Computer Cases

C365 Gaming Midi Tower Computer Case with Side Window White

With two tempered glass panels and a frameless design, the Darkflash C365 PC case offers a 270° panoramic view of its components. It supports E-ATX, ATX, M-ATX and ITX motherboards, graphics cards up...

With two tempered glass panels and a frameless design, the Darkflash C365 PC case offers a 270° panoramic view of its components. It supports E-ATX, ATX, M-ATX and ITX motherboards, graphics cards up to 330 mm long, and CPU coolers up to 170 mm tall. The ventilation grilles form an airflow channel to dissipate heat.

Up to 7 fans or a 240 mm liquid-cooling...

See full description See full description

Top specs

  • See all
34 22 €
Delivery Mon, 30 Nov - Fri, 04 Dec
44,00 €   shipping cost
Sent from Greece
From Techstores 4.8 (96)
Greece
2 pieces
See Computer Hardware on the page of Techstores

Learn more about invoicing

Description

Description

With two tempered glass panels and a frameless design, the Darkflash C365 PC case offers a 270° panoramic view of its components. It supports E-ATX, ATX, M-ATX and ITX motherboards, graphics cards up to 330 mm long, and CPU coolers up to 170 mm tall. The ventilation grilles form an airflow channel to dissipate heat.

Up to 7 fans or a 240 mm liquid-cooling radiator can be installed at the top, with a maximum memory module height of 46 mm. The top panel supports two 120 mm or 140 mm fans, while the side, rear and bottom mounts support two 120 mm fans, one 120 mm fan and two 120 mm fans, respectively. The case has seven expansion slots and mounts for one SSD and two HDDs.

  • Type: Midi Tower
  • Color: White
  • Material: 0.55 mm SPCC
  • Side panel: Two tempered glass panels
  • Compatible motherboards: E-ATX, ATX, M-ATX, ITX
  • Dimensions: 375 x 220 x 445 mm (height x width x depth)
  • Maximum graphics card length: 330 mm
  • Maximum CPU cooler height: 170 mm
  • Drive bays: 1 x 2.5" SSD, 2 x 3.5" HDD
  • Expansion slots: 7
  • Fan mounts: Top: 2 x 120 mm or 2 x 140 mm; side: 2 x 120 mm; rear: 1 x 120 mm; bottom: 2 x 120 mm
  • Maximum number of fans: 7
  • Pre-installed fans: None
  • Radiator location: Top
  • Maximum radiator size: 240 mm
  • Maximum memory module height: 46 mm
  • Power supply standard: ATX
  • Maximum power supply length: 160 mm
  • Ports and connectors: 1 x USB-A 3.0, 2 x USB-A 2.0, HD Audio
  • Buttons: Power, reset
  • Weight: Approx. 4.6 kg

Manufacturer

See full description

Specifications

Specifications

Main Specifications

Colour
White
Size
Midi Tower
Compatible Motherboard Type
ATX, Extended ATX, ITX, Micro ATX

Dimensions

Height
375 mm
Width
220 mm
Length
445 mm

Internal Spaces

Maximum Graphics Card Length
330 mm
Maximum Processor Heatsink Height
170 mm

Drive Bays

Internal Hub 3.5"
2
Internal Hub 2.5"
1

Fan Positions

Rear
1
Side
2
Top Positions
2

Water Cooling

Radiator Position
Top

Specifications

Connectivity
Audio, USB 2.0, USB 3.0
Extras
Side Window
Gaming
Yes
Airflow
No
Home & Office
No

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

See all specifications

Reviews (2)

Reviews

  1. 2
  2. 4 stars
    0
  3. 3 stars
    0
  4. 2 stars
    0
  5. 1 star
    0
Review this product
  • For the money, it’s perfectly fine; extra fans can also be installed at the bottom. Nice case.

    Translated from Greek ·
    Did you find this review helpful?
  • This review is about a variation of the product

    I wonder how come nobody has reviewed it yet.
    It is a pretty nice case with good build quality, although it has 2 flaws. The first one is also visible in the photo: when the glass panels meet at the corner, they don’t fit together completely; there’s a small gap. And the second is that, for some reason, Darkflash seems to think someone will have more magnetic hard drives than SSDs. It’s not a big deal, because nowadays many people don’t just neglect them but completely ignore magnetic drives, as if they don’t exist...

