Skroutz.mt

Sunlu PLA 3D Printer Filament 1.75mm Red 1kg
3D Printer Filament

Sunlu PLA 3D Printer Filament 1.75mm Red 1kg

Sunlu PLA filament produces 3D prints with a look and texture reminiscent of marble, thanks to its stone-like particles. Designed for high-speed printing from 50 to 600 mm/s, it can be used for...

Sunlu PLA filament produces 3D prints with a look and texture reminiscent of marble, thanks to its stone-like particles. Designed for high-speed printing from 50 to 600 mm/s, it can be used for architectural models, sculptures, and artistic creations. It is compatible with most FDM 3D printers.

  • Material: PLA
  • Color: Red
  • Diameter: 1.75 mm
  • Weight: 1 kg
  • ...
See full description See full description

Top specs

  • Material

    PLA

    Easy-to-use material, environmentally friendly as it is produced from renewable sources. It is ideal for beginners due to its low printing temperature and minimal shrinkage.
  • Weight 1 kg
  • Diameter 1.75 mm
  • See all
16 70 €
Delivery by Tue, 10 Nov
14,00 €   shipping cost
Sent from Greece
From Ichip 4.9 (32)
4.9 (32 reviews)
Greece
2 pieces
See Printer Supplies on the page of Ichip

Shop selection criteria

Why do we recommend buying from this shop?

We don’t only look at the price. We weigh different factors to find an offer that combines a good price, fast delivery and a reliable purchase.

  • Product price

    We calculate the total price you will pay and any discounts available from the shop.

  • Shipping & delivery time

    We check how quickly the product can be shipped and when you will receive it, based on your address.

  • Shop reliability

    We look at how often shops complete their orders successfully and how consistently they serve their customers.

  • Official reseller

    Where available, we take into account whether the shop is an official reseller of the brand.

Learn more about invoicing
Review the product
Product report

Description

Description

Sunlu PLA filament produces 3D prints with a look and texture reminiscent of marble, thanks to its stone-like particles. Designed for high-speed printing from 50 to 600 mm/s, it can be used for architectural models, sculptures, and artistic creations. It is compatible with most FDM 3D printers.

  • Material: PLA
  • Color: Red
  • Diameter: 1.75 mm
  • Weight: 1 kg
  • Packaging: Spool
  • Printing speed: 50–600 mm/s
  • Infill speed: Up to 450 mm/s
  • Thin-wall printing speed: Up to 600 mm/s
  • Dimensional accuracy: ±0.02 mm
  • Density: 1.25 g/cm³
  • Vicat softening temperature: 54 °C
  • Heat deflection temperature: 54.8 °C
  • Melting temperature: 164 °C
  • Melt flow rate: 10.7 g/10 min
  • Tensile strength: 41 MPa
  • Elongation at break: 80%
  • Flexural strength: 70 MPa
  • Elastic modulus: 3400 MPa
  • Impact strength (X-Y): 11 kJ/m²
  • Compatibility: Bambu Lab, Creality, Prusa, Anycubic

Manufacturer

Manufacturer Details

Warnings & Safety Information
See full description

Specifications

Specifications

Material
PLA

Material

PLA

Easy-to-use material, environmentally friendly as it is produced from renewable sources. It is ideal for beginners due to its low printing temperature and minimal shrinkage.
Colour
Red
Diameter
1.75 mm
Weight
1 kg
Filament Packaging
Spool

Filament Packaging

Spool
The filament comes wound on a spool. Ready to use without additional accessories.
Quantity
-

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

See all specifications

Description & Specifications

Sunlu PLA filament produces 3D prints with a look and texture reminiscent of marble, thanks to its stone-like particles. Designed for high-speed printing from 50 to 600 mm/s, it can be used for architectural models, sculptures, and artistic creations. It is compatible with most FDM 3D printers.

  • Material: PLA
  • Color: Red
  • Diameter: 1.75 mm
  • Weight: 1 kg
  • Packaging: Spool
  • Printing speed: 50–600 mm/s
  • Infill speed: Up to 450 mm/s
  • Thin-wall printing speed: Up to 600 mm/s
  • Dimensional accuracy: ±0.02 mm
  • Density: 1.25 g/cm³
  • Vicat softening temperature: 54 °C
  • Heat deflection temperature: 54.8 °C
  • Melting temperature: 164 °C
  • Melt flow rate: 10.7 g/10 min
  • Tensile strength: 41 MPa
  • Elongation at break: 80%
  • Flexural strength: 70 MPa
  • Elastic modulus: 3400 MPa
  • Impact strength (X-Y): 11 kJ/m²
  • Compatibility: Bambu Lab, Creality, Prusa, Anycubic

Manufacturer

Manufacturer Details

Warnings & Safety Information
Material
PLA

Material

PLA

Easy-to-use material, environmentally friendly as it is produced from renewable sources. It is ideal for beginners due to its low printing temperature and minimal shrinkage.
Colour
Red
Diameter
1.75 mm
Weight
1 kg
Filament Packaging
Spool

Filament Packaging

Spool
The filament comes wound on a spool. Ready to use without additional accessories.
Quantity
-

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

16,70 €
14,00 €   shipping cost