Sunlu PLA+ Filament (Cherry)

The Sunlu PLA+ filament is ideal for 3D prints that require a premium aesthetic finish and high strength. It features excellent mechanical properties, with impact resistance up to 8 kJ/m², offering greater durability compared to standard PLA filaments.

Features:

• Diameter: 1.75 mm
• High dimensional accuracy: ±0.02 mm
• Low shrinkage and good interlayer adhesion
• Design minimizes printing issues such as nozzle clogging and air bubbles

The careful winding of the filament reduces the risk of knots and tangles, ensuring greater ease of use. It is compatible with nearly all 3D FDM printers that support 1.75 mm filament. The recommended printing speed is 50–100 mm/s at 195–205 °C or 100–300 mm/s at 205–220 °C.

Technical specifications:

• Manufacturer: Sunlu
• Model: PLA+ CR
• Density: 1.23 g/cm³
• Vicat softening temperature: 54 °C
• Heat deflection temperature (HDT): 53 °C
• Melting temperature: 164 °C
• Melt flow rate: 6.3 g/10 min
• Tensile strength: 64 MPa
• Elongation at break: 17 %
• Flexural strength: 86 MPa
• Elastic modulus: 2907 MPa
• IZOD impact resistance (X-Y): 3.5 kJ/m²