    The version with 5 fans (don’t look at the photos and assume it comes with everything; two are missing) is worth the little extra money for obvious reasons, plus the fans are decent. The only bad thing is that they aren’t 3/4-pin PWM, so you can’t control them even via power from the motherboard... which means they all run together directly from the SATA power cable. But the ARGB also worked in series with a 4-pin connector that connects them, and it has a safety feature, which means it won’t come loose from its position. So that little extra is worth it, provided you also get 2 more fans so it’s fully equipped. The 4 fans are reverse-blade to show off the mirror effect on the blades, which means only one goes in as an exhaust and the others as intake.

    Also, if you install a micro-ATX motherboard, the two side panels need to go in the top section of the case; they’ll fit, but only just... If we’re talking E-ATX, it’ll fill the whole case...

    Also, the bottom section with the USB ports comes off with a screw, which helps with cable management and is perhaps a nice custom touch for something so affordable.

    Translated from Greek ·
    Did you find this review helpful?
  • For the money, it’s perfectly fine; extra fans can also be installed at the bottom. Nice case.

    Translated from Greek ·
    0
  • I wonder how come nobody has reviewed it yet.
    It is a pretty nice case with good build quality, although it has 2 flaws. The first one is also visible in the photo: when the glass panels meet at the corner, they don’t fit together completely; there’s a small gap. And the second is that, for some reason, Darkflash seems to think someone will have more magnetic hard drives than SSDs. It’s not a big deal, because nowadays many people don’t just neglect them but completely ignore magnetic drives, as if they don’t exist...

    The version with 5 fans (don’t look at the photos and assume it comes with everything; two are missing) is worth the little extra money for obvious reasons, plus the fans are decent. The only bad thing is that they aren’t 3/4-pin PWM, so you can’t control them even via power from the motherboard... which means they all run together directly from the SATA power cable. But the ARGB also worked in series with a 4-pin connector that connects them, and it has a safety feature, which means it won’t come loose from its position. So that little extra is worth it, provided you also get 2 more fans so it’s fully equipped. The 4 fans are reverse-blade to show off the mirror effect on the blades, which means only one goes in as an exhaust and the others as intake.

    Also, if you install a micro-ATX motherboard, the two side panels need to go in the top section of the case; they’ll fit, but only just... If we’re talking E-ATX, it’ll fill the whole case...

    Also, the bottom section with the USB ports comes off with a screw, which helps with cable management and is perhaps a nice custom touch for something so affordable.

    Translated from Greek ·
    0
  • See all

Description & Specifications

Main Specifications

Colour
White
Size
Midi Tower
Compatible Motherboard Type
ATX, Extended ATX, ITX, Micro ATX

Dimensions

Height
375 mm
Width
220 mm
Length
445 mm

Internal Spaces

Maximum Graphics Card Length
330 mm
Maximum Processor Heatsink Height
170 mm

Drive Bays

Internal Hub 3.5"
2
Internal Hub 2.5"
1

Fan Positions

Rear
1
Side
2
Top Positions
2

Water Cooling

Radiator Position
Top

Specifications

Connectivity
Audio, USB 2.0, USB 3.0
Extras
Side Window
Gaming
Yes
Airflow
No
Home & Office
No

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

Description

With two tempered glass panels and a frameless design, the Darkflash C365 PC case offers a 270° panoramic view of its components. It supports E-ATX, ATX, M-ATX and ITX motherboards, graphics cards up to 330 mm long, and CPU coolers up to 170 mm tall. The ventilation grilles form an airflow channel to dissipate heat.

Up to 7 fans or a 240 mm liquid-cooling radiator can be installed at the top, with a maximum memory module height of 46 mm. The top panel supports two 120 mm or 140 mm fans, while the side, rear and bottom mounts support two 120 mm fans, one 120 mm fan and two 120 mm fans, respectively. The case has seven expansion slots and mounts for one SSD and two HDDs.

