Sunlu PLA+ 3D printing filament has a tensile strength of 64 MPa and an IZOD impact strength (X-Y) of 3.5 kJ/m². Its consistent diameter and dimensional accuracy of ±0.02 mm help ensure smooth feeding, while low shrinkage and good layer adhesion support reliable prints.

The filament is evenly wound on the spool to help reduce the risk of knots and tangles. It is compatible with FDM printers that support 1.75 mm filament, including models from Bambu Lab, Creality, Prusa, and Anycubic.

• Material: PLA+
• Color: White
• Diameter: 1.75 mm
• Weight: 1 kg
• Packaging: Spool
• Dimensional accuracy: ±0.02 mm
• Tensile strength: 64 MPa
• Elongation at break: 17%
• Flexural strength: 86 MPa
• Young's modulus: 2907 MPa
• IZOD impact strength (X-Y): 3.5 kJ/m²
• Density: 1.23 g/cm³
• Vicat softening temperature: 54 °C
• Heat deflection temperature (HDT): 53 °C
• Melting temperature: 164 °C
• Melt flow rate: 6.3 g/10 min
• Recommended printing speed: 50–100 mm/s at 195–205 °C or 100–300 mm/s at 205–220 °C
• Compatibility: FDM printers that support 1.75 mm filament, including models from Bambu Lab, Creality, Prusa, and Anycubic