Maris Polymers Maripool waterproofing is a one-component protective pool paint, suitable for swimming pools and water tanks. The coating is resistant to water, pool chemicals, ultraviolet radiation, weathering and abrasion. Once applied and fully cured, it does not absorb water.
Apply to suitably prepared concrete, cement screed and other mineral substrates using a brush, roller or airless spray gun. It is ready to use and, if needed, can be thinned by up to 5–10% with a suitable thinner from the same product range. For full coverage, 2–3 coats are recommended. The pool can be filled with water after 5–7 days at 23°C.
- Quantity: 1 kg
- Colour: Blue
- Type: One-component, solvent-based protective pool paint
- Application surface material: Cement-based
- Application surfaces: Concrete, cement screed and other mineral substrates
- Uses: Swimming pools, water tanks, fountains, ponds and water channels
- Resistance: Water, pool chemicals and cleaning agents, ultraviolet radiation, weathering and abrasion
- Finish: Satin
- Application: Brush, roller or airless spray gun
- Thinning: Ready to use; thin by up to 5–10% with a suitable thinner from the same product range, if required
- Coverage: Approximately 150 g/m² per coat
- Recommended coats: 2–3
- Touch dry: Approximately 1–2 hours at 23°C
- Recoat time: 6–12 hours
- Fill with water: After 5–7 days at 23°C
- Tool cleaning: Clean with tool-cleaning thinner immediately after use
Product Details
- Type
- -
- Colour
- Blue
- Application Surface Material
- Cementitious
Additional Specifications
- Polyurethane
- No
- Elastomer
- No
- Acrylic
- No
- Bituminous
- No
- Cementitious
- No
- 2-Component
- No
Packaging
- Quantity
- 1 kg
Important information
Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.