Double Zebra Roller Blind

Recommended Measurement Instructions:

• Above the window: Add 15cm to the total height of the window and 20cm to the total width. The width of the fabric will be 3.5cm smaller than the total roller width due to the mechanism.
• Inside the window recess (Frame): Measure the inner dimensions of the recess and subtract 1 centimeter from the right and left sides.

Note! If the window opens inward, the roller is installed inside the frame only if there is a gap. Otherwise, the roller should be placed above the frame.

Control Position (chain): The position of the control is a matter of personal preference, but it should not be obstructed by objects.

Rolling Direction: The winding can be done either in Way A or Way B, depending on possible protrusions around the window.

Notes:

• The fabric color may differ from what appears on the screen.
• The width of the fabric is 3.5cm smaller than the total width of the roller.
• The fabric weight is covered with the same fabric as the roller.
• Total packaging weight: approximately 2kg.