Sunlu PLA+ Filament with a diameter of 1.75 mm and white color, ideal for 3D printing. The material stands out for its mechanical properties, with impact resistance up to 8 kJ/m², offering increased durability against wear and maintaining its vibrant color.

• Dimensions: 1.75 mm
• Density: 1.23 g/cm³
• Vicat softening temperature: 54 °C
• Melting temperature: 164 °C
• Tensile strength: 64 MPa
• Flexural strength: 86 MPa
• IZOD impact resistance: 3.5 kJ/m²
• Elongation at break: 17%

The filament features low shrinkage and good interlayer adhesion, ensuring smooth and accurate printing. It is compatible with almost all 3D FDM printers that support 1.75 mm filament. Recommended printing settings: speed 50–100 mm/s at a temperature of 195–205 °C or 100–300 mm/s at 205–220 °C.