Skroutz.mt

Bertazzoni Absorption Mechanism 86cm Inox
Vent Hoods

Bertazzoni Absorption Mechanism 86cm Inox Code: KIN86MOD1XB/2

Key features:

  • Energy Class: B
  • Maximum Absorption Power: 700m³/h
  • Noise Level: 62 dB

Built-in Bertazzoni kitchen hood 86cm Inox. With 700m³/h power, SoftTouch buttons, and 2 LEDs. The Italian power that "hides" in your kitchen!

See full description

  • Item

    Absorption Mechanism

    "They are built-in hoods that are installed in cabinets and only the bottom surface of the hood is visible, additionally they do not have sliding filters."

  • Noise Level

    Shows how much noise the extractor makes when it is in operation.

    2. The fewer the db, the quieter it is. An extractor with 58db or less is considered quite quiet.

  • Energy class

    The energy class categorizes devices into groups according to the current they consume, ranging from the lowest D to the highest A+++.

    2. The higher the energy class, the lower the electricity consumption.

    3. For example, for a 12 sq.m. kitchen with an extractor fan that has an absorption power of about 340m³/h and frequent weekly use, the difference in annual cost from D to A is about €6, and from A to A+++ the difference is almost negligible.

  • Extraction Power (Max)

    Displays the maximum absorption capacity. To calculate the required absorbency, knowledge of the dimensions of the kitchen space is necessary.


    For example, for a 7 sqm kitchen, the required absorption power is approximately 200m³/h, for 12 sqm it is approximately 340m³/h, and for 15 sqm it is 420m³/h and above.

  • Filter Type

    Charcoal (optional)

    Carbon filters are used when range hoods operate without a duct connection and the air is recirculated into the room.


    They are not washable and it is recommended to replace them every 4 months.


    Their use reduces the efficiency of the range hood by about 30%.

    Metal

    They are used in most extractors. Metallic filters are easy to remove and clean, either in the dishwasher or by hand. They do not require frequent replacement.
  • See all
Review the product
Product report

Description

Description

At a glance

The built-in Bertazzoni 86cm cooker hood combines high power with a discreet presence. 

✔ Its stainless steel construction offers top durability and is very easy to clean. 

✔ With an extraction capacity of 700 m³/h, it eliminates odors and steam even with the most demanding recipes. 

✔ The SoftTouch buttons ensure a modern and pleasant way to operate the device. 

✔ The integrated lighting with 2 LEDs provides ideal visibility over your hobs, making cooking even more enjoyable.

Italian Design that "Integrates"

If you want a kitchen with clean lines, this chimney-type cooker hood is the ideal choice. Designed to be fully built-in, it leaves only its stainless steel shine visible, offering a professional result that fits any modern home. With a width of 86cm, it comfortably covers even the largest cooking surfaces.

Clean Air Instantly

Don't let odors and steam ruin your cooking. With an impressive absorption capacity of 700 m³/h, this "beast" from Bertazzoni cleans your kitchen's atmosphere before you even notice. Whether you're frying or simmering, the air stays fresh and clean, while also protecting your furniture from moisture.

Handling with Style

Forget about hard and inconvenient buttons. Operation is done through SoftTouch keys, which respond to your lightest touch, making intensity adjustment a breeze. At the same time, the lighting with 2 LEDs bathes the cooking surface with rich, clear light, giving you complete control over everything simmering in your pot!

Why choose it?

  • Professional Power: High absorption capacity for kitchens without any trace of odors.
  • Seamless Look: Fully integrated so it doesn't spoil the aesthetics of your cabinets.
  • Easy Touch: Elegant SoftTouch buttons for comfortable and quick control.
  • Stainless Steel: High-quality material that withstands time and kitchen conditions.
  • Bright Cooking: The 2 LED lights allow you to see every detail of your food.

