The PLA filament for 3D printing has a diameter of 1.75 mm and contains metallic particles that give prints a glossy finish. RFID technology automatically detects the printing parameters, and the filament is compatible with AMS. It is suitable for printing decorative objects and jewellery.

A nozzle with a diameter of 0.4 mm or larger is recommended. Before printing, the filament should be dried at 55 °C for 8 hours, and the humidity in the container should be kept below 20% RH.

• Material: PLA
• Colour: Grey
• Diameter: 1.75 mm ± 0.03 mm
• Weight: 1 kg
• Packaging: Spool
• Quantity: 1 piece
• Nozzle temperature: 190–230 °C
• Bed temperature: 35–45 °C
• Density: 1.26 g/cm³
• Vicat softening temperature: 57 °C
• Heat deflection temperature: 55 °C
• Melting temperature: 156 °C
• Melt flow rate: 34.2 ± 3.3 g/10 min
• Tensile strength: 39 ± 3 MPa
• Elongation at break: 11.7 ± 0.7%
• Flexural modulus: 2350 ± 140 MPa
• Flexural strength: 75 ± 4 MPa
• Impact strength: 66.5 ± 3.6 kJ/m²