  • Type: Midi Tower
  • Color: White
  • Material: 0.55 mm SPCC
  • Side panel: Two tempered glass panels
  • Compatible motherboards: E-ATX, ATX, M-ATX, ITX
  • Dimensions: 375 x 220 x 445 mm (height x width x depth)
  • Maximum graphics card length: 330 mm
  • Maximum CPU cooler height: 170 mm
  • Drive bays: 1 x 2.5" SSD, 2 x 3.5" HDD
  • Expansion slots: 7
  • Fan mounts: Top: 2 x 120 mm or 2 x 140 mm; side: 2 x 120 mm; rear: 1 x 120 mm; bottom: 2 x 120 mm
  • Maximum number of fans: 7
  • Pre-installed fans: None
  • Radiator location: Top
  • Maximum radiator size: 240 mm
  • Maximum memory module height: 46 mm
  • Power supply standard: ATX
  • Maximum power supply length: 160 mm
  • Ports and connectors: 1 x USB-A 3.0, 2 x USB-A 2.0, HD Audio
  • Buttons: Power, reset
  • Weight: Approx. 4.6 kg

Manufacturer

Reviews (2)

  1. 2
  2. 4 stars
    0
  3. 3 stars
    0
  4. 2 stars
    0
  5. 1 star
    0
Review this product
  • For the money, it’s perfectly fine; extra fans can also be installed at the bottom. Nice case.

    Translated from Greek ·
    Did you find this review helpful?
  • This review is about a variation of the product

    I wonder how come nobody has reviewed it yet.
    It is a pretty nice case with good build quality, although it has 2 flaws. The first one is also visible in the photo: when the glass panels meet at the corner, they don’t fit together completely; there’s a small gap. And the second is that, for some reason, Darkflash seems to think someone will have more magnetic hard drives than SSDs. It’s not a big deal, because nowadays many people don’t just neglect them but completely ignore magnetic drives, as if they don’t exist...

    The version with 5 fans (don’t look at the photos and assume it comes with everything; two are missing) is worth the little extra money for obvious reasons, plus the fans are decent. The only bad thing is that they aren’t 3/4-pin PWM, so you can’t control them even via power from the motherboard... which means they all run together directly from the SATA power cable. But the ARGB also worked in series with a 4-pin connector that connects them, and it has a safety feature, which means it won’t come loose from its position. So that little extra is worth it, provided you also get 2 more fans so it’s fully equipped. The 4 fans are reverse-blade to show off the mirror effect on the blades, which means only one goes in as an exhaust and the others as intake.

    Also, if you install a micro-ATX motherboard, the two side panels need to go in the top section of the case; they’ll fit, but only just... If we’re talking E-ATX, it’ll fill the whole case...

    Also, the bottom section with the USB ports comes off with a screw, which helps with cable management and is perhaps a nice custom touch for something so affordable.

    Translated from Greek ·
    Did you find this review helpful?
  • For the money, it’s perfectly fine; extra fans can also be installed at the bottom. Nice case.

    Translated from Greek ·
    0
  • I wonder how come nobody has reviewed it yet.
    It is a pretty nice case with good build quality, although it has 2 flaws. The first one is also visible in the photo: when the glass panels meet at the corner, they don’t fit together completely; there’s a small gap. And the second is that, for some reason, Darkflash seems to think someone will have more magnetic hard drives than SSDs. It’s not a big deal, because nowadays many people don’t just neglect them but completely ignore magnetic drives, as if they don’t exist...

    The version with 5 fans (don’t look at the photos and assume it comes with everything; two are missing) is worth the little extra money for obvious reasons, plus the fans are decent. The only bad thing is that they aren’t 3/4-pin PWM, so you can’t control them even via power from the motherboard... which means they all run together directly from the SATA power cable. But the ARGB also worked in series with a 4-pin connector that connects them, and it has a safety feature, which means it won’t come loose from its position. So that little extra is worth it, provided you also get 2 more fans so it’s fully equipped. The 4 fans are reverse-blade to show off the mirror effect on the blades, which means only one goes in as an exhaust and the others as intake.

    Also, if you install a micro-ATX motherboard, the two side panels need to go in the top section of the case; they’ll fit, but only just... If we’re talking E-ATX, it’ll fill the whole case...

    Also, the bottom section with the USB ports comes off with a screw, which helps with cable management and is perhaps a nice custom touch for something so affordable.

    Translated from Greek ·
    0
  • See all
34,22 €
44,00 €   shipping cost