Manufacturer

Manufacturer Details

Warnings & Safety Information
See full description

Specifications

Specifications

Product Number
KIN86MOD1XB/2

Product Details

Type
Absorption Mechanism

Type

Absorption Mechanism
"They are built-in hoods that are installed in cabinets and only the bottom surface of the hood is visible, additionally they do not have sliding filters."
Retro
No
Grease Filter Material
Charcoal (optional), Metal

Grease Filter Material

Charcoal (optional)

Carbon filters are used when range hoods operate without a duct connection and the air is recirculated into the room.


They are not washable and it is recommended to replace them every 4 months.


Their use reduces the efficiency of the range hood by about 30%.

Metal

They are used in most extractors. Metallic filters are easy to remove and clean, either in the dishwasher or by hand. They do not require frequent replacement.
Extraction Mode
Extraction or Recirculation

Extraction Mode

Concerns the way in which the extractor absorbs air.

Extraction or Recirculation

The extractor fan has both functions. The air that the extractor fan draws can either be extracted through a pipe or recycled back into the fan. For air extraction function, a pipe is needed to remove the air outside the kitchen.
Dual Motor
No
Type of Control
Switches
Timer Function
No
Filter Cleaning Indicator
Yes
Washable Filter
No
Colour
Inox

Technical Features

Extraction Power (Max)
700 m³/h

Extraction Power (Max)

Displays the maximum absorption capacity. To calculate the required absorbency, knowledge of the dimensions of the kitchen space is necessary.


For example, for a 7 sqm kitchen, the required absorption power is approximately 200m³/h, for 12 sqm it is approximately 340m³/h, and for 15 sqm it is 420m³/h and above.

Dimensions

Width
86 cm
Length
-

Energy Label

Energy Class
B

Energy Class

The energy class categorizes devices into groups according to the current they consume, ranging from the lowest D to the highest A+++.

2. The higher the energy class, the lower the electricity consumption.

3. For example, for a 12 sq.m. kitchen with an extractor fan that has an absorption power of about 340m³/h and frequent weekly use, the difference in annual cost from D to A is about €6, and from A to A+++ the difference is almost negligible.
Average Energy Consumption per Year
70 kWh/y
Extraction Flow Efficiency
B

Extraction Flow Efficiency

Expresses how effective the extractor is in absorbing odors. 2. The performance scale starts at G for less efficient extractors and goes up to A for more efficient ones. 3. Typically, a rating of D and above is a good performance for effectively absorbing odors from cooking.
Lighting Efficiency
A

Lighting Efficiency

Expresses the intensity of the hood's lighting. The scale starts from G for the lowest performance where the lighting is quite soft, up to A for the highest performance where the lighting is more intense. It is usually recommended to have a lighting performance index of C or higher to facilitate cooking with more intense lighting.
Fat Retention Efficiency
D

Fat Retention Efficiency

Shows how effectively the filters of the extractor work in retaining fat. 


The scale starts from G for the lowest performance, up to A for the highest performance. 


A performance rating of C and above is considered satisfactory for fat retention during cooking.
Noise Level
62 dB

Noise Level

Shows how much noise the extractor makes when it is in operation.

2. The fewer the db, the quieter it is. An extractor with 58db or less is considered quite quiet.

Smart Features

Connectivity
-

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

See all specifications

Description & Specifications

At a glance

The built-in Bertazzoni 86cm cooker hood combines high power with a discreet presence. 

✔ Its stainless steel construction offers top durability and is very easy to clean. 

✔ With an extraction capacity of 700 m³/h, it eliminates odors and steam even with the most demanding recipes. 

✔ The SoftTouch buttons ensure a modern and pleasant way to operate the device. 

✔ The integrated lighting with 2 LEDs provides ideal visibility over your hobs, making cooking even more enjoyable.

Italian Design that "Integrates"

If you want a kitchen with clean lines, this chimney-type cooker hood is the ideal choice. Designed to be fully built-in, it leaves only its stainless steel shine visible, offering a professional result that fits any modern home. With a width of 86cm, it comfortably covers even the largest cooking surfaces.

Clean Air Instantly

Don't let odors and steam ruin your cooking. With an impressive absorption capacity of 700 m³/h, this "beast" from Bertazzoni cleans your kitchen's atmosphere before you even notice. Whether you're frying or simmering, the air stays fresh and clean, while also protecting your furniture from moisture.

