Sunlu PLA+ filament is designed for 3D printing and has an impact strength of up to 8 kJ/m². It has a diameter of 1.75 mm, dimensional accuracy of ±0.02 mm, low shrinkage, and good interlayer adhesion. The even winding on the spool reduces the risk of knots and tangles during unwinding.

It is compatible with FDM 3D printers that support 1.75 mm filament. Recommended print settings are a speed of 50–100 mm/s at a temperature of 195–205 °C, or a speed of 100–300 mm/s at a temperature of 205–220 °C.

• Material: PLA+
• Color: Green
• Weight: 1 kg
• Diameter: 1.75 mm
• Packaging: Spool
• Impact strength: Up to 8 kJ/m²
• Dimensional accuracy: ±0.02 mm
• Density: 1.23 g/cm³
• Vicat softening temperature: 54 °C
• Heat deflection temperature (HDT): 53 °C
• Melting temperature: 164 °C
• Melt flow rate: 6.3 g/10 min
• Tensile strength: 64 MPa
• Elongation at break: 17%
• Flexural strength: 86 MPa
• Young's modulus: 2907 MPa
• IZOD impact strength (X-Y): 3.5 kJ/m²
• Recommended print speed: 50–100 mm/s or 100–300 mm/s
• Recommended printing temperature: 195–205 °C or 205–220 °C
• Compatibility: FDM 3D printers that support 1.75 mm filament, Bambu Lab, Creality, Prusa, and Anycubic