Fishing Rod Cases & Tubes

Sim Engineering Hard Allround Fishing Rod Case 1 Position 1.75m Code: 38.22.84.004

Hard rod case made of durable 600D Nylon with PVC lining. It has a length of 1.75m, ideal for Spinning and Shore rods with their reels, as its cavity is perfectly positioned for rods of this...

Hard rod case made of durable 600D Nylon with PVC lining. It has a length of 1.75m, ideal for Spinning and Shore rods with their reels, as its cavity is perfectly positioned for rods of this technique. It features a shoulder strap, 2 zippers with rubber handles for easier use, and a reinforced base with hard plastic.

  • Code: 38.22.84.004
  • Dimensions: 175 X 12...
See full description See full description

Description

Description

Hard rod case made of durable 600D Nylon with PVC lining. It has a length of 1.75m, ideal for Spinning and Shore rods with their reels, as its cavity is perfectly positioned for rods of this technique. It features a shoulder strap, 2 zippers with rubber handles for easier use, and a reinforced base with hard plastic.

  • Code: 38.22.84.004
  • Dimensions: 175 X 12 X Ø10cm

Manufacturer

See full description

Specifications

Specifications

Product Number
38.22.84.004
Length
1.75 m

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

See all specifications

Reviews (5)

Reviews

  1. 2
  2. 1
  3. 2
  4. 2 stars
    0
  5. 1 star
    0
Review this product
  • This review is about the length: 1.5 m

    It's good... it protects... it doesn't fit the mechanism with the crank open and the turntable must be in a specific position to close the zipper of the case.

    Translated from Greek ·
    Did you find this review helpful?
  • This review is about the length: 1.5 m

    Good case and sturdy for spinning and LRF rods.. I give it 3 stars though because even though it advertises that it can fit the reel as well, unfortunately it doesn't fit....you have to remove the handle.

    Translated from Greek ·
    Did you find this review helpful?
  • dimitris_pardalos
    4
    1 out of 1 members found this review helpful

    Verified purchase

    This review is about the length: 1.5 m

    I give it 4 stars because a rod that has the reel higher up does not fit together with the reel. The case is very good and sturdy, but it is for rods that have their reel at the bottom, so you can say it's great for casting rods and some others, but I wouldn't recommend it for someone to buy unless they carefully check the distance between the reel and the rod's handle. If it is at the bottom like the LRF and spinning rods, then yes, it's good, but for other rods, it doesn't fit! Luckily, I have LRF equipment which will eventually be suitable for LRF and spinning equipment

    Translated from Greek ·
    Did you find this review helpful?
  • Verified purchase

    This review is about the length: 1.5 m

    Sturdy durable case. The rod does not move and thus is excellently protected.

    Translated from Greek ·
    Did you find this review helpful?
  • This review is about the length: 1.5 m

  • It's good... it protects... it doesn't fit the mechanism with the crank open and the turntable must be in a specific position to close the zipper of the case.

    Translated from Greek ·
    0
  • Good case and sturdy for spinning and LRF rods.. I give it 3 stars though because even though it advertises that it can fit the reel as well, unfortunately it doesn't fit....you have to remove the handle.

    Translated from Greek ·
    0
  • I give it 4 stars because a rod that has the reel higher up does not fit together with the reel. The case is very good and sturdy, but it is for rods that have their reel at the bottom, so you can say it's great for casting rods and some others, but I wouldn't recommend it for someone to buy unless they carefully check the distance between the reel and the rod's handle. If it is at the bottom like the LRF and spinning rods, then yes, it's good, but for other rods, it doesn't fit! Luckily, I have LRF equipment which will eventually be suitable for LRF and spinning equipment

    Translated from Greek ·
    1
  • Sturdy durable case. The rod does not move and thus is excellently protected.

    Translated from Greek ·
    0
  • 0
  • See all

Description & Specifications

Hard rod case made of durable 600D Nylon with PVC lining. It has a length of 1.75m, ideal for Spinning and Shore rods with their reels, as its cavity is perfectly positioned for rods of this technique. It features a shoulder strap, 2 zippers with rubber handles for easier use, and a reinforced base with hard plastic.

  • Code: 38.22.84.004
  • Dimensions: 175 X 12 X Ø10cm

Manufacturer

Product Number
38.22.84.004
Length
1.75 m

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

Reviews (5)

  1. 2
  2. 1
  3. 2
  4. 2 stars
    0
  5. 1 star
    0
Review this product
  • This review is about the length: 1.5 m

    It's good... it protects... it doesn't fit the mechanism with the crank open and the turntable must be in a specific position to close the zipper of the case.

    Translated from Greek ·
    Did you find this review helpful?
  • This review is about the length: 1.5 m

    Good case and sturdy for spinning and LRF rods.. I give it 3 stars though because even though it advertises that it can fit the reel as well, unfortunately it doesn't fit....you have to remove the handle.

    Translated from Greek ·
    Did you find this review helpful?
  • dimitris_pardalos
    4
    1 out of 1 members found this review helpful

    Verified purchase

    This review is about the length: 1.5 m

    I give it 4 stars because a rod that has the reel higher up does not fit together with the reel. The case is very good and sturdy, but it is for rods that have their reel at the bottom, so you can say it's great for casting rods and some others, but I wouldn't recommend it for someone to buy unless they carefully check the distance between the reel and the rod's handle. If it is at the bottom like the LRF and spinning rods, then yes, it's good, but for other rods, it doesn't fit! Luckily, I have LRF equipment which will eventually be suitable for LRF and spinning equipment

    Translated from Greek ·
    Did you find this review helpful?
  • Verified purchase

    This review is about the length: 1.5 m

    Sturdy durable case. The rod does not move and thus is excellently protected.

    Translated from Greek ·
    Did you find this review helpful?
  • This review is about the length: 1.5 m

  • It's good... it protects... it doesn't fit the mechanism with the crank open and the turntable must be in a specific position to close the zipper of the case.

    Translated from Greek ·
    0
  • Good case and sturdy for spinning and LRF rods.. I give it 3 stars though because even though it advertises that it can fit the reel as well, unfortunately it doesn't fit....you have to remove the handle.

    Translated from Greek ·
    0
  • I give it 4 stars because a rod that has the reel higher up does not fit together with the reel. The case is very good and sturdy, but it is for rods that have their reel at the bottom, so you can say it's great for casting rods and some others, but I wouldn't recommend it for someone to buy unless they carefully check the distance between the reel and the rod's handle. If it is at the bottom like the LRF and spinning rods, then yes, it's good, but for other rods, it doesn't fit! Luckily, I have LRF equipment which will eventually be suitable for LRF and spinning equipment

    Translated from Greek ·
    1
  • Sturdy durable case. The rod does not move and thus is excellently protected.

    Translated from Greek ·
    0
  • 0
  • See all
26,00 €
14,00 €   shipping cost