Skroutz.mt

DEWALT DCD803P2T Battery Power Drill Driver Brushless 18V 2x5Ah
Power Drill Drivers & Screwdrivers

DEWALT DCD803P2T Battery Power Drill Driver Brushless 18V 2x5Ah

Key features:

  • Voltage: 18V
  • Number of Batteries: 2x5Ah
  • Motor Type: Brushless
  • Number of Speeds: 2
  • Torque Settings: 15 positions
See full description

  • Power Supply

    Battery

    Indicates whether the tool operates on battery or directly from the mains. Battery-powered tools offer freedom of movement, while electric ones provide continuous power.
  • Number of Batteries 2

  • Speed Setting

    Ability to adjust the rotation speed according to the task (low speed for screwing, higher speed for drilling into larger walls, maximum speed for drilling into concrete)

  • Voltage

    It corresponds to the power of the tool. Higher voltage means more power and durability for heavy-duty tasks.

  • Battery Capacity

    The battery capacity. The higher the number, the longer the tool's operating time. An average continuous working time is 20-25 minutes per ah, but it always depends on the type of work we are doing.

  • Maximum Motor Speed

    The maximum rotational speed of the engine in revolutions per minute. For drilling tasks, a number of revolutions up to 1500rpm is perfectly satisfactory, as there is a risk of breaking the drill bit due to the increase in temperature above that level, while for screwing tasks higher speeds can be used, especially if the material is soft such as wood or plasterboard.

  • Torque Setting

    The ability to adjust the torque of the tool's operation according to the task at hand. (Low torque for easy screwing/unscrewing, high torque for drilling into walls).

  • Brushless

    The advantage that brushless motors have over brushed ones is that they do not have friction since there are no carbon brushes. Without carbon brushes, the motors are more efficient and have a longer lifespan as there is no wear (the carbon brushes in brushed motors wear out with use). They produce less noise, maintain constant torque at all speeds, do not overheat, and require no maintenance.

    1

    It features a brushless motor that produces less heat and friction, resulting in less wear on the motor and a longer battery life. It also provides more stable power and speed, allowing for smoother and more precise operation. 2. In general, brushless motors are more efficient and have a longer lifespan than motors with brushes, making them a popular choice for electric tools.
  • See all
438 90 €
Delivery by Thu, 02 Jul
14,00 €   shipping cost
Sent from Greece
From Prostore 5.0 (20)
5.0 (20 reviews)
Greece
3 pieces
See Power Tools on the page of Prostore
Review the product
Product report

Description

Description

Professional multi-head drill driver with Brushless motor technology, designed for maximum flexibility in confined spaces. The system features four interchangeable heads that allow drilling and screwing at angles or at a distance from the edge, offering full access to hard-to-reach areas. The use of XR batteries ensures high autonomy and compatibility with the entire range of Dewalt 18V tools.

At a glance

The drill driver by Dewalt operates with a Dewalt XR Li-Ion 18V battery. It is suitable for both screwing and unscrewing, as well as drilling holes. Specifically, it can drill wood with a hole diameter of up to 20 millimeters, steel with a hole diameter of up to 10 millimeters, and various other construction materials.
It features adjustable rotation speed and torque, so you can set it according to the task you want to perform. Usually, lower settings are needed for screwing and unscrewing, and higher ones for drilling into walls or concrete. Additionally, you can change chucks of various types to better adapt to the work you want to do.

Specifications

  • Voltage: 18V
  • Motor Type: Brushless
  • Maximum Torque (Hard): 57 Nm
  • Maximum Torque (Soft): 25 Nm
  • No-load Speed: 0-450 / 0-1500 rpm
  • Number of Speeds: 2
  • Torque Settings: 15 positions
  • Chuck Capacity: 10 mm
  • Maximum Drilling Capacity (Wood): 20 mm
  • Maximum Drilling Capacity (Metal): 10 mm
  • Tool Length: 128 mm (without head)
  • Net Weight (without battery): 0.73 kg

Manufacturer

Manufacturer Details

Warnings & Safety Information
See full description

Specifications

Specifications

Product Details

Type
Drill Driver

Type

Drill Driver

Suitable for screwing-unscrewing and drilling holes in wood, metal, and various building materials.
Power Source
Battery

Power Source

Battery
Indicates whether the tool operates on battery or directly from the mains. Battery-powered tools offer freedom of movement, while electric ones provide continuous power.
Brushless
Yes

Brushless

The advantage that brushless motors have over brushed ones is that they do not have friction since there are no carbon brushes. Without carbon brushes, the motors are more efficient and have a longer lifespan as there is no wear (the carbon brushes in brushed motors wear out with use). They produce less noise, maintain constant torque at all speeds, do not overheat, and require no maintenance.


