Maris Polymers Maripool protective pool paint creates a thin coating for swimming pools, water tanks, fountains, ponds and water channels. It is a single-component product that resists water, cleaning chemicals, ultraviolet radiation, weathering and abrasion. Its surface has a satin finish, retains its colour and does not absorb water after application.
Apply to suitably prepared mineral substrates, such as concrete and cement screed, using a brush, roller or airless spray gun. Two to three coats are recommended for full coverage. At 23°C, it is touch-dry in approximately 1–2 hours. Allow 5–7 days for full curing before filling with water.
- Type: Single-component, solvent-based protective pool paint
- Quantity: 1 kg
- Colour: White
- Finish: Satin
- Resistance: Water, cleaning chemicals, ultraviolet radiation, weathering and abrasion
- Suitable surfaces: Cement-based surfaces, concrete, cement screed and other mineral substrates
- Application method: Brush, roller or airless spray gun
- Coverage: Approximately 150 g/m² per coat
- Recommended coats: 2–3
- Dilution: Ready to use; if required, dilute by up to 5–10% with a suitable thinner from the same product range
- Touch-dry time: Approximately 1–2 hours at 23°C
- Recoat time: 6–12 hours
- Full curing: 5–7 days at 23°C before filling with water
- Tool cleaning: Clean with tool-cleaning thinner immediately after use, then wash with water and soap
Product Details
- Type
- -
- Colour
- White
- Application Surface Material
- Cementitious
Additional Specifications
- Polyurethane
- No
- Elastomer
- No
- Acrylic
- No
- Bituminous
- No
- Cementitious
- No
- 2-Component
- No
Packaging
- Quantity
- 1 kg
Important information
Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.