Discover the ideal solution for supporting your phone in the car with this magnetic mount. Placing your phone is easy and fast, without complicated mechanisms or hooks, thanks to magnet technology.
...
Discover the ideal solution for supporting your phone in the car with this magnetic mount. Placing your phone is easy and fast, without complicated mechanisms or hooks, thanks to magnet technology.
The mount is placed on the car's dashboard, ensuring it is always within line of sight for optimal use.
I couldn't get my phone out of the mount in any of my attempts.
Its arm, as well as its rotational movement, require a lot of force/weight, so they don't turn on their own under the weight of the phone.
It doesn't make any "cheap plastic" noises when moving.
I'll also use it in a car. For now, I wanted it as a mount for my phone for video shots, but I shook it around a lot without it moving. So I don't feel that's a problem. I still need to get a better idea of how well its suction cup works. When I tried to remove it by hand from a flat surface, it was impossible. So I assume that if someone has a problem, it may be due to dust on their dashboard or its texture.
CLEAN THE SURFACE WHERE THE MOUNT WILL BE PLACED.
I know that the way I tested it so far isn't 100% accurate. I'll come back with a test in a car too, but I believe that my attempt to pull it off or shake it is "worse" than what could happen on the road.
Δε κατάφερα σε καμία δοκιμή να βγάλω το κινητό μου απο τη βάση.
Το Arm του όπως επίσης και η περιστροφική του κίνηση, απαιτούν πολύ δύναμη/βάρος, οπότε δε γυρνάνε μόνα τους απο το βάρος του κινητού.
Δεν κάνει θορύβους "κακών πλαστικών" κατά την κίνηση.
Θα χρησιμοποιηθεί και σε αμάξι, προς το παρόν το ήθελα για Mount Στο κινητό μου για πλάνα για Video αλλά το κοπάνησα πολύ χωρίς να κουνηθεί. Οπότε δε νιώθω πως είναι πρόβλημα αυτό. Μένει να έχω καλύτερη άποψη για την βεντούζα του. Σε δοκιμή να το βγάλω με το χέρι απο φλατ επιφάνεια, ήταν αδύνατο. Οπότε υποθέτω εάν κάποιος έχει πρόβλημα, ίσως φταίει σκόνη στο ταμπλό του ή το texture του.
ΝΑ ΚΑΘΑΡΙΣΤΕΙ Η ΕΠΙΦΑΝΕΙΑ ΠΟΥ ΘΑ ΜΠΕΙ Η ΒΑΣΗ.
Το ξέρω πως δεν ειναι 100% σωστός ο τρόπος που το δοκίμασα προς το παρόν, θα επανέλθω με δοκιμή και σε αμάξι αλλά πιστεύω ότι η προσπάθεια μου να το ξεκολλήσω ή να το κουνήσω, είναι "χειρότερη" απο το τι μπορεί να γίνει στο δρόμο.
I couldn't get my phone out of the mount in any of my attempts.
Its arm, as well as its rotational movement, require a lot of force/weight, so they don't turn on their own under the weight of the phone.
It doesn't make any "cheap plastic" noises when moving.
I'll also use it in a car. For now, I wanted it as a mount for my phone for video shots, but I shook it around a lot without it moving. So I don't feel that's a problem. I still need to get a better idea of how well its suction cup works. When I tried to remove it by hand from a flat surface, it was impossible. So I assume that if someone has a problem, it may be due to dust on their dashboard or its texture.
CLEAN THE SURFACE WHERE THE MOUNT WILL BE PLACED.
I know that the way I tested it so far isn't 100% accurate. I'll come back with a test in a car too, but I believe that my attempt to pull it off or shake it is "worse" than what could happen on the road.
Δε κατάφερα σε καμία δοκιμή να βγάλω το κινητό μου απο τη βάση.
Το Arm του όπως επίσης και η περιστροφική του κίνηση, απαιτούν πολύ δύναμη/βάρος, οπότε δε γυρνάνε μόνα τους απο το βάρος του κινητού.
Δεν κάνει θορύβους "κακών πλαστικών" κατά την κίνηση.
Θα χρησιμοποιηθεί και σε αμάξι, προς το παρόν το ήθελα για Mount Στο κινητό μου για πλάνα για Video αλλά το κοπάνησα πολύ χωρίς να κουνηθεί. Οπότε δε νιώθω πως είναι πρόβλημα αυτό. Μένει να έχω καλύτερη άποψη για την βεντούζα του. Σε δοκιμή να το βγάλω με το χέρι απο φλατ επιφάνεια, ήταν αδύνατο. Οπότε υποθέτω εάν κάποιος έχει πρόβλημα, ίσως φταίει σκόνη στο ταμπλό του ή το texture του.
ΝΑ ΚΑΘΑΡΙΣΤΕΙ Η ΕΠΙΦΑΝΕΙΑ ΠΟΥ ΘΑ ΜΠΕΙ Η ΒΑΣΗ.
Το ξέρω πως δεν ειναι 100% σωστός ο τρόπος που το δοκίμασα προς το παρόν, θα επανέλθω με δοκιμή και σε αμάξι αλλά πιστεύω ότι η προσπάθεια μου να το ξεκολλήσω ή να το κουνήσω, είναι "χειρότερη" απο το τι μπορεί να γίνει στο δρόμο.
