One-component sealant for windshield bonding without increased safety warranty. It is used for securing front, rear, and side windows in cars, trucks, rail transport, and special-purpose vehicles. It is also suitable for securing car spoilers.

Meets the specifications of Loctite TEROSON PU 8597 HMLC. The minimum readiness time is 1 hour after application, according to FMVSS (USA) and 4 hours according to the strict European impact test standard.

• Suitable for application on the windshield opening of any material, including aluminum.
• No additional glass securing is required due to high initial hardness and strong adhesive properties.
• Very good relaxation resistance.
• High polymerization speed.
• High shear strength and high shear modulus.
• Good elasticity after long-term use.
• Very low electrical conductivity.
• Good adhesion to residues of the old adhesive joint.
• High resistance to ultraviolet radiation.
• Excellent adhesion to glass, ceramic-coated glass, and painted surfaces.
• High European safety standard.

Thoroughly clean the bonding surfaces from old adhesive, paints, and other coatings, rust, dirt, grease, and oil deposits. Degrease the surface of the windshield opening at the landing point. Ensure that there are no damages or defects on the glass surface. Apply a thin layer of adhesive to the bonding points on the glass. It is necessary to start the application from the bottom edge of the glass with a uniform layer without breaks and gaps between the layers.