It features a brushless motor that produces less heat and friction, resulting in less wear on the motor and a longer battery life. It also provides more stable power and speed, allowing for smoother and more precise operation. 2. In general, brushless motors are more efficient and have a longer lifespan than motors with brushes, making them a popular choice for electric tools.

Battery Features

Number of Batteries
2
Battery Voltage
18 V

Battery Voltage

It corresponds to the power of the tool. Higher voltage means more power and durability for heavy-duty tasks.
Battery Capacity
5 Ah

Battery Capacity

The battery capacity. The higher the number, the longer the tool's operating time. An average continuous working time is 20-25 minutes per ah, but it always depends on the type of work we are doing.
Secondary Battery Charge Ah
5 Ah
Compatible Battery Type
Dewalt XR Li-Ion 18V

Compatible Battery Type

The type of battery that can be installed in the tool.

Drilling Abilities

Steel Ø
10 mm

Steel Ø

The maximum possible drilling diameter in metal. The most common diameter for household screws is 6-8mm.
Wood Ø
20 mm

Features & Functions

Maximum Motor Speed
1650 rpm

Maximum Motor Speed

The maximum rotational speed of the engine in revolutions per minute. For drilling tasks, a number of revolutions up to 1500rpm is perfectly satisfactory, as there is a risk of breaking the drill bit due to the increase in temperature above that level, while for screwing tasks higher speeds can be used, especially if the material is soft such as wood or plasterboard.
Speed Adjustment
Yes

Speed Adjustment

Ability to adjust the rotation speed according to the task (low speed for screwing, higher speed for drilling into larger walls, maximum speed for drilling into concrete)
Maximum Torque
73 Nm

Maximum Torque

The maximum power that the tool can deliver to rotate a drill or a screw. Up to 20Nm, we can screw/unscrew small screws that do not require a lot of force to rotate. From 20 to 60Nm, we can perform drilling tasks in addition to screwing. More than 60Nm is mainly encountered in impact drivers that can screw/unscrew screws that require a lot of force to rotate, such as bolts.
Torque Adjustment
Yes

Torque Adjustment

The ability to adjust the torque of the tool's operation according to the task at hand. (Low torque for easy screwing/unscrewing, high torque for drilling into walls).
Percussive
No

Percussive

The impact function provides high power to easily and quickly complete even the most demanding tasks.
Angle
No
Interchangeable Head
Yes

Interchangeable Head


Ability to switch between different types of chucks for a wider range of tasks.
Reception
Interchangeable Heads
Net Weight
970 gr

Extra Features

Carrying Case
Hard Case

Carrying Case

Hard Case
Delivered with a hard carrying case.
Handle Included
No
Integrated Light
Yes

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

See all specifications

Description & Specifications

Professional multi-head drill driver with Brushless motor technology, designed for maximum flexibility in confined spaces. The system features four interchangeable heads that allow drilling and screwing at angles or at a distance from the edge, offering full access to hard-to-reach areas. The use of XR batteries ensures high autonomy and compatibility with the entire range of Dewalt 18V tools.

At a glance

The drill driver by Dewalt operates with a Dewalt XR Li-Ion 18V battery. It is suitable for both screwing and unscrewing, as well as drilling holes. Specifically, it can drill wood with a hole diameter of up to 20 millimeters, steel with a hole diameter of up to 10 millimeters, and various other construction materials.
It features adjustable rotation speed and torque, so you can set it according to the task you want to perform. Usually, lower settings are needed for screwing and unscrewing, and higher ones for drilling into walls or concrete. Additionally, you can change chucks of various types to better adapt to the work you want to do.

