Skroutz.mt

Platinet Car and Motorcycle Battery Charger 6/12V 3.8A
Jump Starters & Battery Chargers

Platinet Car and Motorcycle Battery Charger 6/12V 3.8A Code: PCBC38

The 6V/12V 3.8A car battery starter and charger features 6 charging stages and is suitable for 6V and 12V batteries from 4Ah to 120Ah. It is compatible with lead-acid batteries, including AGM and gel...

The 6V/12V 3.8A car battery starter and charger features 6 charging stages and is suitable for 6V and 12V batteries from 4Ah to 120Ah. It is compatible with lead-acid batteries, including AGM and gel types.

  • Protection rating: IP65
  • LED status indicators
  • Current: 1A / 3.8A
  • Voltage: 6V / 12V
  • Battery capacity: 4Ah to 120Ah
  • Cable length: 1.5m + 1.5m
  • Dimensions:...
See Description & Specifications See Description & Specifications

Top specs

  • Voltage

    6/12

    Suitable for use in older or smaller vehicles with 6 Volt batteries as well as in passenger cars, motorcycles, and small trucks with 12 Volt batteries.

  • Compatible Batteries

    AGM

    Suitable for use with sealed AGM (Absorbent Glass Mat) batteries. Commonly used in modern vehicles and start-stop systems.

    GEL

    Suitable for use in sealed batteries with electrolyte in GEL form. Often used in motorcycles and passenger vehicles.

    Lead Acid

    Suitable for use in classic types of batteries with liquid electrolyte. Widely used in cars and motorcycles.

  • Maximum Charging Current

    Measured in Amperes (A), it determines how quickly the device can "fill" your battery. The higher the number, the faster the charging. For small batteries (e.g. motorcycle) or simple maintenance, a few Amperes are enough, while for faster charging in cars you will need a higher current.

Learn more about invoicing
Review the product
Product report

Description & Specifications

The 6V/12V 3.8A car battery starter and charger features 6 charging stages and is suitable for 6V and 12V batteries from 4Ah to 120Ah. It is compatible with lead-acid batteries, including AGM and gel types.

  • Protection rating: IP65
  • LED status indicators
  • Current: 1A / 3.8A
  • Voltage: 6V / 12V
  • Battery capacity: 4Ah to 120Ah
  • Cable length: 1.5m + 1.5m
  • Dimensions: 155 x 53 x 40 mm

It is a safe and reliable choice for charging car batteries.

Manufacturer

Manufacturer Details

Warnings & Safety Information
Product Number
PCBC38

Dimensions

Type
Chargers

Type

Chargers

It charges your vehicle's battery when it runs out or helps maintain it when the vehicle is not frequently moving. It does not have the ability to directly start the vehicle.
Compatible Batteries
AGM, GEL, Lead Acid

Compatible Batteries

AGM

Suitable for use with sealed AGM (Absorbent Glass Mat) batteries. Commonly used in modern vehicles and start-stop systems.

GEL

Suitable for use in sealed batteries with electrolyte in GEL form. Often used in motorcycles and passenger vehicles.

Lead Acid

Suitable for use in classic types of batteries with liquid electrolyte. Widely used in cars and motorcycles.

Technical Features

Maximum Charging Current
1 A

Maximum Charging Current

Measured in Amperes (A), it determines how quickly the device can "fill" your battery. The higher the number, the faster the charging. For small batteries (e.g. motorcycle) or simple maintenance, a few Amperes are enough, while for faster charging in cars you will need a higher current.
Voltage
6/12 V

Voltage

6/12

Suitable for use in older or smaller vehicles with 6 Volt batteries as well as in passenger cars, motorcycles, and small trucks with 12 Volt batteries.

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

30,90 €
14,00 €   shipping cost