Double Zebra Roller Shade
Recommended measurement instructions:
- Above the window: Add 15cm to the total height of the window and 20cm to the total width. The fabric width will be 3.5cm narrower than the total roller width due to the mechanism.
- Inside the window recess (Frame): Measure the internal dimensions of the recess and subtract 1 centimeter from the right and left sides, so the roller doesn't touch the surfaces of the recess when moving.
If the window opens inward, the roller can only be installed inside the frame if there is a gap between the opening window and the top part of the frame. Otherwise, the roller must be mounted above the frame on the wall.
Control Position (chain): The position of the control is a personal preference. It is usually placed on the hinge side, but this depends on individual preferences.
Rolling Direction: Whether the roll is done in direction A or B depends on any objects that may obstruct the vertical movement of the fabric. If there is a protruding handle, the roll should be in direction B, away from the wall.
Notes:
- The color you see on your screen may differ slightly from that of the fabric.
- The fabric width is 3.5cm narrower than the total roller width.
- The fabric weight is covered with the same fabric as the roller.
- Total packaging weight: approximately 2kg.
Specifications
- Pattern
- Monochrome
- Colour
- Blue
- Blackout
- Partial Blackout
- Double
- Yes
Dimensions
- Dimension
- 100x100 cm
- Width
- 100 cm
- Height
- 100 cm
Important information
Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.