Handling with Style

Forget about hard and inconvenient buttons. Operation is done through SoftTouch keys, which respond to your lightest touch, making intensity adjustment a breeze. At the same time, the lighting with 2 LEDs bathes the cooking surface with rich, clear light, giving you complete control over everything simmering in your pot!

Why choose it?

  • Professional Power: High absorption capacity for kitchens without any trace of odors.
  • Seamless Look: Fully integrated so it doesn't spoil the aesthetics of your cabinets.
  • Easy Touch: Elegant SoftTouch buttons for comfortable and quick control.
  • Stainless Steel: High-quality material that withstands time and kitchen conditions.
  • Bright Cooking: The 2 LED lights allow you to see every detail of your food.

Manufacturer

Manufacturer Details

Warnings & Safety Information
Product Number
KIN86MOD1XB/2

Product Details

Type
Absorption Mechanism

Type

Absorption Mechanism
"They are built-in hoods that are installed in cabinets and only the bottom surface of the hood is visible, additionally they do not have sliding filters."
Retro
No
Grease Filter Material
Charcoal (optional), Metal

Grease Filter Material

Charcoal (optional)

Carbon filters are used when range hoods operate without a duct connection and the air is recirculated into the room.


They are not washable and it is recommended to replace them every 4 months.


Their use reduces the efficiency of the range hood by about 30%.

Metal

They are used in most extractors. Metallic filters are easy to remove and clean, either in the dishwasher or by hand. They do not require frequent replacement.
Extraction Mode
Extraction or Recirculation

Extraction Mode

Concerns the way in which the extractor absorbs air.

Extraction or Recirculation

The extractor fan has both functions. The air that the extractor fan draws can either be extracted through a pipe or recycled back into the fan. For air extraction function, a pipe is needed to remove the air outside the kitchen.
Dual Motor
No
Type of Control
Switches
Timer Function
No
Filter Cleaning Indicator
Yes
Washable Filter
No
Colour
Inox

Technical Features

Extraction Power (Max)
700 m³/h

Extraction Power (Max)

Displays the maximum absorption capacity. To calculate the required absorbency, knowledge of the dimensions of the kitchen space is necessary.


For example, for a 7 sqm kitchen, the required absorption power is approximately 200m³/h, for 12 sqm it is approximately 340m³/h, and for 15 sqm it is 420m³/h and above.

Dimensions

Width
86 cm
Length
-

Energy Label

Energy Class
B

Energy Class

The energy class categorizes devices into groups according to the current they consume, ranging from the lowest D to the highest A+++.

2. The higher the energy class, the lower the electricity consumption.

3. For example, for a 12 sq.m. kitchen with an extractor fan that has an absorption power of about 340m³/h and frequent weekly use, the difference in annual cost from D to A is about €6, and from A to A+++ the difference is almost negligible.
Average Energy Consumption per Year
70 kWh/y
Extraction Flow Efficiency
B

Extraction Flow Efficiency

Expresses how effective the extractor is in absorbing odors. 2. The performance scale starts at G for less efficient extractors and goes up to A for more efficient ones. 3. Typically, a rating of D and above is a good performance for effectively absorbing odors from cooking.
Lighting Efficiency
A

Lighting Efficiency

Expresses the intensity of the hood's lighting. The scale starts from G for the lowest performance where the lighting is quite soft, up to A for the highest performance where the lighting is more intense. It is usually recommended to have a lighting performance index of C or higher to facilitate cooking with more intense lighting.
Fat Retention Efficiency
D

Fat Retention Efficiency

Shows how effectively the filters of the extractor work in retaining fat. 


The scale starts from G for the lowest performance, up to A for the highest performance. 


A performance rating of C and above is considered satisfactory for fat retention during cooking.
Noise Level
62 dB

Noise Level

Shows how much noise the extractor makes when it is in operation.

2. The fewer the db, the quieter it is. An extractor with 58db or less is considered quite quiet.

Smart Features

Connectivity
-

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

722,00 €
83,00 €   shipping cost