Skroutz.mt

Sincosald Welding Machine Inverter MAG / MIG / MMA / TIG
Welding Machines

Sincosald Welding Machine Inverter MAG / MIG / MMA / TIG

Key features:

  • Frequency: 50 / 60 Hz
  • Input voltage: 110V / 230V ±10%
  • Power factor: 0.99
  • Efficiency: up to 85%
  • Weight: 5 kg
See full description

  • Power Supply Voltage

    110

    It is the supply voltage that the machine requires from the electrical grid.
  • See all
This product is temporarily unavailable at Skroutz Last updated: 15 days ago
Review the product
Product report

Description

Description

Capabilities

Inverter MIG / TIG welding machine from the manufacturer Sincosald, where inverter technology enhances the machine’s performance and durability while reducing its weight. The MIG method requires the wire to have a special coating (flux), otherwise it needs to be connected to an external gas cylinder (e.g. argon, CO2). The TIG method is suitable for slow welding on aluminum and stainless steel that requires detailed work and does not create splatter. The MAG method creates welds with gas supply, making it ideal for indoor welding. Its weight reaches 5kg.

Functions

  • 4.3-inch LCD screen 
  • Innovative welding mode selection, impressive numeric display, extremely intuitive parameter adjustment 
  • Manual operation MIG / MAG / SYN / Pulse / DP MMA mode (coated electrode) 
  • Hot start (improves arc ignition) 
  • Adjustable TIG AC / DC arc force and DC HF Lift arc trigger 2T / 4T operation 
  • Adjustable up and down slope / Postflow 
  • PLASMA CUTTING function
  • Dual voltage supply, operates at 110 V and 230 V
  • 5 kg wire spool 
  • Waveform control, for greater arc stability, even at low current levels 
  • Equipped with temperature sensors for safe protection of the INVERTER 
  • Reverse polarity 
  • Can be connected with UP / DOWN torch Can be connected with SPOOL GUN torch

Manufacturer

Manufacturer Details

Warnings & Safety Information
See full description

Specifications

Specifications

Dimensions

Type
MAG, MIG, MMA, TIG

Type

MIG

The easiest welding method even for a beginner. 2. If the wire to be used does not have a special coating (flux), it should be connected to an external gas cylinder (e.g. argon, CO2).

MMA

Creates thick and strong bonds without the need for external gas supply, making it ideal for out-of-lab welding.

TIG

Slow welding for detailed work on aluminum and stainless steel, mainly. Requires experience and connection to an external gas cylinder. Does not create "spatters".
Supply Voltage
110 V

Supply Voltage: 110


It is the supply voltage that the machine requires from the electrical grid.
Maximum Electrode Diameter
4.3 mm

Maximum Electrode Diameter: 4.3


The maximum electrode thickness that the machine can support, depending on the maximum current it can provide.
Maximum Wire Diameter
4.3 mm

Maximum Wire Diameter: 4.3


The maximum wire thickness that the machine's wire feed can support, depending on the current intensity it can provide.
Weight
5000 gr

Additional Features

Inverter
Yes

Inverter


New technology welding. Very good in terms of performance, durability, and weight, but with a high cost of repair in case of damage. They have automation for better and safer work. If connected to a generator, it is recommended to choose one with 8kVA or more.
IGBT
No
VRD
No
with Voltage Stabilizer
No
for Generator with AVR
No

Features

Hot Start
No
Anti Stick
No
Arc Force
No
2T Operation
No
4T Mode
Yes

4T Mode


Press the button once to start welding and release it. You do not need to keep the button pressed.
Spot Function
No
Pulsed
Yes

Pulsed


Instead of remaining constant during welding, the current increases and decreases in pulses at specified time intervals.

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

See all specifications

Description & Specifications

Capabilities

Inverter MIG / TIG welding machine from the manufacturer Sincosald, where inverter technology enhances the machine’s performance and durability while reducing its weight. The MIG method requires the wire to have a special coating (flux), otherwise it needs to be connected to an external gas cylinder (e.g. argon, CO2). The TIG method is suitable for slow welding on aluminum and stainless steel that requires detailed work and does not create splatter. The MAG method creates welds with gas supply, making it ideal for indoor welding. Its weight reaches 5kg.

Functions

  • 4.3-inch LCD screen 
  • Innovative welding mode selection, impressive numeric display, extremely intuitive parameter adjustment 
  • Manual operation MIG / MAG / SYN / Pulse / DP MMA mode (coated electrode) 
  • Hot start (improves arc ignition) 
  • Adjustable TIG AC / DC arc force and DC HF Lift arc trigger 2T / 4T operation 
  • Adjustable up and down slope / Postflow 
  • PLASMA CUTTING function
  • Dual voltage supply, operates at 110 V and 230 V
  • 5 kg wire spool 
  • Waveform control, for greater arc stability, even at low current levels 
  • Equipped with temperature sensors for safe protection of the INVERTER 
  • Reverse polarity 
  • Can be connected with UP / DOWN torch Can be connected with SPOOL GUN torch

Manufacturer

Manufacturer Details

Warnings & Safety Information

Dimensions

Type
MAG, MIG, MMA, TIG

Type

MIG

The easiest welding method even for a beginner. 2. If the wire to be used does not have a special coating (flux), it should be connected to an external gas cylinder (e.g. argon, CO2).

MMA

Creates thick and strong bonds without the need for external gas supply, making it ideal for out-of-lab welding.

TIG

Slow welding for detailed work on aluminum and stainless steel, mainly. Requires experience and connection to an external gas cylinder. Does not create "spatters".
Supply Voltage
110 V

Supply Voltage: 110


It is the supply voltage that the machine requires from the electrical grid.
Maximum Electrode Diameter
4.3 mm

Maximum Electrode Diameter: 4.3


The maximum electrode thickness that the machine can support, depending on the maximum current it can provide.
Maximum Wire Diameter
4.3 mm

Maximum Wire Diameter: 4.3


The maximum wire thickness that the machine's wire feed can support, depending on the current intensity it can provide.
Weight
5000 gr

Additional Features

Inverter
Yes

Inverter


New technology welding. Very good in terms of performance, durability, and weight, but with a high cost of repair in case of damage. They have automation for better and safer work. If connected to a generator, it is recommended to choose one with 8kVA or more.
IGBT
No
VRD
No
with Voltage Stabilizer
No
for Generator with AVR
No

Features

Hot Start
No
Anti Stick
No
Arc Force
No
2T Operation
No
4T Mode
Yes

4T Mode


Press the button once to start welding and release it. You do not need to keep the button pressed.
Spot Function
No
Pulsed
Yes

Pulsed


Instead of remaining constant during welding, the current increases and decreases in pulses at specified time intervals.

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.