Sunlu PLA+ filament in chocolate is designed for 3D printing, with an impact strength of up to 8 kJ/m². It has low shrinkage and good interlayer adhesion, while its consistent diameter helps ensure smooth feeding and reliable printing. The filament is neatly wound on the spool to reduce the risk of knots and tangles during unwinding.

Printing is recommended at a speed of 50–100 mm/s and a temperature of 195–205 °C, or at a speed of 100–300 mm/s and a temperature of 205–220 °C. It is compatible with FDM 3D printers that support 1.75 mm filament.

• Material: PLA+
• Color: Chocolate
• Weight: 1 kg
• Diameter: 1.75 mm
• Packaging: Spool
• Density: 1.23 g/cm³
• Vicat softening temperature: 54 °C
• Heat deflection temperature (HDT): 53 °C
• Melting temperature: 164 °C
• Melt flow rate: 6.3 g/10 min
• Tensile strength: 64 MPa
• Elongation at break: 17 %
• Flexural strength: 86 MPa
• Young's modulus: 2907 MPa
• IZOD impact strength (X-Y): 3.5 kJ/m²
• Diameter accuracy: ±0.02 mm
• Recommended printing speed: 50–100 mm/s or 100–300 mm/s
• Recommended printing temperature: 195–205 °C or 205–220 °C
• Compatibility: FDM 3D printers that support 1.75 mm filament