Double Zebra Roller Blind
Recommended Measuring Instructions:
- Above the window: Add 15cm to the total height of the window and 20cm to the total width. The fabric width will be 3.5cm smaller than the total roller width due to the mechanism.
- Inside the window recess (Frame): Measure the internal dimensions of the recess and subtract 1 centimeter from the right and left sides, so the roller does not touch the surfaces of the recess.
Note: If the window opens inward and is not a sliding window, the roller can only be installed inside the frame if there is a gap between the outward opening window and the top of the frame. If there is no gap, the roller must be mounted above the frame on the wall.
Control Position (chain): The position of the control is purely a personal preference. Ensure that its movement is not obstructed by any object.
Rolling Direction: Whether the roll-up is done with method A or B depends on the presence of an obstacle in the vertical movement of the fabric.
Notes:
- The fabric shade may have some deviation from what you see on your screen.
- The fabric width is 3.5cm smaller than the total width of the roller.
- The weight of the fabric is covered with the same fabric as the roller.
- Total packaging weight: approximately 2kg.
Specifications
- Pattern
- Monochrome
- Colour
- Red
- Blackout
- Partial Blackout
- Double
- Yes
Dimensions
- Dimension
- 100x200 cm
- Width
- 100 cm
- Height
- 200 cm
Important information
Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.