Sunlu PLA+ Filament

Sunlu PLA+ filament is an excellent choice for 3D prints with an aesthetic result and high durability. It features exceptional mechanical properties, with impact resistance up to 8 kJ/m², which is up to three times better than many standard PLA and PLA+ filaments.

Specifications:

• Diameter: 1.75 mm
• Dimensional accuracy: ±0.02 mm
• Density: 1.23 g/cm³
• Vicat softening temperature: 54 °C
• Heat Deflection Temperature (HDT): 53 °C
• Melting temperature: 164 °C
• Melt flow rate: 6.3 g/10 min
• Tensile strength: 64 MPa
• Elongation at break: 17%
• Flexural strength: 86 MPa
• Modulus of elasticity: 2907 MPa
• IZOD impact strength (X-Y): 3.5 kJ/m²

Its uniform winding reduces the risk of knots and tangles during use, allowing for consistent prints. It is compatible with most FDM printing devices that support 1.75 mm filament, offering great flexibility in adjusting print parameters.