Double Zebra Roller Blinds
Recommended Measurement Instructions
- Above the window: Add 15cm to the total height of the window and 20cm to the total width. The fabric width is 3.5cm narrower than the overall roller width due to the mechanism.
- Inside the window recess (Casing): Measure the internal dimensions and subtract 1 centimeter from the right and left to prevent the roller from touching the surfaces of the recess.
Attention! If the window opens inward, the roller can only be installed inside the casing if there is a gap between the opening window and the top of the casing. Otherwise, the roller must be mounted above the casing.
Control Position (chain): The position of the control is a personal preference. It is usually placed on the side of the hinges, but this is not a rule.
Rolling Direction: Whether the winding is done in direction A or B depends on any obstacles. If there is a protruding handle, the winding should be done away from the wall (direction B).
Notes:
- The fabric color may differ from what you see on your screen.
- The fabric width is 3.5cm narrower than the total roller width.
- The fabric weight is covered with the same fabric as the roller.
- Total package weight: approximately 2kg.
Specifications
- Pattern
- Monochrome
- Colour
- -
- Blackout
- Partial Blackout
- Double
- Yes
Dimensions
- Dimension
- 100x100 cm
- Width
- 100 cm
- Height
- 100 cm
Important information
Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.