Discover the ideal solution for supporting your phone in the car with this magnetic mount. Placing your phone is easy and fast, without complicated mechanisms or hooks, thanks to magnet technology.
The mount is placed on the car's dashboard, ensuring it is always within line of sight for optimal use.
Key features:
Magnetic support for easy placement.
Dashboard mounting.
Fully compatible with all iPhone models from the iPhone 12 series and newer.
Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.
I couldn't get my phone out of the mount in any of my attempts.
Its arm, as well as its rotational movement, require a lot of force/weight, so they don't turn on their own under the weight of the phone.
It doesn't make any "cheap plastic" noises when moving.
I'll also use it in a car. For now, I wanted it as a mount for my phone for video shots, but I shook it around a lot without it moving. So I don't feel that's a problem. I still need to get a better idea of how well its suction cup works. When I tried to remove it by hand from a flat surface, it was impossible. So I assume that if someone has a problem, it may be due to dust on their dashboard or its texture.
CLEAN THE SURFACE WHERE THE MOUNT WILL BE PLACED.
I know that the way I tested it so far isn't 100% accurate. I'll come back with a test in a car too, but I believe that my attempt to pull it off or shake it is "worse" than what could happen on the road.
Δε κατάφερα σε καμία δοκιμή να βγάλω το κινητό μου απο τη βάση.
Το Arm του όπως επίσης και η περιστροφική του κίνηση, απαιτούν πολύ δύναμη/βάρος, οπότε δε γυρνάνε μόνα τους απο το βάρος του κινητού.
Δεν κάνει θορύβους "κακών πλαστικών" κατά την κίνηση.
Θα χρησιμοποιηθεί και σε αμάξι, προς το παρόν το ήθελα για Mount Στο κινητό μου για πλάνα για Video αλλά το κοπάνησα πολύ χωρίς να κουνηθεί. Οπότε δε νιώθω πως είναι πρόβλημα αυτό. Μένει να έχω καλύτερη άποψη για την βεντούζα του. Σε δοκιμή να το βγάλω με το χέρι απο φλατ επιφάνεια, ήταν αδύνατο. Οπότε υποθέτω εάν κάποιος έχει πρόβλημα, ίσως φταίει σκόνη στο ταμπλό του ή το texture του.
ΝΑ ΚΑΘΑΡΙΣΤΕΙ Η ΕΠΙΦΑΝΕΙΑ ΠΟΥ ΘΑ ΜΠΕΙ Η ΒΑΣΗ.
Το ξέρω πως δεν ειναι 100% σωστός ο τρόπος που το δοκίμασα προς το παρόν, θα επανέλθω με δοκιμή και σε αμάξι αλλά πιστεύω ότι η προσπάθεια μου να το ξεκολλήσω ή να το κουνήσω, είναι "χειρότερη" απο το τι μπορεί να γίνει στο δρόμο.
I couldn't get my phone out of the mount in any of my attempts.
Its arm, as well as its rotational movement, require a lot of force/weight, so they don't turn on their own under the weight of the phone.
It doesn't make any "cheap plastic" noises when moving.
I'll also use it in a car. For now, I wanted it as a mount for my phone for video shots, but I shook it around a lot without it moving. So I don't feel that's a problem. I still need to get a better idea of how well its suction cup works. When I tried to remove it by hand from a flat surface, it was impossible. So I assume that if someone has a problem, it may be due to dust on their dashboard or its texture.
CLEAN THE SURFACE WHERE THE MOUNT WILL BE PLACED.
I know that the way I tested it so far isn't 100% accurate. I'll come back with a test in a car too, but I believe that my attempt to pull it off or shake it is "worse" than what could happen on the road.
Δε κατάφερα σε καμία δοκιμή να βγάλω το κινητό μου απο τη βάση.
Το Arm του όπως επίσης και η περιστροφική του κίνηση, απαιτούν πολύ δύναμη/βάρος, οπότε δε γυρνάνε μόνα τους απο το βάρος του κινητού.
Δεν κάνει θορύβους "κακών πλαστικών" κατά την κίνηση.
Θα χρησιμοποιηθεί και σε αμάξι, προς το παρόν το ήθελα για Mount Στο κινητό μου για πλάνα για Video αλλά το κοπάνησα πολύ χωρίς να κουνηθεί. Οπότε δε νιώθω πως είναι πρόβλημα αυτό. Μένει να έχω καλύτερη άποψη για την βεντούζα του. Σε δοκιμή να το βγάλω με το χέρι απο φλατ επιφάνεια, ήταν αδύνατο. Οπότε υποθέτω εάν κάποιος έχει πρόβλημα, ίσως φταίει σκόνη στο ταμπλό του ή το texture του.
ΝΑ ΚΑΘΑΡΙΣΤΕΙ Η ΕΠΙΦΑΝΕΙΑ ΠΟΥ ΘΑ ΜΠΕΙ Η ΒΑΣΗ.
Το ξέρω πως δεν ειναι 100% σωστός ο τρόπος που το δοκίμασα προς το παρόν, θα επανέλθω με δοκιμή και σε αμάξι αλλά πιστεύω ότι η προσπάθεια μου να το ξεκολλήσω ή να το κουνήσω, είναι "χειρότερη" απο το τι μπορεί να γίνει στο δρόμο.