The Maris Polymers Maripool sealant is a single-component, solvent-based protective pool paint for properly prepared interior and exterior surfaces. It protects against water, cleaning chemicals and ultraviolet radiation, and is resistant to abrasion and weathering. Once applied, it forms a non-absorbent surface with a satin finish and lasting colour.
Suitable for concrete, cement mortar and other mineral substrates, such as swimming pools, water tanks, fountains, ponds and channels. For complete coverage, 2–3 coats are recommended, depending on the surface’s absorbency. The pool can be filled with water once the coating has fully cured.
- Quantity: 1 kg
- Colour: Light blue
- Components: 1
- Base: Solvent-based
- Application surface material: Cement-based
- Resistance: Water, cleaning chemicals, ultraviolet radiation, abrasion and weathering
- Finish: Satin
- Application methods: Brush, roller or airless spray gun
- Thinning: Ready to use; dilute by up to 5–10% with a suitable thinner from the same product range, if required
- Coverage: Approximately 150 g/m² per coat
- Recommended coats: 2–3
- Touch dry: Approximately 1–2 hours at 23 °C
- Recoating: After 6–12 hours
- Full cure: 5–7 days at 23 °C before filling with water
- Tool cleaning: Clean with tool cleaner immediately after use
Product Details
- Type
- -
- Colour
- Light Blue
- Application Surface Material
- Cementitious
Additional Specifications
- Polyurethane
- No
- Elastomer
- No
- Acrylic
- No
- Bituminous
- No
- Cementitious
- No
- 2-Component
- No
Packaging
- Quantity
- 1 kg
Important information
Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.