Skroutz.mt

Joie I-Snug 2 Baby Car Seat i-Size with Isofix Brown 0-13 kg
Baby Car Seats

Joie I-Snug 2 Baby Car Seat i-Size with Isofix Brown 0-13 kg Code: C1817CACSW000

The Joie i-Snug 2 car seat is certified according to the R129 standard and has been tested by ADAC. It is used exclusively in the rear position from 40 to 75 cm (0-12 months, 13 kg).

  • R129...

The Joie i-Snug 2 car seat is certified according to the R129 standard and has been tested by ADAC. It is used exclusively in the rear position from 40 to 75 cm (0-12 months, 13 kg).

  • R129 Certification: New EU regulation for car seat safety, classifying seats based on the child's height.
  • Increased Safety: The seat provides better protection for the baby's...
See full description See full description

Top specs

  • Orientation

    This concerns the direction that the seat is facing. It can be either forward or backward. Additionally, some seats have the ability to rotate and have both directions.

    Rear

    The baby's first car seat should be strictly rear-facing. 2. Until the age of 2 or until the child exceeds the maximum weight allowed for the seat, the baby should face backwards, as the seat serves the correct posture that protects and supports the head, neck, and spine in the event of a collision.

  • Suitable for Weight

    0-13 kg

    From 0 to 15 months, with rear-facing orientation and the child lying at a 30-45 degree angle.
  • Suitable for Height 40-75 cm
  • Seat Weight 3.35 kg
  • See all
The product is not available for shipping to the selected country.
Review the product
Product report

Description

Description

The Joie i-Snug 2 car seat is certified according to the R129 standard and has been tested by ADAC. It is used exclusively in the rear position from 40 to 75 cm (0-12 months, 13 kg).

  • R129 Certification: New EU regulation for car seat safety, classifying seats based on the child's height.
  • Increased Safety: The seat provides better protection for the baby's head, neck, and spine due to additional tests for frontal and side collisions.
  • Lightweight Product: The Joie i-Snug 2 is one of the lightest products in the i-Size range, weighing only 3.25 kg.
  • Tri-Protect Headrest: Features 3 layers of protection that absorb impact forces during a collision.
  • Encore System: Compatible with an ISOFIX base that allows use at various stages of the child's development.

The Joie i-Snug 2 has excellent build quality and offers comfort with an additional newborn cushion, as well as compatibility with Joie stroller models and others via the Maxi-Cosi® adapter.

This seat must be used only in the rear position, from birth up to 75 cm (approximately 12 months).

Manufacturer

Manufacturer Details

Warnings & Safety Information
See full description

Specifications

Specifications

Product Number
C1817CACSW000

General Information

Type
Egg

Type

Egg

Designed exclusively for infants, with rear-facing only installation for head and back safety. Essential for the maternity hospital and use during the first months.
Facing
Rear

Facing

This concerns the direction that the seat is facing. It can be either forward or backward. Additionally, some seats have the ability to rotate and have both directions.

Rear

The baby's first car seat should be strictly rear-facing. 2. Until the age of 2 or until the child exceeds the maximum weight allowed for the seat, the baby should face backwards, as the seat serves the correct posture that protects and supports the head, neck, and spine in the event of a collision.
Number of Belt Anchor Points
-

Number of Belt Anchor Points

Shows how many points the car seat belt fastens.
Seat Weight
3.35 kg
Colour
Brown

Age group

Weight Group
0-13 kg

Weight Group

0-13 kg

From 0 to 15 months, with rear-facing orientation and the child lying at a 30-45 degree angle.
Maximum Child Age
1 years
Child Height
40-75 cm

Details

Recline
Yes

Recline

The seat is properly adjusted to have a tilt. The recline helps prevent the child's head from leaning forward when sleeping.

Some models allow for adjustment of the recline when the child is already seated, while others require adjustment before placing the child in the seat.

It is not recommended for newborns as babies should not be lifted more than 30 degrees due to the potential risk of musculoskeletal problems.
Swivel
No

Swivel

The seat has the ability to make a full rotation (360 degrees) for a change of orientation and immediate access to the child.

2. The rotation capability offers comfort and flexibility to the parent as they have easy access to any orientation the seat has.
Top Tether
No

Top Tether

It is an additional restraint strap located on the top or back of the seat, which holds it in place and reduces forward movement of the seat during a frontal collision, providing additional safety in case of an accident.
With Removable Covers
Yes
with Base
No

Technical Specifications

ADAC Test
Good

ADAC Test

ADAC is a company that conducts crash tests and evaluates car seats for safety, ergonomics, functionality, and the presence of harmful substances.

Good
The rating is based on the following Scale: (++) Very Good, (+) Good, (Ο) Satisfactory, (Θ) Enough, (-) Poor. The higher the rating, the safer the seat.
Swedish Plus Test
No

Swedish Plus Test

Considered the strictest crash test worldwide. It focuses on measuring the pressure exerted on the neck, imposing limits that only rear-facing seats can meet.
i-Size
Yes

i-Size

These are new generation seats that offer additional safety in case of side collision.


i-Size seats are designed according to the height, not the weight of the child, allowing them to travel rear-facing for a longer period of time.


i-Size seats do not replace weight-based car seats but offer an additional option. They are recommended for both newborns and older children.
Side Collision Protection
Yes

Side Collision Protection

An integrated system on the side of the seat that reduces the impact force of a side collision, protecting the child from serious injury.
ADAC Rating
1.7

Installation

ISOfix
Yes

ISOfix

It is a system for safely installing a child seat. To apply it, it is necessary for the rear seats of the car to have the corresponding metal receptacles, but all modern cars have them.

