Replaceable polypropylene filter for pre-filter housings for cold water Aquaphor Gross 10", UST-M and other manufacturers (standard BB 10" / BigBlue 10") - 20, 5 or 1 micron. Retains insoluble impurities in water such as sand, rust, mud and other sediments.
The gradient structure increases the capacity to retain mechanical particles, extending the lifespan of the filter. Dirty water passes from the outside of the filter to the center, with mechanical particles being trapped in the micropores, which become finer towards the inside.
- Size: 253±1 x 110±0.5 mm
- Maximum flow: up to 40 liters / minute
- Maximum operating temperature: +38 °C (100.4 °F)
To purify water from sand, mud, rust and sediments to a level suitable for domestic use, the typical micron rating is 5 microns. In case of very dirty water, it is recommended to install a second filter with a 20-micron polypropylene filter.
Replacement indications: When the pressure or flow rate in the water supply system is reduced, this indicates clogging of the filter. The filter should be replaced at least once every 6 months.
Dimensions
- Filter Material
- Polypropylene
- Micron Rating
- 5 μm
- Compatibility
- 10"
- Set
- No
- Pieces
- 1 pcs
Filter Lifetime
- Replacement Interval
- -
Important information
Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.