Skroutz.mt

FIXATO Motorcycle Helmet Jet ECE 22.06
Motorcycle Helmets

FIXATO Motorcycle Helmet Jet ECE 22.06

The jet helmet offers a lightweight and comfortable experience, allowing you to easily put it on and take it off. With excellent visibility and pleasant ventilation while riding, it is important to...

The jet helmet offers a lightweight and comfortable experience, allowing you to easily put it on and take it off. With excellent visibility and pleasant ventilation while riding, it is important to note that it does not provide the same protection as full-face helmets, as it leaves a large area of the face exposed.

It is made of thermoplastic material, which...

See full description See full description

  • Type

    Jet

    The jet helmet is lightweight and comfortable as it is easy to put on and take off. It offers great visibility and is cool. However, it lacks in safety compared to a full-face helmet because it leaves a large area of the face uncovered.

  • Material

    Thermoplastic

    This is a plastic material mainly used in more affordable and entry-level helmets.

    Thermoplastic shells, such as Polycarbonate or ABS, offer basic protection through deformation upon impact, with greater weight and lower production cost compared to composite materials.

  • Certification

    Certification refers to the official inspection that confirms the helmet meets specific safety standards as defined by international organizations (e.g., ECE, DOT). It is an indication that the helmet has been tested and approved for its ability to protect in real collision conditions.

    ECE 22.06

    New European-type safety specification certification "ECE 22.06", which ensures that the helmet is tested at 18 impact check points instead of 6 as was previously the case. It is now considered the most modern and comprehensive standard for helmet safety in Europe.

  • Pinlock (Anti-fog Film)

    Not Supported

    It is not compatible with the Pinlock system, so it cannot be installed. In this case, the helmet does not have the fittings for adding the Pinlock inner visor, which means there is no special protection against fogging or misting of the visor.
  • See all
The product is not available for shipping to the selected country.
Review the product
Product report

Description

Description

The jet helmet offers a lightweight and comfortable experience, allowing you to easily put it on and take it off. With excellent visibility and pleasant ventilation while riding, it is important to note that it does not provide the same protection as full-face helmets, as it leaves a large area of the face exposed.

It is made of thermoplastic material, which provides basic protection through deformation upon impact. This material choice is ideal for more affordable helmets, offering a good balance of performance and cost.

Unfortunately, it does not support the Pinlock system, meaning there is no possibility to install an additional visor for protection against fogging or misting.

The Microlock locking mechanism makes it easy to put on and remove the helmet, although it is less durable compared to the Double D ring. However, the ECE 22.06 certification shows that the helmet has passed strict safety tests and meets modern protection standards.

  • Type: Jet, offers lightness and comfort.
  • Material: Thermoplastic, provides basic protection.
  • No compatibility with Pinlock.
  • Fastening: Microlock for easy use.
  • Certification: ECE 22.06, for high safety standards.
  • Does not support Bluetooth.

SkuDescription|Brand

Manufacturer Details

Warnings & Safety Information
See full description

Specifications

Specifications

Type
Jet

Type

Jet

The jet helmet is lightweight and comfortable as it is easy to put on and take off. It offers great visibility and is cool. However, it lacks in safety compared to a full-face helmet because it leaves a large area of the face uncovered.
Weight (+/-50 gr)
-

Weight (+/-50 gr)

Most helmets weigh around 1500gr and some can reach up to 1800gr. Additionally, the material is also an important factor for the weight of the helmet, with carbon helmets being considered lighter.
Colour
White
Material
Thermoplastic

Material

Thermoplastic

This is a plastic material mainly used in more affordable and entry-level helmets.

Thermoplastic shells, such as Polycarbonate or ABS, offer basic protection through deformation upon impact, with greater weight and lower production cost compared to composite materials.
Clasp
Microlock

Clasp

Microlock

The helmet has a retractable mechanism that fastens on the other side. 2. With this mechanism, we can easily put on and take off the helmet. 3. Compared to the Double D ring, it is less durable and more prone to breakage.
Certification
ECE 22.06

Certification

Certification refers to the official inspection that confirms the helmet meets specific safety standards as defined by international organizations (e.g., ECE, DOT). It is an indication that the helmet has been tested and approved for its ability to protect in real collision conditions.

ECE 22.06

New European-type safety specification certification "ECE 22.06", which ensures that the helmet is tested at 18 impact check points instead of 6 as was previously the case. It is now considered the most modern and comprehensive standard for helmet safety in Europe.
Pinlock (Anti-fog Film)
Not Supported

Pinlock (Anti-fog Film)

Not Supported

It is not compatible with the Pinlock system, so it cannot be installed. In this case, the helmet does not have the fittings for adding the Pinlock inner visor, which means there is no special protection against fogging or misting of the visor.

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

See all specifications

Description & Specifications

The jet helmet offers a lightweight and comfortable experience, allowing you to easily put it on and take it off. With excellent visibility and pleasant ventilation while riding, it is important to note that it does not provide the same protection as full-face helmets, as it leaves a large area of the face exposed.

It is made of thermoplastic material, which provides basic protection through deformation upon impact. This material choice is ideal for more affordable helmets, offering a good balance of performance and cost.

Unfortunately, it does not support the Pinlock system, meaning there is no possibility to install an additional visor for protection against fogging or misting.

The Microlock locking mechanism makes it easy to put on and remove the helmet, although it is less durable compared to the Double D ring. However, the ECE 22.06 certification shows that the helmet has passed strict safety tests and meets modern protection standards.

  • Type: Jet, offers lightness and comfort.
  • Material: Thermoplastic, provides basic protection.
  • No compatibility with Pinlock.
  • Fastening: Microlock for easy use.
  • Certification: ECE 22.06, for high safety standards.
  • Does not support Bluetooth.

SkuDescription|Brand

Manufacturer Details

Warnings & Safety Information
Type
Jet

Type

Jet

The jet helmet is lightweight and comfortable as it is easy to put on and take off. It offers great visibility and is cool. However, it lacks in safety compared to a full-face helmet because it leaves a large area of the face uncovered.
Weight (+/-50 gr)
-

Weight (+/-50 gr)

Most helmets weigh around 1500gr and some can reach up to 1800gr. Additionally, the material is also an important factor for the weight of the helmet, with carbon helmets being considered lighter.
Colour
White
Material
Thermoplastic

Material

Thermoplastic

This is a plastic material mainly used in more affordable and entry-level helmets.

Thermoplastic shells, such as Polycarbonate or ABS, offer basic protection through deformation upon impact, with greater weight and lower production cost compared to composite materials.
Clasp
Microlock

Clasp

Microlock

The helmet has a retractable mechanism that fastens on the other side. 2. With this mechanism, we can easily put on and take off the helmet. 3. Compared to the Double D ring, it is less durable and more prone to breakage.
Certification
ECE 22.06

Certification

Certification refers to the official inspection that confirms the helmet meets specific safety standards as defined by international organizations (e.g., ECE, DOT). It is an indication that the helmet has been tested and approved for its ability to protect in real collision conditions.

ECE 22.06

New European-type safety specification certification "ECE 22.06", which ensures that the helmet is tested at 18 impact check points instead of 6 as was previously the case. It is now considered the most modern and comprehensive standard for helmet safety in Europe.
Pinlock (Anti-fog Film)
Not Supported

Pinlock (Anti-fog Film)

Not Supported

It is not compatible with the Pinlock system, so it cannot be installed. In this case, the helmet does not have the fittings for adding the Pinlock inner visor, which means there is no special protection against fogging or misting of the visor.

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.