The colored aliphatic polyurethane two-component paint is designed as a final protective coating for swimming pools and tanks. It exhibits high resistance to continuous water contact, ultraviolet radiation, and pool treatment chemicals. It creates a durable, hard film with excellent color retention and gloss, suitable for interior and exterior applications in demanding environments.

It requires mixing the two components according to the Technical Data Sheet and applying two coats on new surfaces for optimal performance.

• Two-component aliphatic polyurethane composition
• High resistance to UV radiation without chalking
• Excellent color and gloss retention
• Durability in permanent water contact
• Resistance to pool chemicals and cleaning agents
• Hard and durable film with high mechanical strength
• Suitable for interior and exterior applications

Application surfaces: Concrete, cementitious substrates, and compatible waterproofing systems, properly prepared, clean, sound, and dry. Applied as a final protective paint.

Application is done by brush, roller, or airless spray gun. Approximately 0.15 – 0.20 L/m² per coat is required (≈ 5 – 7 m²/L per coat), depending on the roughness and absorbency of the substrate. Note that two coats are required on new surfaces.

It is recommended to clean tools immediately after use with a suitable polyurethane system solvent, while hardened residues are removed mechanically. The drying time at 23°C is approximately 4 – 6 hours to touch and 7 days for full curing before water filling.

Available in selected ready-made shades and in thousands of shades through the official coloring system of Sika company.