2. The isofix system is easier to install compared to seats that do not have it. The seat clicks into the car's receptacles and thus reduces the movement of the seat towards the front in the event of a collision.

3. Most seats that apply to all ages have the isofix system.
Seatbelt
Yes

Seatbelt

The car seat can be installed in the car using the vehicle's seat belt.

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

See all specifications

Description & Specifications

The Joie i-Snug 2 car seat is certified according to the R129 standard and has been tested by ADAC. It is used exclusively in the rear position from 40 to 75 cm (0-12 months, 13 kg).

  • R129 Certification: New EU regulation for car seat safety, classifying seats based on the child's height.
  • Increased Safety: The seat provides better protection for the baby's head, neck, and spine due to additional tests for frontal and side collisions.
  • Lightweight Product: The Joie i-Snug 2 is one of the lightest products in the i-Size range, weighing only 3.25 kg.
  • Tri-Protect Headrest: Features 3 layers of protection that absorb impact forces during a collision.
  • Encore System: Compatible with an ISOFIX base that allows use at various stages of the child's development.

The Joie i-Snug 2 has excellent build quality and offers comfort with an additional newborn cushion, as well as compatibility with Joie stroller models and others via the Maxi-Cosi® adapter.

This seat must be used only in the rear position, from birth up to 75 cm (approximately 12 months).

Manufacturer

Manufacturer Details

Warnings & Safety Information
Product Number
C1817CACSW000

General Information

Type
Egg

Type

Egg

Designed exclusively for infants, with rear-facing only installation for head and back safety. Essential for the maternity hospital and use during the first months.
Facing
Rear

Facing

This concerns the direction that the seat is facing. It can be either forward or backward. Additionally, some seats have the ability to rotate and have both directions.

Rear

The baby's first car seat should be strictly rear-facing. 2. Until the age of 2 or until the child exceeds the maximum weight allowed for the seat, the baby should face backwards, as the seat serves the correct posture that protects and supports the head, neck, and spine in the event of a collision.
Number of Belt Anchor Points
-

Number of Belt Anchor Points

Shows how many points the car seat belt fastens.
Seat Weight
3.35 kg
Colour
Brown

Age group

Weight Group
0-13 kg

Weight Group

0-13 kg

From 0 to 15 months, with rear-facing orientation and the child lying at a 30-45 degree angle.
Maximum Child Age
1 years
Child Height
40-75 cm

Details

Recline
Yes

Recline

The seat is properly adjusted to have a tilt. The recline helps prevent the child's head from leaning forward when sleeping.

Some models allow for adjustment of the recline when the child is already seated, while others require adjustment before placing the child in the seat.

It is not recommended for newborns as babies should not be lifted more than 30 degrees due to the potential risk of musculoskeletal problems.
Swivel
No

Swivel

The seat has the ability to make a full rotation (360 degrees) for a change of orientation and immediate access to the child.

2. The rotation capability offers comfort and flexibility to the parent as they have easy access to any orientation the seat has.
Top Tether
No

Top Tether

It is an additional restraint strap located on the top or back of the seat, which holds it in place and reduces forward movement of the seat during a frontal collision, providing additional safety in case of an accident.
With Removable Covers
Yes
with Base
No

Technical Specifications

ADAC Test
Good

ADAC Test

ADAC is a company that conducts crash tests and evaluates car seats for safety, ergonomics, functionality, and the presence of harmful substances.

Good
The rating is based on the following Scale: (++) Very Good, (+) Good, (Ο) Satisfactory, (Θ) Enough, (-) Poor. The higher the rating, the safer the seat.
Swedish Plus Test
No

Swedish Plus Test

Considered the strictest crash test worldwide. It focuses on measuring the pressure exerted on the neck, imposing limits that only rear-facing seats can meet.
i-Size
Yes

i-Size

These are new generation seats that offer additional safety in case of side collision.


i-Size seats are designed according to the height, not the weight of the child, allowing them to travel rear-facing for a longer period of time.


i-Size seats do not replace weight-based car seats but offer an additional option. They are recommended for both newborns and older children.
Side Collision Protection
Yes

Side Collision Protection

An integrated system on the side of the seat that reduces the impact force of a side collision, protecting the child from serious injury.
ADAC Rating
1.7

Installation

ISOfix
Yes

ISOfix

It is a system for safely installing a child seat. To apply it, it is necessary for the rear seats of the car to have the corresponding metal receptacles, but all modern cars have them.

2. The isofix system is easier to install compared to seats that do not have it. The seat clicks into the car's receptacles and thus reduces the movement of the seat towards the front in the event of a collision.

3. Most seats that apply to all ages have the isofix system.
Seatbelt
Yes

Seatbelt

The car seat can be installed in the car using the vehicle's seat belt.

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.