Skroutz.mt

FIXATO Motorcycle Helmet Full Face ECE 22.06
Motorcycle Helmets

FIXATO Motorcycle Helmet Full Face ECE 22.06

The full-face helmet is designed to provide protection to the entire head and jaw area, offering increased safety compared to other helmets. It is indeed heavier and warmer, especially in summer, but...

The full-face helmet is designed to provide protection to the entire head and jaw area, offering increased safety compared to other helmets. It is indeed heavier and warmer, especially in summer, but it is recommended for use both on short distances within the city and for trips.

Made of thermoplastic material, this helmet offers good protection through...

See full description See full description

  • Type

    Full Face

    The full-face helmet protects the entire head and jaw, making it more durable and safer than other helmets. 2. It is usually heavier and warmer, especially in the summer, compared to other helmets. 3. It is recommended for short distances within the city and for traveling.

  • Material

    Thermoplastic

    This is a plastic material mainly used in more affordable and entry-level helmets.

    Thermoplastic shells, such as Polycarbonate or ABS, offer basic protection through deformation upon impact, with greater weight and lower production cost compared to composite materials.

  • Certification

    Certification refers to the official inspection that confirms the helmet meets specific safety standards as defined by international organizations (e.g., ECE, DOT). It is an indication that the helmet has been tested and approved for its ability to protect in real collision conditions.

    ECE 22.06

    New European-type safety specification certification "ECE 22.06", which ensures that the helmet is tested at 18 impact check points instead of 6 as was previously the case. It is now considered the most modern and comprehensive standard for helmet safety in Europe.

  • Pinlock (Anti-fog Film)

    Not Supported

    It is not compatible with the Pinlock system, so it cannot be installed. In this case, the helmet does not have the fittings for adding the Pinlock inner visor, which means there is no special protection against fogging or misting of the visor.
  • See all
The product is not available for shipping to the selected country.
Review the product
Product report

Description

Description

The full-face helmet is designed to provide protection to the entire head and jaw area, offering increased safety compared to other helmets. It is indeed heavier and warmer, especially in summer, but it is recommended for use both on short distances within the city and for trips.

Made of thermoplastic material, this helmet offers good protection through deformation in the event of impact, while being economical compared to helmets made of composite materials. It is available in gray color, which gives it elegance and style.

Here are some of its important features:

  • The inner lining can be removed and washed for ease of maintenance.
  • The Microlock fastening mechanism facilitates putting on and removing the helmet.
  • It is certified according to the ECE 22.06 standard, ensuring it meets high safety standards.
  • It does not support the Pinlock system, meaning there is no option for visor fog protection.
  • It does not have Bluetooth capability.

SkuDescription|Brand

Manufacturer Details

Warnings & Safety Information
See full description

Specifications

Specifications

Dimensions

Type
Full Face

Type

Full Face

The full-face helmet protects the entire head and jaw, making it more durable and safer than other helmets. 2. It is usually heavier and warmer, especially in the summer, compared to other helmets. 3. It is recommended for short distances within the city and for traveling.
Weight (+/-50 gr)
-

Weight (+/-50 gr)

Most helmets weigh around 1500gr and some can reach up to 1800gr. Additionally, the material is also an important factor for the weight of the helmet, with carbon helmets being considered lighter.
Colour
Grey
Material
Thermoplastic

Material

Thermoplastic

This is a plastic material mainly used in more affordable and entry-level helmets.

Thermoplastic shells, such as Polycarbonate or ABS, offer basic protection through deformation upon impact, with greater weight and lower production cost compared to composite materials.
Clasp
Microlock

Clasp

Microlock

The helmet has a retractable mechanism that fastens on the other side. 2. With this mechanism, we can easily put on and take off the helmet. 3. Compared to the Double D ring, it is less durable and more prone to breakage.
Certification
ECE 22.06

Certification

Certification refers to the official inspection that confirms the helmet meets specific safety standards as defined by international organizations (e.g., ECE, DOT). It is an indication that the helmet has been tested and approved for its ability to protect in real collision conditions.

ECE 22.06

New European-type safety specification certification "ECE 22.06", which ensures that the helmet is tested at 18 impact check points instead of 6 as was previously the case. It is now considered the most modern and comprehensive standard for helmet safety in Europe.
Pinlock (Anti-fog Film)
Not Supported

Pinlock (Anti-fog Film)

Not Supported

It is not compatible with the Pinlock system, so it cannot be installed. In this case, the helmet does not have the fittings for adding the Pinlock inner visor, which means there is no special protection against fogging or misting of the visor.

Extra Features

Removable / Washable Interior
Yes

Removable / Washable Interior

The helmet's interior lining can be removed and washed.

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

See all specifications

Description & Specifications

The full-face helmet is designed to provide protection to the entire head and jaw area, offering increased safety compared to other helmets. It is indeed heavier and warmer, especially in summer, but it is recommended for use both on short distances within the city and for trips.

Made of thermoplastic material, this helmet offers good protection through deformation in the event of impact, while being economical compared to helmets made of composite materials. It is available in gray color, which gives it elegance and style.

Here are some of its important features:

  • The inner lining can be removed and washed for ease of maintenance.
  • The Microlock fastening mechanism facilitates putting on and removing the helmet.
  • It is certified according to the ECE 22.06 standard, ensuring it meets high safety standards.
  • It does not support the Pinlock system, meaning there is no option for visor fog protection.
  • It does not have Bluetooth capability.

SkuDescription|Brand

Manufacturer Details

Warnings & Safety Information

Dimensions

Type
Full Face

Type

Full Face

The full-face helmet protects the entire head and jaw, making it more durable and safer than other helmets. 2. It is usually heavier and warmer, especially in the summer, compared to other helmets. 3. It is recommended for short distances within the city and for traveling.
Weight (+/-50 gr)
-

Weight (+/-50 gr)

Most helmets weigh around 1500gr and some can reach up to 1800gr. Additionally, the material is also an important factor for the weight of the helmet, with carbon helmets being considered lighter.
Colour
Grey
Material
Thermoplastic

Material

Thermoplastic

This is a plastic material mainly used in more affordable and entry-level helmets.

Thermoplastic shells, such as Polycarbonate or ABS, offer basic protection through deformation upon impact, with greater weight and lower production cost compared to composite materials.
Clasp
Microlock

Clasp

Microlock

The helmet has a retractable mechanism that fastens on the other side. 2. With this mechanism, we can easily put on and take off the helmet. 3. Compared to the Double D ring, it is less durable and more prone to breakage.
Certification
ECE 22.06

Certification

Certification refers to the official inspection that confirms the helmet meets specific safety standards as defined by international organizations (e.g., ECE, DOT). It is an indication that the helmet has been tested and approved for its ability to protect in real collision conditions.

ECE 22.06

New European-type safety specification certification "ECE 22.06", which ensures that the helmet is tested at 18 impact check points instead of 6 as was previously the case. It is now considered the most modern and comprehensive standard for helmet safety in Europe.
Pinlock (Anti-fog Film)
Not Supported

Pinlock (Anti-fog Film)

Not Supported

It is not compatible with the Pinlock system, so it cannot be installed. In this case, the helmet does not have the fittings for adding the Pinlock inner visor, which means there is no special protection against fogging or misting of the visor.

Extra Features

Removable / Washable Interior
Yes

Removable / Washable Interior

The helmet's interior lining can be removed and washed.

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.