Specifications and installation instructions:

• Contents: 5 meters of perforated stainless steel tape 304, 10 screw head clamps (screw positions)
• Tape width: approximately 12.5 mm
• Thickness: approximately 0.6 mm
• Clamp head size: approximately 45 x 16 mm
• Use: plastic/metal pipes/air, temporary or permanent fasteners.

Installation instructions:

1. Pass the tape through the first hole of the clamp head.
2. Bend the free end of the tape at ~75-90° (facilitates locking).
3. Pass the bent end under the second guide of the clamp.
4. Straighten the bend with pliers to fit perfectly into the groove.
5. Wrap the tape around the part, mark and cut the required length, and insert the end into the clamp.
6. Tighten the clamp screw with a screwdriver/bit (do not overtighten).

Notes:

• The edges of the tape may be sharp – wear gloves.
• Do not exceed the recommended tightening torque to avoid deforming the pipe.

Set of clamps suitable for DIY with perforated tape 5 m + 10 stainless steel clamps 304.

The Onuvio set allows you to quickly create clamps of any diameter for pipes. The stainless steel 304 perforated tape is designed for tightening with screws, and the clamp heads can be installed in seconds. An ideal solution for automotive, HVAC, irrigation, installations, and household/industrial use where standard sizes do not fit.

Advantages:

• One set, any diameter – cut exactly what you need.
• Corrosion resistance from stainless steel 304 for outdoor and moist environments.
• Secure fastening with a screw-type sleeve mechanism for gradual and safe tightening.
• Cost savings by reusing leftover tape? Simply replace the worn section.
• Versatile for automotive (intake/radiator pipes), ventilation/HVAC, irrigation, marine use, cable/pipe fastening.