The Sunlu PLA+ filament in orange has an impact strength of up to 8 kJ/m² and good layer adhesion. It has a diameter of 1.75 mm, dimensional accuracy of ±0.02 mm, low shrinkage, and consistent feeding. Its even winding on the spool reduces the risk of knots and tangles during printing.

It is compatible with FDM 3D printers that support 1.75 mm filament. For a printing speed of 50–100 mm/s, the recommended temperature is 195–205 °C, while for 100–300 mm/s, it is 205–220 °C.

• Material: PLA+
• Color: Orange
• Weight: 1 kg
• Diameter: 1.75 mm
• Packaging: Spool
• Dimensional accuracy: ±0.02 mm
• Impact strength: Up to 8 kJ/m²
• Density: 1.23 g/cm³
• Vicat softening temperature: 54 °C
• Heat deflection temperature (HDT): 53 °C
• Melting point: 164 °C
• Melt flow rate: 6.3 g/10 min
• Tensile strength: 64 MPa
• Elongation at break: 17%
• Flexural strength: 86 MPa
• Elastic modulus: 2907 MPa
• Notched IZOD impact strength (X-Y): 3.5 kJ/m²
• Compatibility: FDM 3D printers that support 1.75 mm filament
• Printing speed: 50–100 mm/s or 100–300 mm/s
• Printing temperature: 195–205 °C or 205–220 °C