting depth ranges from 30mm to 40mm. A smaller disc diameter means that the wheel will be more flexible for simple tasks (e.g. electrical, plumbing, or DIY projects).

From 180mm and above, it concerns industrial applications that require a larger cutting/sanding surface. The cutting depth is from 70mm and above.

Battery Specifications

Number of Batteries
2
Volt
18 V
Ah
12 Ah

Ah

More amps means that the wheel will work for a longer time until the battery runs out. Usually, 5 to 6 amps (Ah) are enough for most tasks.
Lithium
No

Features & Functions

Speed Adjustment
No

Speed Adjustment

Helps with tasks that require less speed and more detail such as sanding, polishing, DIY projects.
Brushless
No

Brushless

The advantage that brushless motors have over brushed ones is that they do not have friction since there are no carbon brushes. Without carbon brushes, the motors are more efficient and have a longer lifespan as there is no wear (the carbon brushes in brushed motors wear out with use). They produce less noise, maintain constant torque at all speeds, do not overheat, and require no maintenance.
Soft Start
No

Soft Start

Feature that controls the starting speed of the tool when it is activated, so that it does not start abruptly at maximum torque.
Keyless Guard Adjustment
Yes

Keyless Guard Adjustment


The user can adjust the guard position directly, without the need for specialized tools.
With Brake
Yes

With Brake


It features a rapid disc rotation stopping system. It slows down and stops the disc rotation within 1-2 seconds.
Keyless Disc Change
Yes

Keyless Disc Change


This mechanism uses a special nut or fastening system that can be tightened and loosened by hand, without tools. 

Accessories

Carrying Case
Hard Case
Handle Included
Yes

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

See all specifications

Description & Specifications

At a glance

  • Provides performance equivalent to a 2200 W corded angle grinder.
  • ONE-KEY™ technology offers a free cloud-based tool tracking network and inventory management platform. ONE-KEY™ also features a remote lockout function.
  • RAPIDSTOP™ delivers the fastest disc brake in less than 3 seconds, for maximum user protection.
  • Non-lockable safety paddle switch with line-lock-out function to prevent automatic start-up.
  • Side anti-vibration handle for reduced vibrations.
  • FIXTEC™ nut for tool-free disc changes (only with FIXTEC™ kit – 4931480289).
  • Keyless guard for greater cutting capacity and quick adjustment without the use of a key.
  • Removable dust screen to prevent particle entry and extend motor life.
  • HIGH OUTPUT™ tool system takes M18 FUEL™ technologies to a new level, offering greater performance and longer run time. These tools are designed to make the most of HIGH OUTPUT™ and FORGE™ batteries.
  • Flexible battery system: compatible with all MILWAUKEE® M18™ batteries.

Features & Specifications

  • Anti-kickback protection: Yes
  • Brake: Yes
  • Disc diameter (mm): 230
  • Included kit: 2 × M18 FB12 batteries, M12-18 FC charger, carrying case (Kitbox)
  • Line lock out function: Yes
  • Maximum cutting depth (mm): 65
  • No-load speed (rpm): 6,600
  • Spindle size: M14
  • Standard equipment: Quick-release safety guard, cutting guard clip, AVS side handle, flange, flange nut, wrench, dust screen
  • Delivered in: Carrying case 

Manufacturer

Manufacturer Details

Warnings & Safety Information

Main Specifications

Power Source
Battery

Power Source

Battery

Ideal for outdoor work away from power outlets or in environments where connection to electricity is dangerous (e.g. boiler rooms).
Thread
M14

Thread

It is the part of the tool's shaft where the cutting or grinding disc is attached.
Maximum Disc Diameter
230 mm

Maximum Disc Diameter

From 115mm to 150mm, it satisfactorily covers most amateur and professional tasks. The cutting depth ranges from 30mm to 40mm. A smaller disc diameter means that the wheel will be more flexible for simple tasks (e.g. electrical, plumbing, or DIY projects).

From 180mm and above, it concerns industrial applications that require a larger cutting/sanding surface. The cutting depth is from 70mm and above.

Battery Specifications

Number of Batteries
2
Volt
18 V
Ah
12 Ah

Ah

More amps means that the wheel will work for a longer time until the battery runs out. Usually, 5 to 6 amps (Ah) are enough for most tasks.
Lithium
No

Features & Functions

Speed Adjustment
No

Speed Adjustment

Helps with tasks that require less speed and more detail such as sanding, polishing, DIY projects.
Brushless
No

Brushless

The advantage that brushless motors have over brushed ones is that they do not have friction since there are no carbon brushes. Without carbon brushes, the motors are more efficient and have a longer lifespan as there is no wear (the carbon brushes in brushed motors wear out with use). They produce less noise, maintain constant torque at all speeds, do not overheat, and require no maintenance.
Soft Start
No

Soft Start

Feature that controls the starting speed of the tool when it is activated, so that it does not start abruptly at maximum torque.
Keyless Guard Adjustment
Yes

Keyless Guard Adjustment


The user can adjust the guard position directly, without the need for specialized tools.
With Brake
Yes

With Brake


It features a rapid disc rotation stopping system. It slows down and stops the disc rotation within 1-2 seconds.
Keyless Disc Change
Yes

Keyless Disc Change


This mechanism uses a special nut or fastening system that can be tightened and loosened by hand, without tools. 

Accessories

Carrying Case
Hard Case
Handle Included
Yes

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

1.239,00 €
20,00 €   shipping cost