Specifications

  • Voltage: 18V
  • Motor Type: Brushless
  • Maximum Torque (Hard): 57 Nm
  • Maximum Torque (Soft): 25 Nm
  • No-load Speed: 0-450 / 0-1500 rpm
  • Number of Speeds: 2
  • Torque Settings: 15 positions
  • Chuck Capacity: 10 mm
  • Maximum Drilling Capacity (Wood): 20 mm
  • Maximum Drilling Capacity (Metal): 10 mm
  • Tool Length: 128 mm (without head)
  • Net Weight (without battery): 0.73 kg

Manufacturer

Manufacturer Details

Warnings & Safety Information

Product Details

Type
Drill Driver

Type

Drill Driver

Suitable for screwing-unscrewing and drilling holes in wood, metal, and various building materials.
Power Source
Battery

Power Source

Battery
Indicates whether the tool operates on battery or directly from the mains. Battery-powered tools offer freedom of movement, while electric ones provide continuous power.
Brushless
Yes

Brushless

The advantage that brushless motors have over brushed ones is that they do not have friction since there are no carbon brushes. Without carbon brushes, the motors are more efficient and have a longer lifespan as there is no wear (the carbon brushes in brushed motors wear out with use). They produce less noise, maintain constant torque at all speeds, do not overheat, and require no maintenance.


It features a brushless motor that produces less heat and friction, resulting in less wear on the motor and a longer battery life. It also provides more stable power and speed, allowing for smoother and more precise operation. 2. In general, brushless motors are more efficient and have a longer lifespan than motors with brushes, making them a popular choice for electric tools.

Battery Features

Number of Batteries
2
Battery Voltage
18 V

Battery Voltage

It corresponds to the power of the tool. Higher voltage means more power and durability for heavy-duty tasks.
Battery Capacity
5 Ah

Battery Capacity

The battery capacity. The higher the number, the longer the tool's operating time. An average continuous working time is 20-25 minutes per ah, but it always depends on the type of work we are doing.
Secondary Battery Charge Ah
5 Ah
Compatible Battery Type
Dewalt XR Li-Ion 18V

Compatible Battery Type

The type of battery that can be installed in the tool.

Drilling Abilities

Steel Ø
10 mm

Steel Ø

The maximum possible drilling diameter in metal. The most common diameter for household screws is 6-8mm.
Wood Ø
20 mm

Features & Functions

Maximum Motor Speed
1650 rpm

Maximum Motor Speed

The maximum rotational speed of the engine in revolutions per minute. For drilling tasks, a number of revolutions up to 1500rpm is perfectly satisfactory, as there is a risk of breaking the drill bit due to the increase in temperature above that level, while for screwing tasks higher speeds can be used, especially if the material is soft such as wood or plasterboard.
Speed Adjustment
Yes

Speed Adjustment

Ability to adjust the rotation speed according to the task (low speed for screwing, higher speed for drilling into larger walls, maximum speed for drilling into concrete)
Maximum Torque
73 Nm

Maximum Torque

The maximum power that the tool can deliver to rotate a drill or a screw. Up to 20Nm, we can screw/unscrew small screws that do not require a lot of force to rotate. From 20 to 60Nm, we can perform drilling tasks in addition to screwing. More than 60Nm is mainly encountered in impact drivers that can screw/unscrew screws that require a lot of force to rotate, such as bolts.
Torque Adjustment
Yes

Torque Adjustment

The ability to adjust the torque of the tool's operation according to the task at hand. (Low torque for easy screwing/unscrewing, high torque for drilling into walls).
Percussive
No

Percussive

The impact function provides high power to easily and quickly complete even the most demanding tasks.
Angle
No
Interchangeable Head
Yes

Interchangeable Head


Ability to switch between different types of chucks for a wider range of tasks.
Reception
Interchangeable Heads
Net Weight
970 gr

Extra Features

Carrying Case
Hard Case

Carrying Case

Hard Case
Delivered with a hard carrying case.
Handle Included
No
Integrated Light
Yes

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

438,90 €
14,00 €   shipping cost