Skroutz.mt

Kemot Extension Reel Cord 3 x 2.5mm²/40m
Extension Cords

Kemot Extension Reel Cord 3 x 2.5mm²/40m Code: E-PSM25T40

Electric extension reel with metal drum

Technical specifications:

  • Cable: 3 x 2.5 mm
  • Cable length: 40 m
  • Sockets: 4
  • Maximum voltage: 250 V (AC)
  • Maximum power:
    • 2700W (with fully unwound cable)
    • 1000W...

Electric extension reel with metal drum

Technical specifications:

  • Cable: 3 x 2.5 mm
  • Cable length: 40 m
  • Sockets: 4
  • Maximum voltage: 250 V (AC)
  • Maximum power:
    • 2700W (with fully unwound cable)
    • 1000W (with wound cable)

Important usage instructions:

  • Make electrical connections according to regulations and legislation to prevent workplace accidents. Ensure...
See full description See full description
  • Length 40 m

  • Cable Cross-Section

    It is the "thickness" of the cable. The thicker it is, the more current it can handle without its temperature rising.

    3 x 2.5

    Intended for heavier loads, such as general-purpose sockets, power tools, ovens, or refrigerators. It can safely support single-phase power supply lines.

  • Maximum Load

    The maximum electrical load that the extension reel can support without overheating. This applies only when the extension reel is fully unwound. When it is wound, the allowable power is lower due to overheating.
  • See all
The product is not available for shipping to the selected country.
Review the product
Product report

Description

Description

Electric extension reel with metal drum

Technical specifications:

  • Cable: 3 x 2.5 mm
  • Cable length: 40 m
  • Sockets: 4
  • Maximum voltage: 250 V (AC)
  • Maximum power:
    • 2700W (with fully unwound cable)
    • 1000W (with wound cable)

Important usage instructions:

  • Make electrical connections according to regulations and legislation to prevent workplace accidents. Ensure that the socket is properly grounded.
  • Do not use the extension reel in areas with high humidity or rain.
  • Check the cable or its insulation (PVC sheath) to ensure it is not damaged or bent (heavy objects, between doors, etc.).
  • When the extension reel is used frequently or for long periods during welding processes or with high-power electrical equipment, it is recommended to unwind the cable from the drum to avoid rapid heating (coil effect).

Warning! Exceeding the specified maximum power may cause the cable to melt and lead to accidents.

Manufacturer

Manufacturer Details

Warnings & Safety Information
See full description

Specifications

Specifications

Product Number
E-PSM25T40

Specifications

Type
Reel
Type
Open Type

Type

Open Type

The reel is open, you can see the cable wound.
Automatic Cable Rewind
No

Automatic Cable Rewind

The cable automatically retracts back into the reel with a "click", just like with a vacuum cleaner.
Industrial Type
No

Industrial Type

Durable socket for heavy-duty use (e.g. construction sites, workshops)

Technical Features

Length
40 m
Cable Cross Section
3 x 2.5 mm²

Cable Cross Section

It is the "thickness" of the cable. The thicker it is, the more current it can handle without its temperature rising.

3 x 2.5

Intended for heavier loads, such as general-purpose sockets, power tools, ovens, or refrigerators. It can safely support single-phase power supply lines.
Number of Sockets
4
Nominal Maximum Load
2700 W

Nominal Maximum Load

The maximum electrical load that the extension reel can support without overheating. This applies only when the extension reel is fully unwound. When it is wound, the allowable power is lower due to overheating.

Safety & Protection

Waterproof
No
Overload Protection
No

Overload Protection

The overload protection / thermal switch automatically cuts off the power flow in case of excessive load or overheating, protecting both the device and the cable.

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

See all specifications

Description & Specifications

Electric extension reel with metal drum

Technical specifications:

  • Cable: 3 x 2.5 mm
  • Cable length: 40 m
  • Sockets: 4
  • Maximum voltage: 250 V (AC)
  • Maximum power:
    • 2700W (with fully unwound cable)
    • 1000W (with wound cable)

Important usage instructions:

  • Make electrical connections according to regulations and legislation to prevent workplace accidents. Ensure that the socket is properly grounded.
  • Do not use the extension reel in areas with high humidity or rain.
  • Check the cable or its insulation (PVC sheath) to ensure it is not damaged or bent (heavy objects, between doors, etc.).
  • When the extension reel is used frequently or for long periods during welding processes or with high-power electrical equipment, it is recommended to unwind the cable from the drum to avoid rapid heating (coil effect).

Warning! Exceeding the specified maximum power may cause the cable to melt and lead to accidents.

Manufacturer

Manufacturer Details

Warnings & Safety Information
Product Number
E-PSM25T40

Specifications

Type
Reel
Type
Open Type

Type

Open Type

The reel is open, you can see the cable wound.
Automatic Cable Rewind
No

Automatic Cable Rewind

The cable automatically retracts back into the reel with a "click", just like with a vacuum cleaner.
Industrial Type
No

Industrial Type

Durable socket for heavy-duty use (e.g. construction sites, workshops)

Technical Features

Length
40 m
Cable Cross Section
3 x 2.5 mm²

Cable Cross Section

It is the "thickness" of the cable. The thicker it is, the more current it can handle without its temperature rising.

3 x 2.5

Intended for heavier loads, such as general-purpose sockets, power tools, ovens, or refrigerators. It can safely support single-phase power supply lines.
Number of Sockets
4
Nominal Maximum Load
2700 W

Nominal Maximum Load

The maximum electrical load that the extension reel can support without overheating. This applies only when the extension reel is fully unwound. When it is wound, the allowable power is lower due to overheating.

Safety & Protection

Waterproof
No
Overload Protection
No

Overload Protection

The overload protection / thermal switch automatically cuts off the power flow in case of excessive load or overheating, protecting both the device and the cable.

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.