Techstar – Anti-theft Alarm Protection for Motorcycles/Scooters 12V with remote control, powerful siren, vibration sensor, IP55 protection, 700mAh battery, and USB-C charging.

Security system for motorcycles and scooters, designed to prevent theft with remote locking/unlocking functions, vibration alarm, and audible/visual signaling. Operates at 12V voltage, features adjustable sensitivity with 7 levels, and the unit is waterproof (IP55). Includes a rechargeable 700mAh battery with USB-C charging, with a declared autonomous operation of up to 1–3 months in use and up to 6 months on standby (depending on activation frequency and conditions).

Main Functions (Remote Control):

• Lock: activates the anti-theft protection function.
• Unlock: deactivates the alarm.
• Find Vehicle: activates an audible signal to locate the motorcycle.
• Tone/Emergency Selection: signaling e.g. flashing turn signals.

Activation Behavior (Anti-theft Vibrator): After activation, the system enters anti-theft protection mode after a short delay. Upon vibration detection, it may initially emit a warning. If vibrations continue or repeat, it activates a full alarm (siren + flash).

Adjustable Sensitivity (7 Levels): Sensitivity changes via the remote control, confirmed with audible signals. Higher levels increase the likelihood of activation on light vibrations.

Technical Specifications:

• Operating Voltage: 12V
• Operating Current: <150 mA
• Standby Current: <5 mA
• Remote Control Frequency: 315 ±0.5 MHz
• Siren Sound Level: approximately 120–125 dB
• Water Protection: IP55
• Battery: 700 mAh, rechargeable
• Charging: USB-C
• Remote Control Range: up to 20 m / 66 ft
• Remote Control Dimensions: approx. 6.5 cm (L) x 3.5 cm (W) x 1.5 cm (H)

Installation: Installation by a person experienced with motorcycle electrical systems (12V) is recommended. The antenna (green wire) should be placed as straight as possible, away from metals, for better range. The siren must be mounted so that it does not collect water.

Package Contents:

• 1 x central unit (control unit) with wiring
• 1 x siren
• 2 x remote controls
• 1 x wiring/connections
• 1 x double-sided adhesive sticker
• 1 x user manual / wiring diagram

Common Warnings:

• Do not operate the remote control while driving.
• Respect polarity at 12V; protect the connections.
• The siren is very loud; avoid testing near the ear.
• Do not expose directly to strong water flows.