Soudal 64A fast-drying wood glue is based on a PVA dispersion and has a high solids content. It bonds softwood, veneer, plywood, particleboard, MDF and HDF, as well as paper and cardboard. It is suitable for indoor use, and the bond can withstand brief contact with running or condensed water.
Apply to one surface with a brush or fine-notched spreader, after cleaning and drying it first. Join the pieces and clamp them for at least 20 minutes. Maximum strength is achieved after approximately 2 hours. Staining may occur on hardwoods such as oak and tropical woods, so testing is recommended.
- Type: Wood glue
- Quantity: 750 ml
- Pieces: 1
- Base: PVA dispersion
- Consistency: Thick liquid
- Solids content: 59–61%
- Appearance after drying: Translucent
- Drying time: Approximately 20 minutes
- Open time: Approximately 5 minutes
- Clamping time: Approximately 1–2 hours at room temperature
- Water resistance: D2 (DIN EN 204)
- Minimum film-forming temperature: 6 °C
- Application temperature: +5 to +30 °C
- Temperature resistance after drying: −20 to +70 °C
- Consumption: Approximately 80–120 g/m² for surface bonding and 150–180 g/m² for assembly
- Cleaning: Clean tools and fresh glue stains with water; remove cured glue mechanically
- Storage: 24 months in the sealed original packaging, in a cool, dry place at +5 to +25 °C; protect from frost
Dimensions
- Type
- Wood Glue
- Epoxy
- No
- 2-Component
- No
- High Temperature
- No
- Pieces
- 1 pcs
Capacity
- Quantity
- 750 ml
Important information
Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.