Skroutz.mt

Eurolamp Intermediate Switch 6A
Intermediate Switches

Eurolamp Intermediate Switch 6A Code: 850-10045

The Eurolamp 850-10045 intermediate switch is used to control lighting. It has a maximum load of 6 A, operates at 220–240 V, and has an IP20 protection rating.

  • Use: Lighting
  • Maximum load: 6 A
  • ...

The Eurolamp 850-10045 intermediate switch is used to control lighting. It has a maximum load of 6 A, operates at 220–240 V, and has an IP20 protection rating.

  • Use: Lighting
  • Maximum load: 6 A
  • Operating voltage: 220–240 V
  • Protection rating: IP20
  • Quantity: 1
See full description See full description

Top specs

  • Usage

    Lighting

    For remote control of lamps and lighting fixtures.

  • Maximum Load

    It is the maximum amount of current that the switch can withstand without burning out. It shows you how many or how powerful devices you can connect: for simple lights, 10A is enough, while for power-hungry devices (such as a water heater) more Amperes are required.

    For example, a typical LED bulb (e.g. 10W) draws very little current, about 0.04 Amperes. This means that a standard smart switch of 10A is more than sufficient for its operation.
  • See all
The product is not available for shipping to the selected country.
Review the product
Product report

Description

Description

The Eurolamp 850-10045 intermediate switch is used to control lighting. It has a maximum load of 6 A, operates at 220–240 V, and has an IP20 protection rating.

  • Use: Lighting
  • Maximum load: 6 A
  • Operating voltage: 220–240 V
  • Protection rating: IP20
  • Quantity: 1

Manufacturer

Manufacturer Details

Warnings & Safety Information
See full description

Specifications

Specifications

Product Number
850-10045

Specifications

Switch Type
Basic
Usage
Lighting

Usage

Lighting

For remote control of lamps and lighting fixtures.

Additional Features

With Remote Control
No

With Remote Control

It allows you to control the switch remotely with a remote control, without needing your smartphone.
Maximum Load
6 A

Maximum Load

It is the maximum amount of current that the switch can withstand without burning out. It shows you how many or how powerful devices you can connect: for simple lights, 10A is enough, while for power-hungry devices (such as a water heater) more Amperes are required.

For example, a typical LED bulb (e.g. 10W) draws very little current, about 0.04 Amperes. This means that a standard smart switch of 10A is more than sufficient for its operation.
Wiring
-
Pieces
1

Features

Dimmer
No

Dimmer

It allows you to adjust the brightness of the lighting instead of simple on/off operation. Bulbs that support dimmable function are required.
Dry Contact
No

Dry Contact

Dry Contact. It gives you the ability to safely control devices that have their own power supply. It does not transfer current but allows you to control them remotely, without causing a short circuit or damage.
Consumption Measurement
No

Consumption Measurement

It allows you to see in real time how much electricity your connected device is consuming and to keep a usage history, through your smartphone and the compatible app.

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

See all specifications

Description & Specifications

The Eurolamp 850-10045 intermediate switch is used to control lighting. It has a maximum load of 6 A, operates at 220–240 V, and has an IP20 protection rating.

  • Use: Lighting
  • Maximum load: 6 A
  • Operating voltage: 220–240 V
  • Protection rating: IP20
  • Quantity: 1

Manufacturer

Manufacturer Details

Warnings & Safety Information
Product Number
850-10045

Specifications

Switch Type
Basic
Usage
Lighting

Usage

Lighting

For remote control of lamps and lighting fixtures.

Additional Features

With Remote Control
No

With Remote Control

It allows you to control the switch remotely with a remote control, without needing your smartphone.
Maximum Load
6 A

Maximum Load

It is the maximum amount of current that the switch can withstand without burning out. It shows you how many or how powerful devices you can connect: for simple lights, 10A is enough, while for power-hungry devices (such as a water heater) more Amperes are required.

For example, a typical LED bulb (e.g. 10W) draws very little current, about 0.04 Amperes. This means that a standard smart switch of 10A is more than sufficient for its operation.
Wiring
-
Pieces
1

Features

Dimmer
No

Dimmer

It allows you to adjust the brightness of the lighting instead of simple on/off operation. Bulbs that support dimmable function are required.
Dry Contact
No

Dry Contact

Dry Contact. It gives you the ability to safely control devices that have their own power supply. It does not transfer current but allows you to control them remotely, without causing a short circuit or damage.
Consumption Measurement
No

Consumption Measurement

It allows you to see in real time how much electricity your connected device is consuming and to keep a usage history, through your smartphone and the compatible app.

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.