Sika polyurethane sealant is a pigmented, aliphatic, two-component coating for the final protective layer on swimming pools and tanks. It forms a hard film that resists continuous contact with water, ultraviolet radiation and pool treatment chemicals, while retaining its colour and gloss.
It is applied to suitably prepared concrete substrates, cementitious surfaces and compatible waterproofing systems, as well as to fountains and other water features. Mix before application. Two coats are recommended on new surfaces. Fill with water only after the coating has fully cured, approximately 7 days at 23 °C.
- Type: Two-component polyurethane
- Form: Liquid coating
- Colour: Grey
- Quantity: 10 kg
- Suitable surfaces: Swimming pools, water tanks, fountains and other water features
- Substrates: Concrete, cementitious surfaces and compatible waterproofing systems
- Resistance: Water, ultraviolet radiation and pool chemicals
- Finish: Satin
- Coverage: Approximately 0.15–0.20 L/m² per coat
- Recommended coats: 2 on new surfaces
- Application method: Brush, roller or airless spray gun
- Thinning: Ready to use after mixing; dilute sparingly with the recommended thinner if required
- Touch-dry: Approximately 4–6 hours at 23 °C
- Recoating: Approximately 12–24 hours
- Full cure: Approximately 7 days at 23 °C
- Tool cleaning: Clean immediately after use with a suitable thinner for polyurethane systems
Product Details
- Type
- Lubricating Liquid
- Colour
- Grey
- Application Surface
- Swimming pool
Additional Specifications
- Polyurethane
- Yes
- Elastomer
- No
- Acrylic
- No
- Bituminous
- No
- Cementitious
- No
- 2-Component
- Yes
Packaging
- Quantity
- 10 kg
Important information
Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.