Sunlu PLA+ 3D printing filament in transparent red has a diameter of 1.75 mm and is designed for FDM 3D printers that support this diameter. Dimensional accuracy of ±0.02 mm, low shrinkage, and good interlayer adhesion help ensure smooth feeding and consistent printing. The neatly wound spool reduces the risk of knots and tangles.

The material has a tensile strength of 64 MPa and an IZOD impact strength (X-Y) of 3.5 kJ/m². The recommended printing speed is 50–100 mm/s at 195–205 °C or 100–300 mm/s at 205–220 °C.

• Material: PLA+
• Color: Transparent red
• Filament diameter: 1.75 mm
• Dimensional accuracy: ±0.02 mm
• Packaging: Spool
• Density: 1.23 g/cm³
• Vicat softening temperature: 54 °C
• Heat deflection temperature (HDT): 53 °C
• Melting temperature: 164 °C
• Melt flow rate: 6.3 g/10 min
• Tensile strength: 64 MPa
• Elongation at break: 17%
• Flexural strength: 86 MPa
• Modulus of elasticity: 2907 MPa
• IZOD impact strength (X-Y): 3.5 kJ/m²
• Compatibility: FDM 3D printers that support 1.75 mm filament
• Recommended printing speed and temperature: 50–100 mm/s at 195–205 °C or 100–300 mm/s at 205–220 °C