Skroutz.mt

Dali Sonik On-Wall Pair of Hi-Fi Wall Speakers 100W 2-Way Natural Oak
Passive Hi-Fi speakers

Dali Sonik On-Wall Pair of Hi-Fi Wall Speakers 100W 2-Way Natural Oak

The SONIK ON-WALL offers rich, immersive sound from a slim, discreet design. The 29 mm soft tweeter and 5 inch woofer made from SMC wood fibers and Clarity Cone fill the space with detailed sound,...

The SONIK ON-WALL offers rich, immersive sound from a slim, discreet design. The 29 mm soft tweeter and 5 inch woofer made from SMC wood fibers and Clarity Cone fill the space with detailed sound, while the bass port delivers deep lows, ideal for stereo or surround systems.

Features:

  • Frequency Range [+/- 3 dB] [Hz]: 55 – 26,000
  • Sensitivity [2.83V/1m] [dB]:...
See full description See full description
The product is not available for shipping to the selected country.
Review the product
Product report

Description

Description

The SONIK ON-WALL offers rich, immersive sound from a slim, discreet design. The 29 mm soft tweeter and 5¼ inch woofer made from SMC wood fibers and Clarity Cone fill the space with detailed sound, while the bass port delivers deep lows, ideal for stereo or surround systems.

Features:

  • Frequency Range [+/- 3 dB] [Hz]: 55 – 26,000
  • Sensitivity [2.83V/1m] [dB]: 87
  • Nominal Impedance [ohms]: 6
  • Maximum SPL [@ 1m] [dB]: 107
  • Crossover Frequencies [Hz]: 2,400
  • Crossover Principle: 2-way
  • Recommended Amp. Power [watts]: 25 – 100
  • High Frequency Driver(s): 1 x 29 mm low loss soft dome
  • Low/Mid Frequency Driver(s): 1 x 5¼ inch

Manufacturer

Manufacturer Details

Warnings & Safety Information
See full description

Specifications

Specifications

Power
100 W

Power

Power is expressed in watts and describes the actual intensity that can be heard from the speaker. Your number indicates the maximum power that the speaker can handle for an extended period of time.
Freequency Range
55 - 26000 Hz

Freequency Range

The frequency response indicates the range of tones that a speaker can produce. The lower number indicates how low the speaker can play and how deep its bass goes. The higher number indicates the upper limit of the speaker's tonal range (high frequencies).
Nominal Impendance
6 ohm

Nominal Impendance

The Ohm resistance describes the amount of electrical resistance that an amplifier reads, that is, the amount of current that can "pass" through the speaker.
Driver Configuration
2 No of Drivers

Driver Configuration

2

This is a 2-way speaker where frequencies are shared between the tweeter and woofer. That is, the sound frequencies are reproduced by two speakers, a tweeter for the highs and a woofer for the lows.
Placing
Wall Mounted
Bass Driver
5.25 "
Dolby Atmos
No
Quantity
Pair
Colour
Beige

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

See all specifications

Description & Specifications

The SONIK ON-WALL offers rich, immersive sound from a slim, discreet design. The 29 mm soft tweeter and 5¼ inch woofer made from SMC wood fibers and Clarity Cone fill the space with detailed sound, while the bass port delivers deep lows, ideal for stereo or surround systems.

Features:

  • Frequency Range [+/- 3 dB] [Hz]: 55 – 26,000
  • Sensitivity [2.83V/1m] [dB]: 87
  • Nominal Impedance [ohms]: 6
  • Maximum SPL [@ 1m] [dB]: 107
  • Crossover Frequencies [Hz]: 2,400
  • Crossover Principle: 2-way
  • Recommended Amp. Power [watts]: 25 – 100
  • High Frequency Driver(s): 1 x 29 mm low loss soft dome
  • Low/Mid Frequency Driver(s): 1 x 5¼ inch

Manufacturer

Manufacturer Details

Warnings & Safety Information
Power
100 W

Power

Power is expressed in watts and describes the actual intensity that can be heard from the speaker. Your number indicates the maximum power that the speaker can handle for an extended period of time.
Freequency Range
55 - 26000 Hz

Freequency Range

The frequency response indicates the range of tones that a speaker can produce. The lower number indicates how low the speaker can play and how deep its bass goes. The higher number indicates the upper limit of the speaker's tonal range (high frequencies).
Nominal Impendance
6 ohm

Nominal Impendance

The Ohm resistance describes the amount of electrical resistance that an amplifier reads, that is, the amount of current that can "pass" through the speaker.
Driver Configuration
2 No of Drivers

Driver Configuration

2

This is a 2-way speaker where frequencies are shared between the tweeter and woofer. That is, the sound frequencies are reproduced by two speakers, a tweeter for the highs and a woofer for the lows.
Placing
Wall Mounted
Bass Driver
5.25 "
Dolby Atmos
No
Quantity
Pair
Colour
Beige

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.