Double Zebra Roller Blind
Recommended Measurement Instructions:
- Above the window: Add 15cm to the total height of the window and 20cm to the total width. The fabric width will be 3.5cm smaller than the total roller width.
- Inside the window recess (Frame): Measure the internal dimensions and subtract 1 centimeter from the right and left sides.
Note: If the window opens inward, the roller can only be installed inside the frame if there is a gap between the opening window and the top of the frame. If there is no gap, it must be installed above the frame on the wall.
Control Position (chain): The position of the control is a personal preference. It is usually placed on the hinge side, but this is not a strict rule.
Wrapping Direction: The wrapping can be done either in Method A or Method B, depending on the handle protrusion. In case of protrusion, wrapping away from the wall is preferred.
Notes:
- The shade you see on the screen may differ from the fabric in reality.
- The fabric width is 3.5cm smaller than the total roller width.
- The fabric weight is covered with the same fabric as the roller.
- Total packaging weight: approximately 2kg.
Specifications
- Pattern
- Monochrome
- Colour
- Orange
- Blackout
- Partial Blackout
- Double
- Yes
Dimensions
- Dimension
- 100x100 cm
- Width
- 100 cm
- Height
- 100 cm
Important information
Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.